Service manual

ManualsBrandsSharp ManualsAll in One PrinterAL-1651CS

AL-1651CS TEST COMMAND, TROUBLE CODES 10 - 14

41 06 OC cover float detection

level (OC FLOAT LEVEL)

[Function]

When this test command is executed, the current set value is displayed. When [ENTER/START] key

is pressed, the mirror base unit moves to the SPF scan position to acquire the OC cover float detec-

tion level.

When the mirror base unit returns to the home position, the acquired value is displayed.

If the detection level is not acquired, ERR display is made. (Default: 0)

Note that, this test command must be executed with the OC cover closed.

∗ If the value is 0, float detection is not performed in normal jobs.

[Operation]

43 01 Fusing temperature setting

(Normal copy) (FU TEMP)

[Function]

When this test command is executed, the current set code number is displayed. Press [

←/→/10KEY]

key to change the setting and press [ENTER/START] key to save the setting into the EERPOM. The

machine goes into the sub code entry standby mode.

[Operation]

The operation is similar to test command 21-01.

04 Fusing temperature setting

in multi coy (FU TEMP

MULTI)

[Function]

For 20th sheet or later in multi copy, the fusing temperature is automatically changed from the temper-

ature set with test command 43-1 to the temperature set with this test command.

When this test command is executed, the current set code number is displayed. Enter the code num-

ber and press [ENTER/START] key to change the setting.

[Operation]

The operation is similar to test command 21-01.

Main

code

Sub

code

Contents Details of function/operation

1) Initial display

2) [ENTER/START]

41-06 OC FLOAT LEVEL

EXECUTING...

After canceling, the machine goes into the sub code entry

standby mode.

3) When the level is acquired:

3) When the level is not acquired:

THE JOB IS BEING

CANCELED.

41-06 OC FLOAT LEVEL

**** OK

41-06 OC FLOAT LEVEL

**** ERR

Code Set temperature (°C) Remark

0 160

1 165

2 170

3 175

4 180

5 185

6 190 Default

7 195

8 200

Code Set temperature (°C) Remark

0 155

1 160

2 165

3 170 Default

4 175

5 180