User Manual

Please prepare the following:

• Cushion (soft cloth, etc.)

• Tools (Phillips screwdriver)

Caution:

• If, due to insufficiently secure attachment or poor handling, the LCD monitor falls or is damaged in other similar

ways, please note that SHARP Corporation will not bear any responsibility.

Attachment

Before attaching the speaker system to the LCD monitor, please make sure to switch off the LCD monitor’s power

and disconnect the power plug from the outlet.

1 Remove the back cover at the rear of the LCD display unit.

2 Remove the screws at the rear of the LCD display unit.

Back cover

Please protect it with a cushion

or a similarly soft cloth to

protect the display against

damage.

Remove the (four) screws

Rear cover

Speaker system

Supplied speaker system fixing screws

Weight

Approx. 3.5 kg

Approx. 13.3 kg

(LCD display unit)

Approx. 3.5 kg

(AVC system)

Back cover

Cable clamps

Please insert

3 Install the speaker system.

• Never insert the speaker system fixing screws in the provided holes without attaching the speakers. If inserted

without the speakers, they will damage the internal parts. Therefore, only insert the supplied speaker system

fixing screws when installing the speaker system.

4 Attach the cables and re-attach the back cover at the rear of the LCD display

unit.

• The cords are fixed using the cable clamps.

Precautions when transporting the LCD display unit

■ When transporting the display, never carry it by holding onto the speakers. Be sure to always carry the display

by holding it with two hands – one hand on each side of the display.

Display (rear panel)

– 2 – – 3 –

Item Name

Speaker system AN-28SP2

LCD monitor LC-28HM2