Operation Guide, GB
Table Of Contents
- CONTENTS
- INTRODUCTION
- BEFORE USING THE MACHINE
- COPY FUNCTIONS
- PRINTER FUNCTIONS
- BASIC PRINTING
- PRINTER DRIVER SETUP SCREEN
- SETTING ADVANCED PRINTER FUNCTIONS
- PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing)
- FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size)
- ROTATE THE PRINTED IMAGE 180 DEGREES (Rotate 180 degrees)
- ENLARGING/REDUCING THE PRINTED IMAGE (Zoom)
- ADJUSTING THE IMAGE EXPOSURE (image adjustment)
- ADDING A WATERMARK TO PRINTED PAGES (Watermark)
- SAVING FREQUENTLY USED PRINT SETTINGS
- SCANNER FUNCTIONS
- TROUBLESHOOTING
- ROUTINE MAINTENANCE
44
TROUBLESHOOTING
Main code will be displayed upon machine error, and the sub code will be displayed when the "start" key is pressed.
The display interval between the two main codes is about 0.5 second. The interval for the cyclic display of the two
codes is 0.25 second. The display interval of the sub codes is the same as that of the main codes (See the following
display example for the error code of LED indicator).
Example: L1-00
Main Code
Sub Code
Main Code
If do not press the copy start
button, after a brief interval, the two
Main Code repeatedly display.
Press the
copy start button to
show the
sub code
Release the copy start button
main code display
The two Sub Code are repeatedly
display after a brief interval.