User Manual

HOW TO USE THE FAX FUNCTION
9090
9090
90
8
StepStep
StepStep
Step
Press these keysPress these keys
Press these keysPress these keys
Press these keys
CommentsComments
CommentsComments
Comments
11
11
1 “TIMER MODE” will appear in the
display.
22
22
2
Select SET. “TIMER COMM. #=1”,
“TIMER COMM. #=2” or “TIMER
COMM. #=3” will appear in the
display.
33
33
3 Select “SEND MODE” or “POLLING
MODE”.
44
44
4 Enter the time of the operation (2
digits for the hour and 2 digits for
the minute).
(example)
55
55
5 Enter the code for the day of the
operation. If the operation will be
performed within 24 hours, just
press the
ENTERENTER
ENTERENTER
ENTER key.
66
66
6 “ENTER NUMBER” will appear in
the display.
77
77
7 Enter the fax number of the other
machine using one of the following
methods:
• Press a Rapid key.
• Enter a Speed Dial number
with the number keys.
88
88
8 “SET RESOLUTION & CONTRAST
THEN ENTER” will appear in the
display.
99
99
9
If this is a transmission operation,
adjust the resolution and/or contrast
if desired. (Otherwise, skip this step.)
1010
1010
10 “LOAD ORIGINAL(S)” will appear in
the display. If the original is already
loaded, no message will appear in
the display.
After loading the original, it is
scanned into memory. Then the
original can be sent at the time you
selected, or polling can be
performed.
(example)
Special Functions
(optional)
(example)
FUNCTION
oror
oror
or
DEF
ABC
ABC
JKL
ENTER
ENTER
ENTER
ENTER
RESOLUTION
CONTRAST
ENTER
oror
oror
or
To set a timer operation:
SUK 08 USING FAX LEO.p65 17/04/00, 13:4790