Specifications
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Two-sided Printing
- Rotating the Print Image 180 Degrees
- Printing a Watermark
- Outline of the Print Status Window
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Troubleshooting
- If a Notice Page is printed
- Printer Driver Features
- About the Web Page
- Configuration via the Web Page
- Index
![](/manual/sharp/al-1651cs/specifications-english/images/img-7.png)
1
PRINT
7
CONTENTS INDEX
Opening the Printer Driver From the "Start" Button
You can open the printer driver and change the printer driver settings from the Windows "start" button. Settings adjusted in this way
will be the initial settings when you print from an application. (If you change the settings from the printer driver setup screen at the
time of printing, the settings will revert to the initial settings when you quit the application.)
Windows 2000/XP
1
Click the "start" button, and then click "Control
Panel".
In Windows 2000, click the "Start" button and select "Settings".
2
Click "Printers and Other Hardware", and then
click "Printers and Faxes".
In Windows 2000, click "Printers".
3
Click the "SHARP AL-XXXXCS" printer driver icon
and select "Properties" from the "File" menu.
4
Click the "Printing Preferences" button in the
"General" tab.
The printer driver setup screen will appear.
☞
Printer Driver Settings
Windows 95/98/Me/NT 4.0
1
Click the "Start" button, select "Settings" and
then click "Printers".
2
Click the "SHARP AL-XXXXCS" printer driver icon
and select "Properties" from the "File" menu.
3
In Windows 95/98/Me, click the "Setup" tab.
The printer driver setup screen will appear.
☞
Printer Driver Settings
In Windows NT 4.0, select "Document Defaults" to open
the printer driver setup screen.
Note