Service manual

AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 28
53 08 SPF/RSPF scan position
automatic adjustment
[Function]
Place a A4 paper (white chart) so that it covers the SPF/RSPF scan glass and the OC glass
together, and close the SPF/RSPF.
When this simulation is executed, the current adjustment value is displayed as the initial display.
* Default is 1. Adjustment range is 1 – 99. Adjustment unit 1 = about 0.127mm
* If the values are kept as the default values, SPF/RSPF scan is not performed properly. The
front area of the proper scan position may be scanned.
In case of AUTO, press [START] key, and the mirror unit scans from the home position to the
SPF/RSPF scan position with the adjustment value displayed. The SPF/RSPF glass cover edge
position is calculated from the difference between the SPF/RSPF glass cover edge and the OC
side document glass CCD output level. If the adjustment is normal, the adjusted value is dis-
played. If abnormal, the error LED lights up with the current set value displayed.
During the error LED is lighted, when [START] key is pressed again, execution is performed
again.
[Operation]
The operation is similar to simulation 46-01. (In MANUAL)
OK/ERR display in AUTO
61 03 Polygon motor check
(HSYNC output check)
[Function]
When [ENTER]/[START] key is pressed, HSYNC is performed and the polygon motor is rotated
for 30sec.
At that time, the ZOOM lamp (or the COPY mode lamp for the AL-2050CS) is lighted for
100msec every time when HSYNC is detected.
[Operation] (AL-2050CS only)
63 01 Shading check [Function]
Used to display the detection level of white plate for shading.
When [ENTER]/[START] key is pressed, the mirror base unit moves to the white plate for shad-
ing and the copy lamp is lighted.
When the light quantity is stabilized, revision is made for every second, and the level of one
pixel at the center of CCD which is not corrected is detected and the value is displayed in deci-
mal values on the LCD/display. (3 digits)
[Operation] (AL-2050CS only)
Main
code
Sub
code
Contents Details of function/operation
Mode
Display item
(AL-2050CS)
LED
(AL-2050CS)
Display lamp
(AL-2030/2040CS)
Default
SPF/RSPF scan position
auto adjustment
AUTO COPY mode lamp AE mode lamp 1
SPF/RSPF scan position
manual adjustment
MANU PRINT mode lamp TEXT mode lamp 1
<When OK> <When ERR>
53-08 SPF AUTO
AUTO 100% ** OK
53-08 SPF AUTO
AUTO 100% ** ERR
1) Initial display
61-03 LSU CHK
EXECUTING...
1) Initial display
63-01 SHADING CHK
EXECUTING... 000