Specifications
Easy to Use Functions
-89
4 Press to move the inset pic-
ture.
• The inset picture will be moved to the
inset picture frame.
Note
• The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
• The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
• With a resolution that exceeds SXGA.
• When the input signal is 480
I, 480P,
720P or 1080
I.
• When the input signal has changed to
the Interlace mode using RGB signals.
• When the picture display mode is set to
“DOT BY DOT”.
• When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
• You can use
on the GyroRemote or
on the projector to change the inset
picture.
Activating the sRGB Color Management Function
Setting the Color Manage-
ment Function (sRGB)
Select “sRGB” in the “Options (1)” menu
on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55.
Note
•
For additional information about sRGB
function, please visit “http://www.srgb.com/”.
Info
• When setting sRGB to “ON”, the pro-
jected image may become dark; however,
this does not indicate a malfunction.
When “sRGB” is set to “ON”;
• The gamma correction cannot be set.
• “Red”, “Blue” or “CLR Temp” in “Picture”
cannot be adjusted.
This function calibrates the projector’s output to conform to “sRGB standard (6,500K)”.