Manualshelf

Owner's Manual

ManualsBrandsSharp ManualsPrintersSharp AJ-5030_Interface_Software
11121314151617181920
TOP
TOP
Printing
Index
Introduction
Scanning
Using the Sharp
Control Panel
Table of Contents
Working with
Imaging Files
18
Selecting the Scan Source
If you already have a scanner connected to your computer, you must
specify the scan source in the SHARP Desktop in order to switch
between scanners. Follow the procedure below:
1
Open the Select Source dialog box by selecting Select
Source... from the File menu of the SHARP Desktop.
02.fm Page 18 Monday, February 5, 2001 4:32 PM