user manual

: Jan. 9 2004
1
AR-CF2 PRODUCT OUTLINE 1 - 1
[1] PRODUCT OUTLINE
This inserter is an optional unit for the AR-620 series of digital complex
machines. With the inserter installed, blank sheets or printed sheets
can be inserted as covers (made of cardboard) or tabbed sheets with-
out being subject to the printing process (and without passing through
a fixing unit). When the inserter is combined with a finisher (optional)
and a punch unit (optional), printed sheets can proceed to the hole
punching or stapling process without being subject to the copying pro-
cess (or without passing through the main unit).
[2] SPECIFICATIONS
1. Basic specifications
A. Performance
B. Compatible paper types
C. Mechanical specifications
2. Electrical specifications
3. Environmental conditions
4. Compliance
Type of Installation Floorstanding
Delivery speed Through mode
(Horizontal transportation):
800mm/sec
Straight mode:
800mm/sec
Saddle mode (Reverse):
420mm/sec
Productivity 50 cpm (when A4 or letter-sized insert sheets
are continuously transported/saddle mode not
applicable)
Transport
reference
Center reference through (when horizontally
transported)
Loading capacity 100 sheets max. (80 g/m
2
or less)
Maximum loading height: 12 mm (80g/m
2
or
greater)
Maximum loadable sheets: 30 (127g/m
2
or
greater)
Factor 0.6 or less applied to above limitations
for special papers
Offline function Provided
Manual operation
section
Equipped with keys and LEDs
Stapling Possible
Saddle stitching
(With folding)
Possible
Punching Possible
Paper jam handling Paper feed/Transport unit Paper feeding
cover open/close
Horizontal transport unit Transportation
guide open/close
Paper weight 60 – 256gm
2
(Normal paper, whose thickness
should be less than 256µm)
Types Normal paper, special paper (OHP films, colored
paper, punched paper, tabbed paper)
Special papers OHP films: Saddle mode (reverse) not applicable
Punched paper: 2, 3, or 4 holes
2 holes (φ6.5): Hole pitch: 80mm
2 holes (φ8): Hole pitch: 70mm
3 holes (φ8): Hole pitch: 108mm+108mm
4 holes (φ6.5): Hole pitch:
80mm+80mm+80mm
4 holes (φ6.5): Hole pitch:
21mm+70mm+21mm
Paper sizes
Ledger (LD), Legal (LG), Letter (LT), Letter R
(LTR), Foolscap, Executive R, Invoice R
1
1
Size detection The 3 destinations below are user-definable
cm: A3, B4, A4, A4R, B5, B5R, A5R
(Foolscap is manually specified on the
operation panel of main unit)
inch: LD, LG, LT, LTR, Executive R, Invoice R
∗ Mixed loading is not possible. When offline, sta-
pling and punching are possible only for papers
that have the identical width (A3 and A4, B4 and
B5, LD and LT). Note that compatibility with the
finisher is not considered.
Paper sizes that
can be stapled
Compliant with the specifications both of the main
unit and the finisher.
Paper sizes that
can be saddle
stitched
Compliant with the specifications both of the main
unit and the saddle finisher.
Paper sizes that
can be punched
Compliant with the specifications both of the main
unit and the punch unit.
External
dimensions
Product
dimensions
(W) 320 x (D) 580 x (H) 1060 mm
∗ Latch unit and tray unit
excluded.
Packaged
dimensions
(W) 1295 x (D) 680 x (H) 516 mm
Footprint (W) 320 x (D) 580 mm
∗ Latch unit and tray unit
excluded.
Weight Product weight Approx. 23kg
Package weight Approx. 32kg
Item enclosed Inserter: 1
Input voltage Supplied from the main unit
DC+24V ± 10%
DC +5V ± 5%
Power consumption DC+24V: 58.3W max.
DC +5V: 1.1W max.
Operating
conditions (normal
operation)
Temperature 5 – 35°C
Humidity 20 – 85%RH (No condensing)
Transport/storage
environment
Temperature –20 – 50°C
Humidity 10 – 90%RH (No condensing)
Safety standard UL: 60950 the 3rd edition
C-UL: CAN/CSA-C22. 2 No.60950 the 3rd edition
CE: EN60950 ITS (German GS mark)
Electromagnetic
Compliance
VCCI: Class B
FCC: Class B
CE: EN50081-1 EN55024
1