ENGLISH ESPAÑOL OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN FRANÇAIS LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d’emploi avant de commencer à utilliser l’appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
ENGLISH LC-32D59U LC-42D69U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK,MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS 18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions.
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
IMPORTANT SAFETY INSTRUCTIONS Caring for the Cabinet • Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet. • Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking. • Wiping with a hard cloth or using strong force may scratch the surface of the cabinet. • If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
QUICK REFERENCE Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit ( X1) Page 11 “AAA” size battery ( X2) Page 13 AC cord ( X1) Page 10 42” 32” Stand ( X1) with Screws Page 8 Operation manual ( X1) • Always use the AC cord supplied with the TV. • The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE Detaching the stand neck for wall mounting CAUTION • Please use care when disassembling cabinet, stand, and pillar for wall mounting. • Detach the stand neck in the correct direction. • Do not remove the stand neck from the TV unless using an optional wall mount bracket to mount it. 1. Loosen the 4 screws that secure the stand neck by using a cross-head screwdriver. Remove stand cover from the TV set. 32’’/42’’ Stand Cover • To attach the stand neck, perform the steps in reverse order.
QUICK REFERENCE Quick Installation Tips 1 Attach your antenna to the back of the television. (See page 12.) 2 Connect the AC plug for the television into the AC outlet. 3 How to turn on the television for the ?rst time. A) Press POWER on the television. B) The POWER indicator on the front of the television lights off. CH VOL + POWER indicator MENU INPUT AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach.
QUICK REFERENCE Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Remote Control sensor 45º (4m) Horizontal only POWER indicator 30º (5m) Horizontal & Vertical 0º (8 m) ■ Cautions regarding the remote control unit • Do not expose the remote control unit to shock.
Preparation Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially available). 2.
Preparation Installing Batteries in the Remote Control Unit If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 3 Close the battery cover. 2 Insert two “AAA” size batteries (supplied with the product). • Place the batteries with their terminals corresponding to the (, ) and (. ) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion.
Contents IMPORTANT INFORMATION ...................................................................................... 1 TRADEMARKS ............................................................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ...................................................................... 3 QUICK R EFERENCE .................................................................................................... 8 Supplied Accessories .........................
Part Names TV (Front) POWER indicator Remote control sensor Light sensor TV (Side/Rear) *2 *1 Channel buttons (CH / ) CH HEAD PHONE HEAD PHONE INPUT 1 VOL + Volume buttons (VOL+ / _) INPUT 2 *3 USB MENU INPUT POWER MENU button INPUT 1 terminal (HDMI) INPUT 2 terminal (HDMI) USB AC IN *1 INPUT button POWER button RS-232C IOIOI Y PB PR L- AUDIO -R Y PB PR L- AUDIO -R VIDEO L- AUDIO -R DIGITAL AUDIO *1: See pages 19, 20, 21 and 22 for external equipment connection.
Part Names Remote Control Unit 6 1 2 3 4 5 6 7 8 9 / 17 18 19 20 21 22 23 + ` VOL TV ENT 0 DIS P LAY F RE E Z E AUDIO S URROUND PC CH 9 PC: Direct switch PC source. 10 4 5 6 7 ME NU 10 ENTER RETURN 11 24 FAV ORIT E CH A B S LE E P CC C D VIEW MODE AV MODE 25 26 MUTE: Mute the sound. (See page 25.) : Select the channel. CH / (See page 25.) 8 MENU: Display the menu screen.
Introduction to Connections Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription • HD compatible external equipment • For information on updating to HD programming, ask your cable/satellite service provider. Types of Connection Image quality differs depending on the terminal used.
Displaying an External Equipment Image Display To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. Example POWER INPUT < < CH 1 2 3 4 5 6 7 + ` VOL TV 9 0 DIS P LAY F RE E Z E MENU INPUT 8 / + VOL - ENT AUDIO FLASHBACK MUT E S URROUND US B PC CH ME NU INPUT POWER Input TV INPUT1 HDMI1 INPUT2 HDMI2 INPUT3 HDMI3 INPUT4 HDMI4 INPUT5 COMP1 INPUT6 COMP2 INPUT7 AV PC IN USB ENTER E X IT RETURN 1 Press INPUT.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 18 and 25.)For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting to External Equipment When using Component cable (INPUT 5,6): • Blu-ray disc player • DVD player • HD cable/satellite set-top box Audio cable Component video cable PR (Red) PB (Blue) Y (Green) AUDIO-L (White) AUDIO-R (Red) Y PB PR L- AUDIO -R Y PB PR L- AUDIO -R COMPONENT OUT Back panel horizontal inputs • To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment Connecting an Audio Amplifier When using coaxial cable: It is possible to output audio through the DIGITAL AUDIO terminal.PCM audio outputs from the terminal. Back panel vertical inputs Optical fiber cable VIDEO DIG ITAL AUDIO L- AUDIO -R OPTICAL DIGITAL AUDIO INPUT • Digital Audio output is not available when using an HDMI input.
Connecting to External Equipment Connecting a PC Refer to page 46 for a list of PC signals compatible with the TV. When using HDMI cable (INPUT 1, 2, 3 or 4): Side panel vertical inputs INPUT 1 HDMI-certified cable INPUT 2 USB INPUT 1 terminal (HDMI) INPUT 2 terminal (HDMI) HDMI OUT • The HDMI terminals only support digital signal. When using DVI-HDMI conversion cable (INPUT 1,2,3,4): Back panel vertical inputs Ø 3.
Watching TV Turning On/Off the Power Press POWER on the TV, or POWER on the remote control unit to turn the power on. • POWER indicator : Power on,nothing;Power off,red. < Press POWER on the TV, or POWER on the remote control unit again to turn the power off. < CH VOL • The TV enters standby and the image on the screen disappears. + POWER MENU INPUT INPUT 1 3 2 POWER POWER • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
Watching TV 3. Location setting • Press ▲ / ▼ to select “Home” or “Store” and press ► to the next step. 4. Initial Setup Welcome Location Please select your location: Home mode is destined for home user. Store mode is designed for retail store. Home Store 7. Start channel searching • Wait until the channel scan to complete. • If you press RETURN, the process will return to the previous step. • If you skip this step, the channel search can be performed in the TV Menu. (See page 34.
