Operating instructions

The temperature of the wine cooler can be set anywhere between 4℃ to 18℃ by the temperature up ▲
and temperature down ▼pads as follows:
(1) Press the [SET] pad until you hear a "beep" sound (approximately 2 seconds).
(2) Press the ▲▼ pads to increase or decrease the desired temperature in increments of one degree.
(3) Press the [SET] pad to confirm your choice - if no pad is pressed within 10 seconds your choice will be
automatically confirmed.
. The temperature display can be changed between Celsius and Fahrenheit by pressing and holding
the ▲ pad for approximately 2 seconds.
.
(1) It remains ON during the refrigeration cycle; (2) It remains OFF during the idle cycle.
. To switch the interior light on/off, simply press the pad.
1.
2.
3.
4.
NOTES:
The indicator indicates status of the refrigeration cycle as follows:
MANUAL TEMPERATURE SETTING:
6
ILLUSTRATION OF THE APPLIANCE
TEMPERED GLASS DOOR:
Allows easy interior visibility.
CHROME PLATED SHELVES:
Removable for easy cleaning.
MAGNETIC GASKET: Tight fitting door
THERMOSTAT:
inside. No hooks or latches.
For controlling the temperature inside the
wine cooler.
seal keeps all the cooling power locked
Downloaded from www.vandenborre.be