Service manual

AL-2051 DISASSEMBLY AND ASSEMBLY 8 - 11
18) Remove four screws, and remove the lower paper guide unit.
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b)
so that the black resin (c) of the shifter unit can be checked.
19) Put the lower paper guide unit upside down, remove two
screws, and remove the shifter motor.
20) Remove the screw, and remove the grounding plate and the
gear.
21) Remove the E-ring, the gear, and the bearing, and remove the
shifter roller.
22) Disengage the pawl, and remove the pulley.
23) Shift and remove the shifter unit.
24) Remove four screws, and remove the LSU unit.
1)
1)
1)
1)
2)
a
b
c
1)
2)
1)
2)
3)
1)
2)
3)
3)
4)
1)
1)
1)
2)