PORTABLE LIFTER INSTRUCTION BOOK MODEL CM-270H1 CM-340H1 CM-520H1 SAFETY
K.S.F. CERTIFICAT CE ou DECLARATION DE CONFOR Directive CE 98/37 avec modification CE 98/79 Suivant la réglementation CE - Machine ce document est appelé Certi il est fourni pour une machine individuelle qui peut être mise en se sa livraison. Il sert aussi de Déclaration de conformité lorsque le p est intégré dans une machine ou installation.
K.S.F. WARNING SYMBOL To maintain the operation safety of this machine, the user shall read the included cautions in this manual very carefully to make sure of your personal safety, and to protect the equipment itself from damage. The cautions in the equipment will be indicated by the safety marks. The individual safety marks are as the follows. WARNING SYMBOL 1. Electric Shock Danger. Danger of High Voltage Danger of limbs and/or clothing drawn into the machine.
K.S.F. If there is any condition of taking off or damage, assure to change it at once. Qualified Personnel Only the qualified personnel is allowed to install and use this equipment. The qualified personnel is authorized to move, install and operate the machinery according to the setup Safety Practice and Standard. Correct Usage This equipment only can be used by the methods described in the Specification List of this Index.
K.S.F. We are very appreciated for your adopting CM Series of Portable Lifter. Our company is the team insisted in High Quality and Excellent Technology to manufacture all types of professional equipment to help the customers to create high profits and high quality products. CM Series Portable Lifts are the professional equipments to install, position and lifting: .Electric Curly Doors. .Iron Racks .Pipe Equipment of Freezing .Air Coolers, .Air Conditioners .Indoor Machinery .Water Freezers .
K.S.F. INDEX 1. PRECAUTIONS & WARNING----------------------------------------------- 6 2. TRANSPORTING THE PORTABLE LIFTER----------------------------- 9 3. STORAGE------------------------------------------------------------------------ 9 4. CHECK --------------------------------------------------------------------------- 10 5. LEGEND ------------------------------------------------------------------------- 11 6. SET UP -------------------------------------------------------------------------- 12 7.
K.S.F. 1. PRECAUTIONS & WARNING ！ HAZARDS This instruction book shall be put in an easily accessible location for all users. FAILURE TO OBEY THE INSTRUCTIONS AND SAFETY RULES MAY RESULT IN DEATH, SERIOUS INJURY AND PROPERTY DAMAGE. 1. DO NOT use this equipment to life people or as a ladder or step. 2. DO NOT stand under or allow person to stand under the Portable Lifter while it's raising or raised. 3. DO NOT use Portable Lifter with a worn, frayed, kinked or damaged steel cable. 4.
K.S.F. 13. DO NOT lower the load unless the area below is clear of personnel and obstructions. 14. DO NOT place ladder or scaffolding against any part of this unit. 15. No untrained or unauthorized personnel to operate the machine. Proper training and instruction is needed to maintain safe operations. 16. DO NOT disassemble and part of this unit. Contact distributor for assistance. 17. DO NOT use or operate the Portable Lifter for operations outsides of recommended specifications in this instruction book.
K.S.F. 4.Keep the work space and surroundings clean and tidy. Working in dirty or dark surroundings could cause an accident. 5. DO NOT operate the machine on any unsteady surface. The machine must be kept steady and balanced when in use. 6. DO NOT operate the machine in strong or gusty winds. 7. If the loading objects are over-weight or large, it will reduce the balance of the machine, just as the machine operating under the strong winds.
K.S.F. 4. The Portable Lifter is equipped with Level Device. (Exception Model CM-270H1). Checking if it's in the condition of leveling before raising. 5. Ensure the steel cable is A): not worn or frayed. B): not derailed and not caught in obstructions. C): not hooked by abnormal objects causing unusual friction or possibility of derailing. 6. Ensure the manual handle IS NOT installed in the manual shaft. 7. Ensure the power supply is correct voltage before connecting the machine. 8.
K.S.F. 2. The Portable Lifter should be stored on a flat surface. DO NOT place heavy objects on it. If stacking, please handle it according to the instructions on the outer carton. 3. The Portable Lifter must be stored in an area with no vibration or risk of the machine being knocked or damaged. 4. All spare parts should be stored with the unit. 5. Children should not have access to the area where the Portable Lifter is stored. 6.
K.S.F. 5.
K.S.F. 6. SET UP 1. Take off the belt mounted on the mast. 2. Loosen the screw of Slide Ring and expending the LEGS. 3. Tighten the screw of Slide Ring. 4. Squeeze the TRIGGER as shown by your hand to sliding the telescoping LEG out. (Only Model CM-340H1, CM-520H1have this function.) Extending 4 LEGS until reach the ground. ~12~ 5. Model CM-340H1, CM-520H1 equipped with the LEVEL, make sure the machine is set up in level status.