Direct Button Operation • An image from the selected source automatically displays. • Each time INPUT is pressed, the input source toggles. • If you press ▲/ ▼ to select the input source, press ENTER to confirm your selection.
Direct Button Operation FLASHBACK Press FLASHBACK to switch to the previously tuned channel or input. • Press FLASHBACK again to switch back to the currently tuned channel or input. SURROUND The surround function produces Surround effect from the speakers. Each time you press SURROUND, the mode changes between On and Off. • On: Makes it possible to enjoy natural, realistic surround sound. • Off: Outputs the normal sound. • You can have the same settings by choosing “Surround” on the menu items.
Direct Button Operation ■ Digital broadcasting audio mode The types of audio transmitted in a digital broadcast include SURROUND as well as MONO and STEREO. In addition, it is possible for multiple audio tracks to accompany a single video track. Press MTS/SAP to toggle between audio modes. Example: when receiving Digital broadcasting STEREO (Audio1) STEREO (Audio2) SURROUND (Audio3) s MTS only operates while in TV mode. In the Closed Caption system, there can be more than one caption service provided.
Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio.
On-Screen Display Menu Menu Items For TV Mode Video Menu ........................................................... 31 AV Mode ................................................................. 32 Color Temperature .................................................. 32 Warm ............................................................... 32 Standard ..........................................................32 Cool ................................................................. 32 User ......................
On-Screen Display Menu On-Screen Display Menu Operation Example Example 1 2 ▼ ▼ 1 Video Audio ▼ 2 TV ▼ AV Mode Video User Brightness 50 Contrast 50 Saturation 50 Hue 0 TV 10 Sharpness Setup Audio Setup Color Temperature ▼ ▼ 3 Video Enter Enter Enter Enter Parental On Ambient Light Sensor Video Select Select Return Return Video Exit Exit Brightness 50 Contrast 50 Saturation 50 Hue 0 Sharpness 10 3 Color Temperature 1 Press ◄ / ► to enter the desired ite
On-Screen Display Menu Menu Operation Button Using the remote control Use the following buttons on the remote control to operate the menu. Video Menu Adjusts the picture to your preference with the following picture settings.
On-Screen Display Menu HDMI Mode AV Mode Adjust the best picture appearance from selecting the preset value of Standard, Movie, Power Saver, User, or Dynamic. . Color Temperature For a better white balance, use color temperature correction. Warm: White with reddish tone Standard: Cool: White with bluish tone • User: White balance can be adjusted manually through the R/G/B Gain between a maximum of 255 and a minimum of 0 for each color temperature.
On-Screen Display Menu Surround Audio Menu Adjusts the sound quality to your preference with the following settings. Example Video Balance Audio 0 Bass 50 Treble TV Setup 50 Surround Off Equalizer Off Speaker Off Equalizer Parental Audio Enter Enter TV US B PC Return Select Exit Select the preset audio mode from Off, Rock, Pop, Live, Classic . Speaker ME NU Choose to turn on or off the TV internal speaker.
On-Screen Display Menu CH Skip TV Menu = Video Tuner Mode Audio Air = To prevent certain programs from being viewed by pressing CH / buttons on the remote control, the selected channel can be skipped. Example Auto CH Search CH Skip Audio Mode Stereo Audio Language English Favorite Channels = • The skipped channel may not be found by pressing CH / buttons but can be access by pressing number buttons directly.
On-Screen Display Menu Setup Menu • Set the Date and Time manually. • Timer: Set the timer to switch the TV on/ off automatically at a preset time. Example Sleep Timer Video Audio OSD Language English View Mode Normal Allows you to set a time when the TV automatically switches to standby. (See page 25.
On-Screen Display Menu Digital Closed Caption This allows you to configure the way you choose to view digital captioning. Select one of the digital service channels made available by the caption provider. There are six standard services. Service 1 is designated as the Primary Caption Service. This service contains the verbatim, or near-verbatim captions for the primary language being spoken in the accompanying program audio. Service 2 is designated as the Secondary Language Service.
On-Screen Display Menu Parental Menu Before entering the Parental Control sub-menu, user has to key in the password first. After entering the parental sub-menu, the user can modify the restricted table. While exiting the sub-menu, the parental control function is activated. Enter a 4-digit password with the number buttons on the remote control. • The default password is 0000.
On-Screen Display Menu Rating Enable Set the Enable Rating to On to activate the program rating system. U.S. TV Ratings If you are receiving channels through a set-top box or cable receiver box connected by HDMI, you cannot use the TV ratings lock. Your set-top box or cable receiver box must be connected through RF or AV connectors. Age rating Content rating NONE None TV-Y Appropriate for children of all ages with themes and elements suitable for children aged 2-6.
On-Screen Display Menu U.S. Movie Ratings This section describes how to control viewing of movies based on their Motion Picture Association of America (MPAA) rating. Movie rating G Description General audiences. All ages admitted. PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappropriate for children under 13. R NC-17 X Restricted.
On-Screen Display Menu Movie rating Description 14+ Over 14 years: Could contain themes where violence is one of the dominant elements of the storyline, but it must be integral to the development of plot or character. Language usage could be profane and nudity present within the context of the theme. 18+ Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while related to the development of plot, character or themes, are intended for adult viewing.
USB USB This TV is fitted with a USB connector that enables you to view photos ˈplay music and play video that stored on a USB storage device. • USB storage device only support FAT 32 file System and USB disk within 16GB size. Input TV INPUT1 HDMI1 INPUT2 HDMI2 INPUT3 HDMI3 INPUT4 HDMI4 INPUT5 COMP1 INPUT6 COMP2 INPUT7 AV PC IN USB 1. Press INPUT to select USB from the input list or press USB direct button to enter it. 2. To exit the USB menu, press INPUT to select other sources.
USB ϧ ϧ View Photos 1. In the photo thumbnail browser, press ϧ /ϰ / / to select a photo or a photo album. 2. Press ENTER to view a full screen image. The slide show begins. 3. When the slide show begins, use the color buttons on the remote control and follow the on-screen instructions to view photos. 4. Press MENU to display the sub-menu. You can select the following options to display the photos.
