Specifications

-22
3 Set each item under “TCP/IP” and “Wireless LAN”.
■ “TCP/IP”
“Obtain an IP address automatically”
Make sure to enable when using the DHCP server function in the projector.
When this function has been selected, the following TCP/IP setting items will
appear gray and no entry is necessary.
“IP Address”
Enter the computer’s IP Address.
“Subnet Mask”
Enter the subnet mask.
“Gateway”
Enter the gateway address.
■ “Wireless LAN”
“Communication Mode”, “Ch”
Select the wireless LAN transmission mode and the wireless LAN channel to be
used. When using the projector, make sure to change “Communication Mode”
to “Peer-to-Peer”, and the settings on the computer and projector are the same.
“SS ID”
Enter the SS ID (Group name).
When the SS ID has been set, make sure to use the same settings on the
projector.
“Encryption (WEP)”
Select this function to whether or not to encrypt.
(This function is not supported.)
“Wep key”
Enter the encryption key when encrypting.
(This function is not supported.)
4 Click “Save” to register the settings.
The settings will be registered and the dialog box will close.
Click “Cancel” to close the dialog box without registering the settings.