Specifications

7
GETTING STARTED
PART NAMES AND FUNCTIONS
!7 AUTO IMAGE key and indicator
Press for automatic copy ratio selection.
!8 TRAY SELECT (
) key (p. 15)
Use to manually select a paper tray.
!9 PRESET RATIO selector keys and indicators
(p. 17)
Use to sequentially select preset reduction/enlargement
copy ratios: 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%.
@0 ZOOM indicator (p.17)
Lights up when a zoom ratio is set.
@1 Zoom keys (p. 17)
Use to select any reduction or enlargement copy ratio
from 50% to 200% in 1% increments.
@2 Copy ratio display (
) key (p. 17)
Press and hold down during standby to display the copy
ratio in the copy quantity display.
@3 Copy quantity keys
Use to select the desired copy quantity or to make user
program entries.
@4 CLEAR (
) key
Clears the copy quantity display or terminates a copy
run.
Press during standby to display the total number of
copies made to date.
Part names and functions
GETTING STARTED
Press and hold down the key. 12,345 sheets output
1st display
2nd display
Note: 11" x 17" size copies are counted as two
copies.
@5 START (
) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
Initial settings
The copier assumes the initial settings when it is first
turned on, when the CLEAR ALL (
) key is pressed,
or approximately one minute* after the last copy is made
in any mode.
●
Copy ratio: 100%
●
Exposure: Automatic
●
Copy quantity: 0
●
Paper feed station: Previously selected paper tray
* This time (auto clear time) can be changed. See page
32, USER PROGRAMS.