AN-SV100T Operation-Manual Installation-Manual GB

10
Attaching the Ceiling-mount Rotating Module
 Turn over the projector and place it upside down on a fl at surface.
Remove the connector cover.
 Place the ceiling-mount rotating module on the bottom of the
projector so that it is aligned with the module installation holes on the
projector. (Make sure the three position-setting pins on the module
are inserted into the position-setting holes on the projector.)
AN-SV100T.indb10AN-SV100T.indb10 2011/05/2515:55:562011/05/2515:55:56