USB ϧ ϧ Play Video 1. In the file thumbnail browser, press / ϧ /ϰ/ to select a video file. 2. Press ENTER to play the video file. 3.. Press MENU to display the sub-menu and select the following options to operate. • Pause • Repeat • Show Info • AV Mode • View Mode • You can also use the short keys on the remote control to operate. • : Play/Pause. / • : Next/Previous track. • Color Keys: GREEN: Repeat, RED/YELLOW: Backward/Forward seek. DISPLAY: Info.
Appendix Troubleshooting Problem s No power s Unit cannot be operated. Possible Solution s Check if you pressed POWER on the remote control unit. (See page 23.) If the indicator on the TV is still red, press POWER on the TV. s Is the AC cord disconnected? (See page 10.) s Has the power been turned on? (See page 23.) s External influences such as lightning, static electricity, may cause improper operation.
Appendix Specifications Item LC-32D59U 32” Class (31 1/2” Diagonal) LCD screen size Resolution Receiving System VHF/UHF TV Function CATV Receiving Digital Terrestrial Channel Broadcast (8VSB) Digital cable*1 (64/256 QAM) Audio multiplex Audio out ANT/CABLE Rear Terminals Side Dimension (W / H / D) VHF 2-13ch, UHF 14-69ch 1-125ch (non-scrambled channel only) 2-69ch 1-135ch (non-scrambled channel only) BTSC System 10W + 10W 75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV) and Digital (AIR/ CABLE)
Appendix PC Compatibility Chart It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 22 to set PC input signals. PC Resolution 720 x 400 VGA SVGA 640 x 480 800 x 600 PC XGA VESA Standard 31.469 kHz 70.087 Hz — 31.469 kHz 59.940 Hz O 37.861 kHz 72.809 Hz O 37.500 kHz 75.000 Hz O 35.156 kHz 56.250 Hz O 37.879 kHz 60.317 Hz O 48.077 kHz 72.188 Hz O 46.875 kHz 75.000 Hz O 48.363 kHz 60.004 Hz O 56.476 kHz 70.069 Hz O 60.023 kHz 75.
Appendix RS232 Port Specifications PC control of the TV Command format • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. Eight ASCII codes + CR C1 C2 C3 C4 P1 P2 P3 Command 4-digits • This operation system should be used by a person who is accustomed to using computers. Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Appendix Information on the Software License for This Product ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Legal notices ■ FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
LC-32D59U LC-42D69U FRANÇAIS TÉLÉVISEUR À ÉCRAN À CRISTAUX LIQUIDES FRANÇAIS MANUEL DE L'UTILISATEUR IMPORTANT : Pour vous permettre de rapporter plus facilement la perte ou le vol de votre appareil, veuillez inscrire le numéro de modèle et le numéro de série du téléviseur dans l'espace prévu. Ces numéros sont situés à l'arrière du téléviseur.
INFORMATIONS IMPORTANTES ATTENTION : POUR PRÉVENIR TOUT CHOC ÉLECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. AVERTISSEMENT: La Commission Fédérale des Communications précise que tout changement ou modification de l’appareil non expressément approuvés par le fabricant risque d’annuler le droit de l’utilisateur à utiliser cet équipement.
CHER CLIENT SHARP Merci d'avoir acheté ce téléviseur Sharp à écran à cristaux liquides. Pour assurer la sécurité et de nombreuses années de fonctionnement sans problème de votre appareil, veuillez lire les consignes de sécurité avant d'utiliser cet appareil. CONSIGNES DE SÉCURITÉ IMPORTANTES L énergie électrique peut rendre de nombreux services, mais si elle n'est pas utilisée adéquatement elle peut causer des blessures et des dommages matériels.
CONSIGNES DE SÉCURITÉ IMPORTANTES 18) Dommages nécessitant une réparation—Débranchez l'appareil de la prise murale et confiez les réparations à un personnel de service qualifié dans le conditions suivantes : a) Lorsque le cordon d'alimentation ou la fiche est endommagé, b) Si du liquide a été renversé ou que des objets sont tombés dans l'appareil, c) Si l’appareil a été exposé à la pluie ou à l'eau, d) Si l'appareil ne fonctionne pas normalement après installation conforme aux instructions.
CONSIGNES DE SÉCURITÉ IMPORTANTES • Eau et humidité — N'utilisez pas cet appareil près d'une source d'eau, par exemple, près d'une baignoire, d'un lavabo, d'un évier, d'une laveuse, d'un sous-sol mouillé ou d'une piscine. • Support — Ne placez pas l’appareil sur un chariot, un support, un trépied, une fixation ou une table instable. Placer l'appareil sur une base instable peut le faire tomber, entraînant des blessures graves ou endommageant l'appareil.
CONSIGNES DE SÉCURITÉ IMPORTANTES Soins du châssis • Utilisez un chiffon doux (coton, flanelle, etc.) et frottez délicatement la surface du châssis. • L'utilisation d'un chiffon traité chimiquement (humide / chiffon sec de type feuille, etc.) peut déformer les éléments du châssis ou causer des fissures. • L'utilisation d'un chiffon dur ou en appliquant une forte pression peut rayer la surface du châssis. • Si le châssis est très sale, essuyez-le avec un chiffon doux (coton, flanelle, etc.
CONSIGNES DE SÉCURITÉ IMPORTANTES SÉCURITÉ DES ENFANTS L'endroit et la façon dont vous utilisez votre écran plat font une différence Félicitations pour votre achat! Tout en profi tant de votre nouveau produit, veuillez vous rappeler de ces conseils de sécuritéj: LE PROBLÈME s L'attrait du cinéma maison est en croissance constante et les écrans plats géants sont des achats populaires. Cependant, les écrans plats ne sont pas toujours installés sur les supports.
RÉFÉRENCE RAPIDE Accessoires fournis Assurez-vous que les accessoires suivants sont fournis avec le produit. Télécommande (gx1) Page 11 Pile de type AAA (gx2) Page 13 Cordon d’alimentation c.a. (gx1) Page 10 42” 32” Support (gx1) avec les vis Page 8 x4 Manuel de l’utilisateur (gx1) REMARQUE • Utilisez toujours le cordon d'alimentation fourni avec le téléviseur. • Les illustrations ci-dessus sont données à titre explicatif et peuvent varier légèrement par rapport aux accessoires réels.
