AL-1633/1644 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Index
3
SCAN
20
CONTENTS INDEX
Scanning from a TWAIN-Compliant Application
(part 1)
The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be used with a variety of TWAIN-compliant
applications. Below is a step-by-step guide for acquiring a scanned image to the Sharpdesk desktop screen using Sharpdesk.
1
Place the original(s) you wish to scan on the
document glass/SPF.
☞
For information on setting an original for scanning,
refer to "NORMAL COPYING" in the Operation
Manual.
2
Start Sharpdesk and then click the "File" menu
and select "Select Scanner".
3
Select "SHARP MFP TWAIN D", and click the
"Select" button.
The method for accessing "Select Scanner" depends
upon the application. For more information, refer to the
manual or the help file of your application.
Note
If you are using Windows XP, you can also select
"WIA-SHARP AL-XXXX" to scan using the WIA driver.
☞Scanning from a WIA-Compliant Application
(Windows XP)
Note