Specifications
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Two-sided Printing
- Rotating the Print Image 180 Degrees
- Printing a Watermark
- Outline of the Print Status Window
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Troubleshooting
- If a Notice Page is printed
- Printer Driver Features
- About the Web Page
- Configuration via the Web Page
- Index
![](/manual/sharp/al-1651cs/specifications-english/images/img-17.png)
2
SCAN
17
CONTENTS INDEX
Scanning from a TWAIN-Compliant Application
(part 2)
4
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button ( ).
The scanner driver setup screen will appear.
☞
Scanner Driver Settings
5
In the "Scanning Position" menu, select the
location where you placed the original in Step 1.
●
If you placed a one-sided original in the RSPF, select
"SPF (Simplex)".
●
If you placed a two-sided original in the RSPF, select
"SPF (Duplex-Book)" or "SPF (Duplex-Tablet)"
according to the binding position of the original.
6
Click the "Preview" button.
The preview image will appear.
If you selected "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)" in the "Scanning Position" menu, select
whether the orientation of the placed original is "Right
Edge Fed First" or "Leading Edge Fed First".
Note
●
If the angle of the image is not correct, reset the
original, and click the "Preview" button again.
●
If the preview image is not oriented correctly, click the
"Rotate" button in the preview screen. This rotates the
preview image 90 degrees clockwise, allowing you to
correct the orientation without resetting the original.
☞Preview screen
●
If you set multiple pages in the RSPF, the machine
previews only the top page of the originals, and then
sends it to the original exit area. Return the previewed
original to the RSPF before starting the scanning job.
Note