RÉFÉRENCE RAPIDE Démontage de la colonne du support pour un montage mural CAUTION • Veuillez faire attention lorsque vous démontez le châssis, le support et la colonne pour monter le téléviseur au mur. • Démontez la colonne du support dans le sens indiqué. • Ne la démontez pas du téléviseur à moins d’utiliser un support de montage mural à la place. 1. Desserrer les 4 vis qui fixent la colonne du support en utilisant un tournevis cruciforme. Retirez le couvercle du support du téléviseur.
RÉFÉRENCE RAPIDE Conseils d'installation rapide 1 Connectez votre antenne à l'arrière du téléviseur. (Voir page 12) 2 Branchez la fiche du cordon d'alimentation dans une prise électrique. 3 Comment allumer le téléviseur pour la première fois. A) Appuyez sur le bouton POWER (ALIMENTATION) du téléviseur. B) Le témoin d'alimentation POWER (ALIMENTATION) situé à l'avantdu téléviseur s'éteint.
RÉFÉRENCE RAPIDE Utilisation de la télécommande Utilisez la télécommande en la pointant vers le capteur de la télécommande sur le téléviseur. Les objets placés entre la télécommande et le capteur de la télécommande peuvent en gêner le fonctionnement. Capteur de la télécommande 45º (4m) Horizontal only Témoin d’alimentation 30º (5m) Horizontal & Vertical 0º (8 m) ■ Précautions concernant la télécommande • N'exposez pas la télécommande à des chocs.
Préparation Antennes Pour bénéficier d'une image plus claire, utilisez une antenne extérieure. Ce qui suit est une brève explication des types de connexions qui sont utilisées pour un câble coaxial. Si votre antenne extérieure utilise un câble coaxial de 75 Ohms avec un connecteur de type F, branchez-le dans la prise d'antenne située à l'arrière du téléviseur. 1.
Préparation Installation des piles dans la télécommande Si la télécommande ne fonctionne pas correctement, remplacez les piles de la télécommande. 1 Ouvrez le couvercle du compartiment des piles. 3 Ouvrez le couvercle du compartiment des piles. 2 Insérez deux piles « AAA » (fournies avec l'appareil). • Placez les piles dans le compartiment des piles en suivant le sens correspondant aux indications ( + ) et ( - ).
Contenu INFORMATIONS IMPORTANTES .............................................................................. 1 MARQUES DE COMMERCE ...................................................................................... 2 CONSIGNES DE SÉCURITÉ IMPORTANTES ........................................................... 3 RÉFÉRENCE RAPIDE` ................................................................................................ 8 Accessoires fournis ........................................................
Noms des pièces TV (Avant) Témoin d'alimentation Capteur de la télécommande Capteur de lumière TV (Côté/Arrière) *2 *1 Boutons de chaîne (CH / ) CH HEAD PHONE VOL + INPUT 1 Boutons de volum (VOL+ / _) INPUT 2 *3 USB HEADPHONE (CASQUE) Borne INPUT 1 (ENTRÉE 1) (HDMI) Borne INPUT 2 (ENTRÉE 2) (HDMI) USB MENU INPUT POWER Bouton MENU AC IN (ALIMENTATION CA) +2 Bouton d'entrée Bouton d'alimentation RS-232C IOIOI Y PB PR L- AUDIO -R Y PB PR L- AUDIO -R VIDEO L- AUDIO -R DIGITAL AUD
Noms des pièces Télécommande POWER 16 INPUT 1 2 3 4 5 6 7 17 / 8 9 0 ENT DIS P LAY F RE E Z E 18 19 + VOL ` 20 21 22 23 TV AUDIO FLASHBACK MUT E S URROUND PC US B CH 1 2 3 4 5 6 7 ME NU 8 9 10 ENTER E X IT RETURN 11 24 FAV ORIT E CH 25 26 A B S LE E P CC C D VIEW MODE AV MODE 12 13 14 15 10 ▲/▼/◄/►, ENTER (ENTRER) : Pour sélectionner l'élément désiré à l'écran. (Veuillez consulter la page 31.) 11 RETURN (RETOUR): Pour retourner à l’écran de menu précédent.
Présentation des connexions Afficher des images en HD Un téléviseur HD sans source HD est juste un téléviseur ordinaire. Pour profiter d'images HD sur le téléviseur, vous devez employer une RTQITCOOCVKQP *& F WPG FGU OCPKÂTGU UWKXCPVGUa • Diffusion par antenne hertzienne de qualité HD • Abonnement au câble/satellite HD • Équipement externe compatible HD REMARQUE • Pour plus d'informations sur la mise à jour à la programmation HD, veuillez contacter votre fournisseur de services par câble/satellite.
Affichage de l'image provenant d'un périphérique externe Pour afficher les images d'une source externe, sélectionnez la source d'entrée en appuyant sur le bouton INPUT (ENTRÉE) de la télécommande ou du téléviseur. Exemple INPUT (ENTRÉE) ENTER (ENTRER) E X IT RETURN 1 Appuyez sur le bouton INPUT. • L'écran affiche la liste des canaux. 2 Appuyez sur les boutons / pour sélectionner la source d’entrée. • Vous pouvez également sélectionner la source d'entrée en appuyant sur le bouton INPUT (ENTRÉE).
Connexion à un équipement externe Vous pouvez connecter différents types d'appareils externes à votre téléviseur. Pour afficher l'image d'une source externe,sélectionnez la source d'entrée à l'aide du bouton INPUT (ENTRÉE) de la télécommande ou du téléviseur. (Veuillez consulter les pages 18 et 25.) Pour connecter le téléviseur à un équipement externe, utilisez des câblesdisponibles dans le commerce.
