Service manual

AL-2051 DISASSEMBLY AND ASSEMBLY 8 - 17
8) Disconnect the connectors.
9) Remove the five screws, and remove the MCU PWB. (The
shape of the MCU PWB differs depending on the model.)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
8. Power section
A. List
B. Disassembly procedure
1) Disconnect each connector.
2) Remove the screw, and remove the earth line.
3) Remove two screws, and remove the power PWB unit.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
9. Duplex motor section
A. List
B. Disassembly procedure
1) Remove the rear cabinet.
2) Remove two screws.
3) Remove the Duplex motor cover.
4) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motor
gear with the belt on the main body side.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
No. Part name Ref.
1Power PWB
2)
3)
1)
2)
2)
1)
1)
1)
1)
1)
1)
1)
1)
1)
2)
3)
4)
4)
5)
1)
1)
No. Part name Ref.
1 Duplex motor
1
2
3
1