Service manual

AL-2051 UNPACKING AND INSTALLATION 5 - 4
(2) Installation environment and usable software
The following table shows the drivers and software that can be
installed for each version of Windows and interface connection
method.
B. Installing the software
Note:
• If you need to use a different connection method after installing
the software using a USB or network connection, you must first
uninstall the software and then install it using the new connection
method.
• In the following explanations it is assumed that the mouse is con-
figured for right hand operation.
• The scanner feature only works when using a USB cable.
• If an error message appears, follow the instructions on the screen
to solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may
have to click the "Cancel" button to exit the installer. In this case,
reinstall the software from the beginning after solving the prob-
lem.
(1) Using the machine with a USB connection
1) The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If
this happens, click the "Cancel" button to close the window and
disconnect the cable.
Note: The cable will be connected in step 13.
2) Insert the CD-ROM into your computer's CD-ROM drive.
3) Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM icon ( ).
• On Windows Vista/7, click the "Start" button, click "Com-
puter", and then double-click the CD-ROM icon.
• On Windows 2000, double-click "My Computer", and then
double-click the CD-ROM icon.
4) Double-click the "setup" icon ( ).
On Windows Vista/7, if a message screen appears asking you
for confirmation, click "Allow".
5) The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a different
language by selecting the desired language from the
language menu. To install the software in the selected
language, continue the installation with that language
selected.
6) Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
7) To install all of the software, click the "Standard" button and go
to step 12).
To install particular packages, click the "Custom" button and go
to next step.
8) Click the "MFP Driver" button.
Click the "Display Readme" button to show information on
packages that are selected.
9) The files required for installation of the MFP driver are copied.
Follow the on-screen instructions.
When "The installation of the SHARP software is complete."
appears, click the "OK" button.
Caution:
• If you are using Windows Vista or 7 and a security warning
window appears, be sure to click "Install this driver software
anyway".
• If you are running Windows 2000/XP and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click "Continue Anyway" or "Yes".
10) You will return to the window of step 8). If you wish to install
Button Manager or Sharpdesk, click the "Utility Software" but-
ton.
If you do not wish to install the Utility Software, click the "Close"
button and go to step 12).
Note: After the installation, a message prompting you to restart
your computer may appear. In this case, click the "Yes"
button to restart your computer.
Operating System
Cable
Windows
2000
XP Vista 7
Server
2003
Server
2008
MFP
Printer
Driver
USB Yes Yes Yes Yes N.A. N.A.
LAN
Ye s Ye s Ye s Ye s Ye s Ye s
MFP
Scanner
Driver
USB Yes Yes Yes Yes N.A. N.A.
LAN
N.A. N.A. N.A. N.A. N.A. N.A.
Button
Manager
USB Yes Yes Yes Yes N.A. N.A.
LAN N.A. N.A. N.A. N.A. N.A. N.A.
Sharpdesk USB N.A. Yes Yes Yes N.A. N.A.
LAN N.A. Yes Yes Yes N.A. N.A.
Status
Monitor
USB N.A. N.A. N.A. N.A. N.A. N.A.
LAN Yes Yes Yes Yes Yes Yes