Connexion à un équipement externe #XGE WP E¸DNG %QORQUCPVG '064' a ● Lecteur de disque Blu-ray ● Décodeur de câble/satellite HD ● Lecteur DVD Câble audio Câble de composante vidéo PR (Rouge) PB (Bleu) Y (Vert) AUDIO-L (Blanc) AUDIO-R (Rouge) Y PB PR L- AUDIO -R Y PB PR L- AUDIO -R COMPONENT OUT (SORTIE COMPOSANTE) Panneau arrière Entrées horizontales REMARQUE ● Pour utiliser l’écran à la résolution 1080p, branchez votre appareil externe à l’aide d’un câble certifié HDMI ou des câbles d
Connexion à un équipement externe Connexion d'un amplificateur audio #XGE WP E¸DNG EQCZKCNa Il est possible d'émettre le signal audio sur les sorties DIGITAL AUDIO. Un signal audio PCM est émis sur ce connecteur. Panneau arrière Entrées verticales Câble coaxial VIDEO DIG ITAL AUDIO L- AUDIO -R OPTICAL DIGITAL AUDIO INPUT REMARQUE • La sortie audio numérique (Digital Audio) n'est pas disponible lors de l'utilisation d'une entrée HDMI.
Connexion à un équipement externe Brancher un ordinateur personnel Reportez-vous à la page 46 pour une liste des signaux PC compatibles avec le téléviseur. #XGE WP E¸DNG *&/+ '064' QW a Panneau latéral Entrées verticales INPUT 1 Câble certifié HDMI INPUT 2 USB INPUT 1 (ENTRÉE 1) borne (HDMI) INPUT 2 (ENTRÉE 2) borne (HDMI) HDMI OUT REMARQUE • Les bornes HDMI ne prennent en charge que des signaux numériques.
Regarder la télévision Mise sous tension / hors tension Appuyez sur le bouton POWER (ALIMENTATION) du téléviseur, ou sur le bouton POWER (ALIMENTATION) de la télécommande pour allumer l'appareil. • Témoin d’alimentation POWER (bleu) : Le téléviseur est allumé. < Appuyez à nouveau sur le bouton POWER (ALIMENTATION) du téléviseur, ou sur le bouton POWER (ALIMENTATION) de la télécommande pour éteindre l'appareil. < CH VOL • Le téléviseur passe en mode veille et l'image sur l'écran disparaît.
Regarder la télévision 3. Réglage emplacement 7. • Appuyez sur les boutons ▲/▼ pour sélectionner « Accueil » ou « Magasin » et appuyez sur le bouton ► pour passer à l'étape suivante. 4. Initial Setupinitiale Installation Welcome Emplacement S'il vous plaît sélectionnez votre emplacement: Mode home est destinée à l'utilisateur à domicile. Mode Store est conçu pour les magasins de détail. Démarrer la recherche des canaux • Attendez que le balayage des canaux soit terminé.
Contrôle direct par les boutons ⌃ POWER INPUT ENTER 1 2 3 4 5 6 7 8 9 / 0 DIS P LAY F RE E Z E RETURN FAV ORIT E CH A B S LE E P CC C D VIEW MODE AV MODE FLASHBACK MUT E + ` VOL TV ENT AUDIO E X IT S URROUND US B PC • Chaque fois que le bouton INPUT (ENTRÉE) est enfoncé, la source d'entrée bascule. • Si vous appuyez sur les boutons ▲/▼ pour sélectionner la source d'entrée, appuyez sur le bouton ENTER (Entrée) pour confirmer votre sélection.
Contrôle direct par les boutons CANAL PRÉCÉDENT Appuyez sur le bouton FLASHBACK (CANAL PRÉCÉDENT) pour passer audernier canal affiché ou à la dernière source d'entrée sélectionnée. • Appuyez de nouveau sur le bouton FLASHBACK (CANAL PRÉCÉDENT) pourrevenir au canal actuel ou à la source d'entrée actuelle. SURROUND Cette fonction produit un effet Surround à partir des haut-parleurs. Chaque fois que vous appuyez sur le bouton SURROUND (ENTOUREZ), le mode change entre On et Off.
Contrôle direct par les boutons ■ Mode de diffusion audio numérique Les types d'audio transmis dans une émission numérique comprennent les modes SURROUND ainsi que MONO et STÉRÉO. De plus, il est possible que plusieurs pistes audio accompagnent une seule piste vidéo. Appuyez sur le bouton MTS/SAP pour basculer entre les modes audio. Exemple : réception d'une émission numérique STÉRÉO (Audio1) STÉRÉO (Audio2) SURROUND (Audio3) REMARQUE • La fonction MTS ne fonctionne qu'en mode TV.
Contrôle direct par les boutons VIEW MODE (MODE D'AFFICHAGE) Vous pouvez sélectionner la taille de l'écran. 1 Appuyez sur le bouton VIEW MODE (MODE D'AFFICHAGE) • Le menu View Mode (Mode d'affichage) s'affiche. • Le menu présente les options d'affichage que vous pouvez sélectionner pour le type de signal vidéo reçu. 2 Appuyez sur le bouton VIEW MODE ou sur▲/▼ pendant que le menu View Mode (Mode d'affichage) est affiché afin de sélectionner l'élément désiré dans le menu.
Menu d'affichage à l'écran Éléments du menu Pour le mode TV Menu vidéo........................................................... 31 Mode AV ................................................................ 32 Température de couleur ......................................... 32 Chaud .......................................................... 32 Standard ...................................................... 32 Froid ............................................................ 32 Personnalisé..................
Menu d'affichage à l'écran Fonctionnement du menu d'affichage à l'écran Exemple Exemple 1 2 ▼ ▼ 1 Vidéo Audio ▼ 2 TV ▼ Install.
Menu d'affichage à l'écran Boutons de contrôle du menu Vidéo User Mode AV 50 Luminosité Utilisation de la télécommande Utilisez les boutons suivants sur la télécommande pour contrôler le menu. Audio TV Contraste 50 Saturation 50 Nuance 0 10 Netteté Install.
Menu d'affichage à l'écran Mode AV Permet d'ajuster l'apparence de l'image à partir de valeurs pré-réglées : Standard, Film, Economie d'énergie, Utilisateur ou Dynamic (Dynamique). Température de couleur Pour un meilleur équilibre des blancs, utilisez la correction de la température de couleur.
Menu d'affichage à l'écran ENTOUREZ Menu audio Permet de régler la qualité sonore selon vos préférences avec les paramètres suivants. Vidéo Equilibre Audio 0 Basse 50 Aigus TV Install. 50 ENTOUREZ Off Egalisateur Off Hauts-parleurs Off Egalisateur Parental Audio Enter Entrée TV US B PC Cette fonction produit un effet Surround à partir des haut-parleurs. On (Act) : Permet de profiter d'un son surround réaliste et naturel. Off (Des) : Reproduit le son normal.
