Service manual

AL-2041 DISASSEMBLY AND ASSEMBLY 8 - 9
6) Remove the PWB insulation mylar and remove the paper trans-
port detection sensor (POD).
7) Remove two springs and open the intermediate frame unit.
8) Remove the pulleys on the both sides and remove the paper
exit roller.
9) Disengage the pawl, and remove the roller knob.
10) Disengage the pawl, and shift the pulley and the bearing.
11) Remove the paper exit roller, and remove the belt, the pulley,
and the bearing.
2)
1)
1)
2)
4)
2)
1)
3)
1)
2)
3)
4)
1)
2)