AL-1633/1644 Operation-Manual Online-Manual GB
Table Of Contents
- Introduction
- How to Use the Online Manual
- Contents
- Basic Printing
- Opening the Printer Driver From the "Start" Button
- Printer Driver Settings
- Printing Multiple Pages on One Page
- Fitting the Printed Image to the Paper
- Printing a Watermark
- Outline of the Print Status Window
- Sharing the Printer Using Windows Networking
- Shared Printer Settings
- Client Settings
- Scanning Overview
- Scanning from a TWAIN-Compliant Application
- Scanning from a WIA-Compliant Application (Windows XP)
- Scanning from the "Scanner and Camera Wizard" (Windows XP)
- Outline of Button Manager
- Button Manager Settings
- Index
3
SCAN
26
CONTENTS INDEX
Scanning from a WIA-Compliant Application (Windows XP)
(part 2)
3
Select the paper source and picture type, and
click the "Preview" button.
The preview image will appear.
If you placed the original on the document glass, select
"Flatbed" for the "Paper source".
If you placed the original in the SPF, select "Document
Feeder" for the "Paper source" and specify the original
size in "Page size".
4
Click the "Scan" button.
Scanning begins and the image is acquired into Paint.
Use "Save" in your application to select a file name and
folder for the scanned image, and save the image.
To cancel a scanning job after clicking the "Scan"
button, click the "Cancel" button.
●
If an SPF is not installed on your machine, the "Paper
source" menu will not appear.
●
If you select "Document Feeder" for the "Paper source"
and click the "Preview" button, the top original in the
SPF is previewed. The previewed original is sent to the
original exit area, so you will need to return it to the
SPF before starting the scanning job.
●
To view Help for a setting, click the button in the
upper right-hand corner of the window and then click
the setting.
Note