Menu d'affichage à l'écran Menu TV CH Skip Pour empêcher certains canaux d'être visualisés en appuyant sur les boutons CH ⌃ / de la télécommande, le canal sélectionné peut être ignoré.
Menu d'affichage à l'écran • Réglez la date et l'heure manuellement. • Minuterie : Réglez la minuterie pour allumer/éteindre le téléviseur automatiquement à une heure prédéfinie. Menu Install Exemple Video Audio OSD Language English Mode d’affichage Normal Minuterie de veille Conf de l'heure TV Sous-titre Emplacement Install. Cette option vous permet de configurer l'heure à laquelle le téléviseur se met automatiquement en veille.
Menu d'affichage à l'écran Sous-titre Numérique Vous permet de choisir comment vous souhaitez visualiser les sous-titres numériques. Sélectionnez l'un des canaux numériques proposées par le fournisseur des sous-titres. Il existe six services standards. Le Service 1 est le Service de sous-titrage principal. Ce service contient des sous-titres in extenso ou presque dans la langue principale parlée dans l'audio d'accompagnement. Le Service 2 est le Service de langue secondaire.
Menu d'affichage à l'écran Menu Parental Avant d'entrer dans le sous-menu Contrôle parental, l'utilisateur doit saisir le mot de passe. Une fois entré dans le sous-menu de contrôle parental, l'utilisateur peut modifier le tableau de restriction. Une fois sorti du sous-menu, la fonction de contrôle parental est activée. Entrez un mot de passe de 4 chiffres à l'aide du clavier numérique de la télécommande. REMARQUE • Le mot de passe par défaut est 0000.
Menu d'affichage à l'écran Classement TV US Si vous recevez des canaux par un décodeur ou un décodeur de câble connecté par l'entrée HDMI, vous ne pouvez pas utiliser le blocage de classifications des programmes télévisés. Votre décodeur ou décodeur de câble doit être connecté par les connecteurs RF ou AV. Classification par âge Classification du contenu AUCUNE Aucune TV-Y Approprié pour les enfants sans limite d'âge avec des thèmes et des éléments qui conviennent à des enfants de 2 à 6 ans.
Menu d'affichage à l'écran Classement films US Cette section décrit comment contrôler l'affichage des films selon la classification MPAA. Classification du film G PG PG-13 R NC-17 X Description Public général. Tous âges admis. Surveillance parentale recommandée. Certaines scènes peuvent ne pas convenir aux enfants. La surveillance des parents est fortement recommandée. Certaines scènes peuvent être inappropriées pour des enfants de moins de 13 ans. Restreint.
Menu d'affichage à l'écran Classification du film Description 18+ Adultes: Destiné aux téléspectateurs de 18 ans et plus; pourrait contenir des scènes de violence, qui bien que liées au développement de l'intrigue, aux personnages et aux thèmes, sont destinées aux adultes. Présence possible de langage graphique et de représentations sexuelles et de nudité. Class. Canada fran. Classification du film Description E Programmation exemptée.
USB USB Format de fichier Ce téléviseur est équipé d'un connecteur USB qui vous permet d'afficher des photos, d'écouter de la musique et de lire des vidéos stockées sur unpériphérique de stockage USB. • Le périphérique de stockage USB ne prend en chargeque le système de fichiers FAT 32 et une clé USB de 16 Go au maximum. Type de compression DCT progressive BMP -- 1024x768 JPG, JPEG DCT séquentielle de base 3872x2952 Naviguer dans le dossier de fichiers 1. Appuyez sur le bouton USB.
64# 3FHBSEFS MFT QIPUPT Dans le navigateur des photos 3&."326& • miniatures, appuyez sur les boutons ▲ /▼ / ◄/► pour sélectionner une photo ou un album photo. Appuyez sur le bouton &/5&3 pour visualiser une image en plein écran. Le diaporama commence. Lorsque le diaporama commence, utilisez les boutons de couleur de la télécommande et suivez les instructions à l'écran pour afficher les photos.
64# 3FHBSEFS MFT QIPUPT Dans le navigateur des fichiers miniatures, appuyez sur les boutons ▲ /▼/◄/► pour sélectionner un fichier vidéo. Appuyez sur le bouton &/5&3 pour lire le fichier vidéo. Appuyez sur le bouton .&/6 pour afficher le sous-menu et sélectionnez les options suivantes pour contrôler la lecture. • • • • • 3&."326& • Vous pouvez également utiliser les raccourcis de la télécommande pour contrôler la lecture. • : Lecture/Pause. • : Piste suivante/précédente.
"QQFOEJDF &ÃRCPPCIG 2TQDNÂOG 5QNWVKQP RQUUKDNG o Appuyez sur le bouton 219'4 de la télécommande. (voir page 23) Si o Absence de tension. o Le téléviseur ne peut pas être contrôlé. o La télécommande ne fonctionne pas. o o le témoin du téléviseur reste allumé en rouge, appuyez sur le bouton 219'4 du téléviseur.
#RRGPFKEG 5RÃEKſECVKQPU NÃOGPV Taille de l'écran ACL Résolution Système de réception Fonction TV Canal de réception Côté Dimensions*2 (L / H / P) 1049088pixels (1366 x 768) 2073600pixels (1920 x 1080) Système de télévision standard américaine ATSC/NTSC VHF pour les canaux 2-13, UHF pour les canaux 14-69 Diffusion numérique terrestre (8VSB) Canaux 2-69 1câble numérique (64/256 QAM) Canaux 1-135 (canaux non brouillés seulement) Système BTSC 10W + 10W ANT/CABLE 1 connecteur de 75 non symétrique
#RRGPFKEG 6CDNGCW FG EQORCVKDKNKVÃ 2% Il est nécessaire de configurer le PC correctement afin d'afficher le signal XGA et WXGA. Consultez la page 22 afin de définir les signaux d'entrée PC. 2% 4ÃUQNWVKQP 720 x 400 VGA 640 x 480 SVGA 800 x 600 PC XGA 5VCPFCTF 8'5# 31,469 kHz 70,087 Hz — 31.469 kHz 70.087 Hz O 31.469 kHz 59.940 Hz O 37.861 kHz 72.809 Hz O 37.500 kHz 75.000 Hz O 35.156 kHz 56.250 Hz O 37.879 kHz 60.317 Hz O 48.077 kHz 72.188 Hz O 46.875 kHz 75.000 Hz O 48.
