Operation Manual, User's Manual

1-91
BEFORE USING THE MACHINELOADING PAPER
Types of paper that can be set in each tray
*1 when a 600-sheet paper feed unit is installed
*2 when two 600-sheet paper feed units are installed
*3 when three 600-sheet paper feed units are installed
*4 "Plain Paper 1" is plain paper 60 to 89 g/m
2
(16 to 24 lbs. bond), "Plain Paper 2" is plain paper 90 to 105 g/m
2
(24
to 28 lbs. bond).
*5 "Heavy Paper 1" is heavy paper up to 176 g/m
2
(65 lbs. cover), "Heavy Paper 2" is heavy paper up to 220 g/m
2
(80
lbs. cover).
*6 Some envelopes may not be usable due to the shape of the flap or the type of envelope. For envelopes that can be
used, see "
Tray Settings (page 1-104)".
For detailed information on the sizes and types of paper that can be loaded into each tray of the machine, see
"SPECIFICATIONS" in the "Start Guide" and "Tray Settings (page 1-104)
".
Recycled paper, coloured paper and pre-punched paper must meet the same specifications as plain paper.
Before using any paper, consult the dealer or nearest authorised service representative.
Tray 1 Tray 2
*1
Tray 3
*2
Tray 4
*3
Bypass tray
Plain Paper 1
*
4
Permitted Permitted Permitted
Plain Paper 2
*
4
Permitted Permitted Permitted
Heavy Paper 1*
5
- Permitted Permitted
Heavy Paper 2*
5
- Permitted Permitted
Thin Paper - Permitted Permitted
Pre-Printed Permitted Permitted Permitted
Recycle Paper Permitted Permitted Permitted
Letter Head Permitted Permitted Permitted
Pre-Punched Permitted Permitted Permitted
Colour Permitted Permitted Permitted
Labels - - Permitted
Glossy Paper - - Permitted
Transparency - - Permitted
Envelope*
6
- - Permitted