Service manual

AL-2051 UNPACKING AND INSTALLATION 5 - 8
(5) Installing the printer status monitor
1) Insert the "Software CD-ROM" (Disc 1) into your computer's
CD-ROM drive.
2) Click the "start" button, click "My Computer" ( ), and then
double-click the CD-ROM icon ( ).
• In Windows Vista/7, click the "Start" button, click "Computer",
and then double-click the "CD-ROM" icon.
• In Windows 2000, double-click "My Computer" and then dou-
ble-click the CD-ROM icon.
3) Double-click the "setup" icon ( ).
In Windows Vista/7, if a message screen appears asking you
for confirmation, click "Allow".
4) The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the license agreement, and
then click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a different
language by selecting the desired language from the
language menu. To install the software in the selected
language, continue the installation with that language
selected.
5) Read the message in the "Welcome" window and then click the
"Next" button.
6) Click the "Standard" button of the "Connect via the network"
menu.
7) Click the "Printer Status Monitor" button.
To view information on the software, click the "Display
Readme" button.
8) Follow the on-screen instructions.
9) When the installation completed screen appears, click the "Fin-
ish" button.
To have the Printer Status Monitor start automatically when
your computer is started, select the "Add this program to your
Startup folder" checkbox.
10) Click the "Close" button in the window of step 6).
Note: After the installation, a message prompting you to restart
your computer may appear. If this message appears,
click the "Yes" button to restart your computer.
This completes the installation.
For the procedures for using the Printer Status Monitor, see the
Help file. Follow these steps to view the Help file:
Click the Windows "start" button, select "All Programs" ("Programs"
in Windows 2000), select "SHARP Printer Status Monitor" and then
select "Help".
C. Configuring the printer driver
After installing the printer driver, you must configure the printer
driver settings appropriately for the number of paper trays on the
machine and the size of paper loaded in each tray.
1) Click the "start" button, click "Control Panel", click "Printers and
Other Hardware", and then click "Printers and Faxes".
• In Windows Vista/7, click the "Start" button, click "Control
Panel" and then click "Printer".
• In Windows Server 2003/ Server 2008, click the "Start" button
and then click "Printers and Faxes".
• In Windows 2000, click the "Start" button, select "Settings",
and then click "Printers".
2) Click the "SHARP XX-XXXX" printer driver icon and select
"Properties" from the "File" menu.
• In Windows Vista/7, from the "Organize" menu select "Prop-
erties".
3) Click the "Configuration" tab and set the printer configuration
based on the options that have been installed.
Set the printer configuration properly.
Otherwise, printing may not take place correctly.
Note: To automatically configure the settings based on the
detected machine status, click the "Auto Configuration"
button.