#RRGPFKEG 5RÃEKſECVKQPU FW RQTV 45 %QPVTÏNG FW VÃNÃXKUGWT RCT NG 2% o Connectez un câble RS-232C de type croisé (disponible (QTOCV FG NC EQOOCPFG Huit codes ASCII + CR dans le commerce) au connecteur Din/Sub-D RS-232C fourni. 3&."326& C1 C2 C3 Commande à 4 chiffres o Ce système d'exploitation doit être utilisé par une personne qui est habituée à utiliser des ordinateurs. %QPFKVKQPU FG EQOOWPKECVKQP C4 P1 P2 P3 Paramètre à 4 chiffre P4 Code de retour Commande de 4 chiffres: Commande.
#RRGPFKEG +PHQTOCVKQP UWT NC NKEGPEG FW NQIKEKGN FG EG RTQFWKV ■ %QORQUKVKQP FW NQIKEKGN Le logiciel inclus dans ce produit est composé de divers composants logiciels individuels dont les droits sont détenus par Sharp ou par des tiers. ■ .
#RRGPFKEG /GPVKQPU NÃICNGU ■ %(% 2CTVKG Cet appareil est conforme à la partie 15 des règlements de la CFC. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences nuisibles et (2) cet appareil doit être capable d’accepter toutes les interférences éventuelles, y compris les interférences pouvant provoquer un fonctionnement inattendu.
"QQFMFS QPVS EF M BJEF Pour connaître l'emplacement du centre de service autorisé Sharp le plus proche de chez vous, ou pour obtenir de la documentation, des accessoires, des fournitures ou un support technique, veuillez appeler le 1-800-BE-SHARP. ("3"/5*& -*.*5 & )#4#06+' .
LC-32D59U LC-42D69U TV DE CRISTAL LÍQUIDO ESPAÑOL IMPORTANTE: Para facilitar la realización de informes en caso de pérdida o robo, registre el modelo y el número de serie de la TV en el espacio proporcionado. Estos números están ubicados en la parte posterior de la TV. ESPAÑOL MANUAL DE FUNCIONAMIENTO Núm. de modelo: Núm. de serie: INFORMACIÓN IMPORTANTE ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA ELÉCTRICA, NO EXPONGA ESTE PRODUCTO A LA LLUVIA O HUMEDAD.
INFORMACIÓN IMPORTANTE PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA COINCIDIR LA CLAVIJA MÁS ANCHA DEL ENCHUFE CON LA RANURA MÁS ANCHA E INSERTE POR COMPLETO. ADVERTENCIA: Las regulaciones de la FCC señalan que cualquier cambio o modificación no autorizado en este equipo que no hayan sido expresamente aprobados por el fabricante podría anular la autorización del usuario para utilizar este equipo.
ESTIMADO CLIENTE DE SHARP Gracias por adquirir la TV de cristal líquido Sharp. Para garantizar la seguridad y muchos años de funcionamiento sin problemas del producto, lea detenidamente la sección INTRUCCIONES IMPORTANTES DE SEGURIDAD antes de utilizar el producto. INSTRUCCIONES IMPORTANTES DE SEGURIDAD La electricidad se usa para realizar muchas funciones útiles, pero también puede causar lesiones en personas y daños en la propiedad si se utiliza incorrectamente.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD 17) Entrada de objetos y líquidos — No meta nunca objetos de ninguna clase en este producto a través de las aberturas porque pueden tocar puntos de alto voltaje peligrosos o cortocircuitar partes que podrían causar un incendio o una descarga eléctrica. No derrame nunca líquidos de ningún tipo sobre el producto.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD s El enchufe de alimentación de corriente o el acoplador del aparato son dispositivos de desconexión; el dispositivo de desconexión deberá estar siempre listo para usar. s Cuando se utilice el INTERRUPTOR PRINCIPAL DE CORRIENTE omnipolar como el dispositivo de desconexión, se deberá describir la ubicación del producto y el funcionamiento del interruptor, y el interruptor deberá estar siempre listo para usar.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD • Para evitar un incendio o una descarga eléctrica, no exponga este producto a goteo ni a las salpicaduras. Tampoco deberán ponerse encima del producto objetos llenos de líquidos como, por ejemplo, floreros. • No introduzca ningún tipo de objeto en el producto. Introducir objetos por las aberturas de ventilación o por otras aberturaspuede ser causa de incendio o de descarga eléctrica. Tome especiales precauciones al utilizar el producto con niños en las proximidades.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD SEGURIDAD DE LOS NIÑOS Cómo y dónde utilizar la pantalla de panel plano hace realmente la diferencia ¡Felicitaciones por su compra! Mientras disfruta de su nuevo producto, tenga en cuenta estas recomendaciones de seguridad: EL PROBLEMA s La experiencia de entretenimiento de cine en casa es una tendencia cada vez mayor y las pantallas de panel plano cada vez más grandes son adquisiciones populares.
REFERENCIA RÁPIDA Accesorios suministrados Asegúrese de que los siguientes accesorios estén incluidos con el producto. Control remoto (hx1) Página 11 Pila de tamaño “AA” (hx2) Página 13 Cable de alimentación de CA (hx1) Página 10 42” 32” Base (hx1) con tornillos Página 8 x4 Manual de funcionamiento (hx1) • Utilice siempre el cable de alimentación de CA suministrado con la TV.
REFERENCIA RÁPIDA Extracción del cuello de la base para el montaje en pared • Tenga cuidado al desarmar el armario, base y columna para el montaje en pared. • Extraiga el cuello de la base en la dirección correcta. • No extraiga el cuello de la base de la TV a menos de desee utilizar un soporte de pared opcional para su instalación. 1. Afloje los 4 tornillos que aseguran el cuello de la base utilizando un destornillador de cabeza en forma de cruz. Extraiga la cubierta de la base de la TV.
