Specifications

20
ORIGINAL PLACEMENT
Using the original table
1
Open the original cover/SPF, and place the original.
2
Place an original face down on the original table. Align it with
the original scale and the centring ( ) mark. Gently close the
original cover/SPF.
Setting a large original (AL-1216)
The original cover can be removed to allow copying of bulky objects.
1
Simply lift the original cover straight
up.
2
To reattach the original cover, reverse the above procedure.
3
Do not insert paper in the single bypass when a copy job from the paper
tray is in progress. This will cause a misfeed.
• The original table can read up to A4 (8-1/2" x 14") original.
• Image loss 3mm (3/33") can occur at the leading and trailing edges of
the copies. Also image loss 4.5mm (11/64") in total can occur along
the other edges of the copies.
• When copying a book or an original which has been folded or a
crumpled original, press down the original cover lightly. If the original
cover is not securely closed, the copies may be striped or blurred.
mark
Original scale