Owner's Manual

MAKING COPIES

Manual

Place the original on the original table and close the

platen cover.

Use the PRESET RATIO selector ( , ) keys and the

zoom (

, ) keys to select the desired copy ratio.

●

To select a preset reduction or enlargement copy ratio, press the

or key repeatedly until the indicator for the desired copy ratio is

lit.

A. Preset reduction ratios are: 95%, 77%, 64%, and 50% .

B. Preset enlargement ratios are: 121%, 129%, 141%, and 200%.

C. Zoom ratios: Any ratio from 50% to 200% can be set, in 1%

increments. Press the

or key to set the approximate

ratio, then press the

key to decrease the ratio or the

key to increase the ratio.

●

When a zoom ( , ) key is pressed, the ZOOM indicator will

light up and the zoom ratio will be displayed in the copy quantity

display for at least two seconds.

●

To verify a zoom setting without changing the zoom ratio, press and

hold down the copy ratio display (

) key. When the key is released,

the display will return to the copy quantity display.

●

To decrease or increase the zoom ratio rapidly, press and hold down the

or key. However the value will stop at the preset reduction

or enlargement ratios. To move beyond these ratios, release the key and

then press and hold it down again.

D. Same-size reset: Press the or key repeatedly until

the copy ratio returns to 100%.

Ensure that copy paper of the desired size is installed in

the paper tray.

Set the number of copies and press the START ( ) key.

REDUCTION/ENLARGEMENT/ZOOM

Reduction/enlargement/zoom