Service manual

AL-1651CS DISASSEMBLY AND ASSEMBLY 8 - 9
14) Remove two screws and remove the toner motor.
15) Remove the three screws, and remove the DUP motor unit and the
belt.
16) Remove the harness guide.
17) Remove the five screws and the grounding wire, and remove the
main drive unit.
18) Remove the parts as shown below, and remove the pressure
release solenoid and the paper feed solenoid.
1)
2)
1)
1)
2)
3)
1)
2)
1)
1)
1)
CAUTION:Attach the gears securely
3)
3)
1)
1)
2)
2)
4)
4)