!install_ar160205.
!install_ar160205.
!install_ar160205.book 1 ページ 2003年10月9日 木曜日 午後4時48分 INTRODUCTION This manual explains how to install and configure the software that is required for the printer and scanner functions of the machine. The procedure for viewing the Online Manual is also explained. Note • The screen images in this manual are mainly for Windows XP. With other versions of Windows, some screen images may be different from those in this manual.
!install_ar160205.book 2 ページ 2003年10月9日 木曜日 午後4時48分 SOFTWARE FOR THE SHARP AL-1633/1644 The CD-ROM that accompanies the machine contains the following software: MFP driver Printer driver The printer driver enables you to use the printer function of the machine. The printer driver includes the Print Status Window. This is a utility that monitors the machine and informs you of the printing status, the name of the document currently being printed, and error messages.
!install_ar160205.book 3 ページ 2003年10月9日 木曜日 午後4時48分 BEFORE INSTALLATION HARDWARE AND SOFTWARE REQUIREMENTS Check the following hardware and software requirements before installing the software. Computer type IBM PC/AT or compatible computer equipped with a USB 1.1*1 or bi-directional parallel interface (IEEE 1284) Operating system*2 Windows 95, Windows 98, Windows Me, Windows NT Workstation 4.
!install_ar160205.book 4 ページ 2003年10月9日 木曜日 午後4時48分 INSTALLING THE SOFTWARE Note • In the following explanations it is assumed that the mouse is configured for right hand operation. • The scanner feature only works when using a USB cable. • If an error message appears, follow the instructions on the screen to solve the problem. After the problem is solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel" button to exit the installer.
!install_ar160205.book 5 ページ 2003年10月9日 木曜日 午後4時48分 INSTALLING THE SOFTWARE 7 The files required for installation of the MFP driver are copied (if "MFP Driver" was selected in Step 5). 11 Connect the interface cable to the machine and your computer (p. 10). • If you are using a USB cable, make sure the machine's power is turned on and then connect the cable.
!install_ar160205.book 6 ページ 2003年10月9日 木曜日 午後4時48分 INSTALLING THE SOFTWARE INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE) 1 The USB cable must not be connected to the machine. Make sure that the cable is not connected before proceeding. 6 The software packages to be installed will be displayed on the screen. If an incorrect package is displayed, click the "Back" button and select the correct packages. If the cable is connected, a Plug and Play window will appear.
!install_ar160205.book 7 ページ 2003年10月9日 木曜日 午後4時48分 INSTALLING THE SOFTWARE 8 Begin the installation of Button Manager (if "Button Manager" was selected in Step 5). Follow the on-screen instructions. Click the "Finish" button when the message informs you that setup is successful. The Sharpdesk installer will start. 9 Begin the installation of Sharpdesk (if "Sharpdesk" was selected in Step 5). Follow the on-screen instructions.
!install_ar160205.book 8 ページ 2003年10月9日 木曜日 午後4時48分 INSTALLING THE SOFTWARE INSTALLATION IN WINDOWS 95/98/ME/NT4.0/2000 (PARALLEL CABLE) 1 The USB or parallel cable must not be connected to the machine. Make sure that the cable is not connected before proceeding. If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable. Note 2 3 Double-click "My Computer" ( ), and then double-click the CD-ROM icon ( ).
!install_ar160205.book 9 ページ 2003年10月9日 木曜日 午後4時48分 INSTALLING THE SOFTWARE 10 Select the printer port and click the "Next" button. 14 Select "LPT1" for the printer port. Begin the installation of Sharpdesk (if "Sharpdesk" was selected in Step 5). Follow the on-screen instructions. If the following screen appears, click the Caution "Skip" button or the "Continue" button as appropriate to continue the Sharpdesk installation.
!install_ar160205.book 10 ページ 2003年10月9日 木曜日 午後4時48分 CONNECTING TO A COMPUTER Follow the procedure below to connect the machine to your computer. Interface cables for connecting the machine to your computer are not included with the machine. Please purchase the appropriate cable for your computer. Interface cable USB cable Shielded twisted pair cable, high-speed transmission equivalent (3 m (10 feet) max.
!install_ar160205.book 11 ページ 2003年10月9日 木曜日 午後4時48分 CONFIGURING THE PRINTER DRIVER After installing the MFP driver (printer driver), you must configure the printer driver settings appropriately for the number of paper trays on the machine and the size of paper loaded in each. 1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Printers and Faxes".
!install_ar160205.book 12 ページ 2003年10月9日 木曜日 午後4時48分 SETTING UP BUTTON MANAGER Button Manager is a software program that works with the scanner driver to enable scanning from the operation panel of the machine. To scan using the operation panel of the machine, Button Manager must be linked with the scan menu keys on the machine. Follow the steps below to link Button Manager to scanner events.
!install_ar160205.book 13 ページ 2003年10月9日 木曜日 午後4時48分 SETTING UP BUTTON MANAGER Windows 98/Me/2000 1 click the "Start" button, select "Settings", and then click "Control Panel". 2 Double-click the "Scanners and Cameras" icon. Note 3 6 Select "Sharp Button Manager D" in "Send to this application". If the "Scanners and Cameras" icon does not appear in Windows Me, click "view all Control Panel options". Select "AL-XXXX", and click the "Properties" button.
!install_ar160205.book 14 ページ 2003年10月9日 木曜日 午後4時48分 HOW TO USE THE ONLINE MANUAL The Online Manual provides detailed instructions for operating the machine as a printer or scanner. View the Online Manual when you use the printer and scanner functions after the initial setup is completed. Contents of the Online Manual The contents of the Online Manual are as follows. How to use the Online Manual Explains how to use the Online Manual. Print Provides information on how to print a document.
!install_ar160205.book 15 ページ 2003年10月9日 木曜日 午後4時48分 TROUBLESHOOTING If the software does not install correctly, check the following items on your computer. To remove the software, see "Removing the software" (p. 61) in the Operation Manual. Troubleshooting information can also be found in the README files for each of the software programs. To view a README file, click the "Display README" button in the "Select Packages" screen. (p.
!install_ar160205.book 16 ページ 2003年10月9日 木曜日 午後4時48分 TROUBLESHOOTING The MFP driver cannot be correctly installed by Plug and Play (Windows 2000/XP) In Windows 2000/XP, if the MFP driver cannot be correctly installed by Plug and Play (for example, Plug and Play takes place without copying the required files for the MFP driver installation), follow these steps to remove unneeded devices and then install the MFP driver as explained in "INSTALLING THE SOFTWARE" (p. 4).
!install_ar160205.
!install_ar160205.