Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Affixing the Stand Hole Protection Covers
- Preparing the Remote Control Unit
- Removing the Handles (PN-80SC5/PN-70SC5 only)
- Mounting a web camera
- Turning Power On/Off
- Touch action
- Basic Operation
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
24
E
Basic Operation
n
Switching the screen size
Even when the screen size is changed, the display may remain the same depending on the input signal.
INPUT SIGNAL WIDE *
1
UNDERSCAN Dot by Dot NORMAL
16:9 video
1920×1080,
1280×720 etc.
Displays image so it
lls the entire screen.
Displays the video
according to the input
signal.
Display to the edge
of the input signal is
possible.*
2
Displays the dots of
the input signals as the
corresponding dots on
the screen.
Displays image so it
lls the entire screen
without changing the
aspect ratio of the input
signal.
Video other than 16:9
640×480,
800×600,
1024×768,
1280×1024 etc.
Displays image so it
lls the entire screen.
Displays the video
according to the input
signal.
Display to the edge
of the input signal is
possible.*
2
Displays the dots of
the input signals as the
corresponding dots on
the screen.
Displays image so it
lls the entire screen
without changing the
aspect ratio of the input
signal.
*
1
For HDMI1/HDMI2/HDMI3/D-SUB (PC), WIDE produces the same display as UNDERSCAN.
*
2
Some software may cause noise or distortion at the edges or top of the screen, however, this is not a failure. In this event, set
the screen size to WIDE.
TIPS
• Using this monitor’s screen-size switching to compress or expand the screen for commercial or public viewing in
establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be
careful.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When 4:3 video is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the video
may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to “NORMAL”.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.