User Manual

103103

103

GETTING STARTED

Connecting the interface cabConnecting the interface cab

Connecting the interface cab

lele

To use the FO-3800M as a laser printer or scanner, connect it to your computer

using a parallel interface cable.

Use the parallel interface cable included with the FO-3800M.

For specifications of the parallel interface, see page 128.

Check that the power switches of both the machine and the computer

are in the OFF position.

Plug the parallel interface cable into the printer interface connector.

Fasten the two bail clips at the side of the printer connector to hold the

interface connector in place.

Plug the other end of the cable into the parallel interface connector on

your computer. (Refer to your computer manual for details.)

This machine sends and receives data bi-directionally and at high

speed. Some switch boxes and pass-through devices cannot

support high-speed, bi directional transfer of data, and using them

may cause printing errors.

Interface connector

Cable

Parallel interface

connector

Bail clip

SUK 10 PREPARATION LEO.p65 17/04/00, 13:28103