Service manual

AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 19

11. RSPF section (AL-2050CS only)

A. Front cabinet, rear cabinet

(1) Open the upper door unit.

(2) Front cabinet and rear cabinet removal

1) Remove two screws.

2) Disengage the five pawls.

3) Remove the front cabinet and the rear cabinet.

B. Upper door unit

1) Release the shaft on the front side.

2) Remove the upper door unit.

C. Document tray unit

1) Release the shaft on the front side.

2) Remove the tray unit.

■ Note for reassembly

Use care so that the paper exit Mylar in not pinched between the

paper exit roller and the follower roller.

D. Upper door open/close sensor

1) Disconnect one connector.

2) Remove the upper door open/close sensor.

E. Reverse clutch, paper exit roller

(1) Reverse clutch removal

1) Disconnect one connector.

2) Remove the resin E-ring.

3) Remove the reverse clutch.

■ Note for reassembly

Attach the stopper of the reverse clutch along with the rib on the

motor mounting plate.