User Manual

HOW TO USE THE FAX FUNCTION
8989
8989
89
8
The timer function allows you to set a transmission or polling operation to be
performed automatically at a time you specify. Up to three transmission
operations or polling operations can be set at any one time, and the times
they will be performed can be specified up to a week in advance.
Note:Note:
Note:Note:
Note: You can use this function only when you send the document from the
SPF.
You can use this function, for example, to take advantage of lower night time
telephone rates without having to be there when the operation is performed.
• For a timer transmission, scan the original into memory when you set the
transmission. Scanning the original into memory is convenient because you
do not have to worry about original mix-ups or forgetting to load the original.
• If the memory becomes full while the original is being scanned, “MEMORY
FULL” will appear in the display.
• Press the
FF
FF
F
AX STAX ST
AX STAX ST
AX ST
ARAR
ARAR
AR
TT
TT
T key to transmit the pages that have been stored
up to that point in memory.
• Press the
STST
STST
ST
OPOP
OPOP
OP key to cancel the entire transmission.
Note:Note:
Note:Note:
Note: In Reverse Sending mode, you must press the
STST
STST
ST
OPOP
OPOP
OP key to cancel the
entire transmission when “MEMORY FULL” appears in the display.
• Code numbers are used to specify each day of the week. Refer to the table
below when making time settings which include a specified day.
Timer OperationsTimer Operations
Timer OperationsTimer Operations
Timer Operations
Day
Code
Sunday
0
Monday
1
Tuesday
2
Wednesday
3
Thursday
4
Friday
5
Saturday
6
Special Functions
SUK 08 USING FAX LEO.p65 17/04/00, 13:4789