AL-1633/1644 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Index
3
SCAN
21
CONTENTS INDEX
Scanning from a TWAIN-Compliant Application
(part 2)
4
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button ( ).
The scanner driver setup screen will appear.
☞
Scanner Driver Settings
5
In the "Scanning Source" menu, select the
location where you placed the original in Step 1.
If you placed a one-sided original in the SPF, select
"SPF (Simplex)".
6
Click the "Preview" button.
The preview image will appear.
●
If the angle of the image is not correct, reset the
original, and click the "Preview" button again.
●
If the preview image is not oriented correctly, click the
"Rotate" button in the preview screen. This rotates the
preview image 90 degrees clockwise, allowing you to
correct the orientation without resetting the original.
☞Preview screen
●
If you set multiple pages in the SPF, the machine
previews only the top page of the originals, and then
sends it to the original exit area. Return the previewed
original to the SPF before starting the scanning job.
Note