K.S.F. 6. Model CM-340H1, CM-520H1 equipped with the telescope feet. You can use it on stair way as shown. MAKE SURE SET IT IN LEVEL STATUS. 7. Put the Platform on and tighten the screw below to fixed it. Take off the belt and unfold the platform. 8. OPTIONAL FUNCTION: MODEL: CM-340H1 have optional function to work against the wall.
K.S.F. 9. OPTIONAL FUNCTION FOR CM 520H1 : CM-520H1 have optional function for work against the wall. Shift the pin from the forth leg to lock the higher pin hole for working against the wall. 10. Transportation wheels of CM-520H1, Set up the transportation wheels as follow instruction.
K.S.F. 7. Pre-operation Inspection 1. Check before operation 1-1 Before plugging, please make sure the voltage is right. 1-2 BEFORE RAISING, PLEASE MAKE SURE THE ATTACHED MANUAL HANDLE IS NOT SET IN MANUAL SHAFT. 1-3 BEFORE RAISING, PLEASE MAKE SURE EMERGENCY STOP BUTTON IS COMPLETELY PULLED UP AS SHOWN, IF NOT, THE MOTOR IS RUNNING BUT THE MAST CAN NOT BE RAISING, JUST LIKE OPERATE IN MANUALLY.
K.S.F. 8. RAISING AND LOWERING LEVER TRIGGER 1. RAISING: Shift the LEVER to UP mark side of the switch box and press the TRIGGER to raising. ALWAYS ACCORDING THE UP AND DOWN MARK AS SHOWN ABOVE ON THE HANDLE BOX TO OPERATING RAISING OR LOWERING. 2. LOWERING: Shift the LEVER to DOWN mark side of the switch box and press the TRIGGER to lowering. 3. The switch is variable speed control, press TRIGGER slightly can be soft start. Press TRIGGER deeper for raising or lowering faster.
K.S.F. ANTI - REVERSE DEVICE !! IMPORTANT !! YES!! RIGHT!! NO!! WRONG!! THE AUTOMATIC OVERLOAD BREAKER STARTED IS SOUND LIKE " DA. DA. DA. DA", AND THE PORTABLE LIFTER WILL STOP RAISING AT ONCE EVEN THE MACHINE IS NOT REACH THE TOP. In this situation, check the LEVER at first. If the LEVER is not at the UP side position, shift it to the UP side and the machine will lowering. After lowered, keep the LEVER at the UP side, and operating raising once again.
K.S.F. 9. EMERGENCY STOP BUTTON , MANUALLY 1. When the unexpect situation is happening, press the emergency stop button, the machine will stop raising or lowering immediately. 2. Manually: Mounted the manual handle on and rotate it raising or lowering. WARNING!! When operation in manual, operator must be squatting below the basic height of Portable Lifter. 3. Pull the Emergency Stop Button up to operating in electrically.
K.S.F. 10. DISASSEMBLY 1. Fold the platform and put the belt on. 2. Loosen the screw below the platform and lift the platform off the cylinder. 3. Loosen the screw of the Slide Ring and fold the LEGS up, then fasten the screw of the Slide Ring back.
K.S.F. 11. ORDINARY EXAMINATION No. POSITION ITEMS TOOLS RESULT 1. Telescoping Mast Lubrication 1. Check the mast is Lubricated or not. 2. Brush, Normal Engine Oil Because of the usage of machine, it will be covered with dust or dirt. So, to avoid the Stuck of cylinder and can not raising. Machine must be kept in proper lubrication. 2. Steel Cable Tearing or frayed. Check Steel Wire has been Torn off or other abnormal condition or not. Steel Cable been tearing or frayed.
K.S.F. 12. APPENDIX Specification Model Specification CM-270H1 CM-340H1 Voltage 110V Or 220V Current 110V-8A , 220V-4A CM-520H1 3.5M↑ 90KGS Load Weight Weight 120KGS Body 14.2KGS Platform Height LengthWidth 120KGS 21KGS 3.5M↓120 KGS 37.5KGS 5.3KGS Basic Height 85CM 95CM 105CM Lifting Height 270CM 340CM 500CM Store 15*15CM 30*30CM 38*38CM Operating 99*99CM 152.5*152.5CM 198.5*198.5CM Length of Control Wire 2.7M Length of Electric Wire 3.4M 2.
K.S.F. 13.
K.S.F.
K.S.F.
◎2009.07/Copyright by KSF.