REFERENCIA RÁPIDA Sugerencias para la instalación rápida 1 Coloque la antena en la parte posterior de la TV. (Consulte la página 12). 2 Conecte el enchufe de CA de la TV en un tomacorriente de CA. 3 Encendido de la TV por primera vez. A) Presione POWER (ENCENDIDO/ APAGADO) en la TV. B) El indicador POWER (ENCENDIDO/ APAGADO) ubicado en la parte frontal de la TV se apaga.
REFERENCIA RÁPIDA Utilización del control remoto Utilice el control remoto apuntando hacia el sensor del control remoto ubicado en la TV. Los objetos que se encuentren entre el control remoto y su sensor podrían no permitir un funcionamiento correcto. Sensor del control remoto 45º (4m) Sólo horizontal Indicador de ENCENDIDO/APAGADO 30º (5m) Horizontal y vertical 0º (8 m) ■ Precauciones relacionadas con el control remoto • No exponga el control remoto a impactos.
Preparación Antenas Para disfrutar de una imagen más nítida, utilice una antena exterior. A continuación, se realiza una explicación breve sobre los tipos de conexiones utilizados para un cable coaxial. Si la antena exterior utiliza un cable coaxial de 75 ohmios con un conector tipo F, conéctelo en el terminal de antena ubicado en la parte posterior de la TV. 1.
Preparación Instalación de las pilas en el control remoto Si el control remoto no puede realizar las funciones de la TV, reemplace las pilas del control remoto. 1 Abra la tapa de las pilas. 3 Cierre la tapa de las pilas. 2 Inserte las pilas de tamaño “AAA” (incluidas con el producto). • Coloque las pilas según las indicaciones de polaridad ( + ) y ( . ) del compartimiento de las pilas. La utilización incorrecta de las pilas podría derivar en fugas químicas o explosiones.
Contenido INFORMACIÓN IMPORTANTE ................................................................................... 1 MARCAS COMERCIALES ........................................................................................... 2 INSTRUCCIONES IMPORTANTES DE SEGURIDAD ................................................. 3 REFERENCIA RÁPIDA ................................................................................................. 8 Accesorios suministrados ..............................................
Nombres de las partes TV (parte frontal) Indicador de ENCENDIDO/APAGADO Sensor del control remoto Sensor de luz TV (parte lateral/posterior) *2 *1 Botones de canal CH (CH / ) HEAD PHONE HEAD PHONE VOL + INPUT 1 Botones de volumen INPUT 2 (VOL+ / _) *3 USB MENU INPUT POWER Botón MENÚ INPUT 1 terminal (HDMI) INPUT 2 terminal (HDMI) USB AC IN *1 Botón ENTRADA Botón ENCENDIDO/ APAGADO RS-232C IOIOI Y PB PR L- AUDIO -R Y PB PR L- AUDIO -R VIDEO L- AUDIO -R DIGITAL AUDIO *1:
Nombres de las partes Control remoto 9 POWER 16 INPUT 1 2 3 4 5 6 7 8 9 / 17 0 DIS P LAY F RE E Z E 18 19 + ` 20 21 22 23 VOL TV ENT AUDIO FLASHBACK MUT E S URROUND PC US B CH 1 2 3 4 5 6 7 ME NU 8 9 10 ENTER E X IT RETURN 11 24 FAV ORIT E CH 25 26 A B S LE E P CC C D VIEW MODE AV MODE 12 13 14 15 PC: Permite cambiar directamente a la fuente PC. 10 ▲/▼/◄/► , ENTER (ACEPTAR): Permite seleccionar un elemento deseado en la pantalla. (Consulte la página 31).
Introducción a las conexiones Experiencia con imágenes en alta definición Una TV de alta definición sin una fuente de alta definición es simplemente una TV normal.
Visualización de la imagen de un equipo externo Para visualizar imágenes de fuentes externas, seleccion e la fuente de entrada presionando el botón INPUT (ENTRADA) en el control remoto o en la TV. Ejemplo INPUT (ENTRADA) ENTER (ACEPTAR) E X IT RETURN 1 Presione el botón INPUT (ENTRADA). • Aparecerá la pantalla CH List (Lista de canales). 2 Presione el botón / para seleccionar la fuente de entrada. • También puede seleccionar la fuente de entrada presionando el botón INPUT (ENTRADA).
Conexión de los equipos externos Puede conectar varios tipos de equipos externos en la TV.Para visualizar imágenes de fuentes externas, seleccione la fuente de entrada utilizando el botón entrada en el control remoto o el botón INPUT (ENTRADA) en la TV. (Consulte las páginas 18 y 25).Para la conexión de la TV con equipos externos, utilice cables disponibles en comercios. PRECAUCIÓN ● Para proteger los equipos, apague siempre la TV antes de conectar cualquier equipo externo.
Conexión de los equipos externos Al utilizar el cable de video componente (INPUT (ENTRADA) 5, 6): ● Reproductor de Blu-ray Disc ● Reproductor de DVD ● Sintonizador de TV por cable/satelital de alta definición Cable de audio Cable de video componente PR (Rojo) PB (Azul) Y (verde) AUDIO-L (blanco) AUDIO-R (rojo) Y PB PR L- AUDIO -R Y PB PR L- AUDIO -R COMPONENT SALIDA DE VIDEO OUT COMPONENTE Entradas horizontales del panel posterior NOTA ● Para disfrutar de una visualización 1080p, conecte el equ
Conexión de los equipos externos Conexión de un amplificador de audio Al utilizar un cable coaxial: Es posible transmitir audio a través del terminal DIGITAL AUDIO (AUDIO DIGITAL). Se emite audio PCM desde el terminal. Entradas verticales del panel posterior Cable coaxial VIDEO L- AUDIO -R DIGITAL AUDIO ÓPTICA ENTRADA DE AUDIO DIGITAL NOTA • La salida de audio digital no está disponible al util izar la entrada HDMI.
Conexión de los equipos externos Conexión de una PC Consulte la página 46 para obtener una lista de las señales de PC compatibles con la TV. Al utilizar el cable HDMI (INPUT (ENTRADA) 1, 2, 3 o 4): Entradas verticales del panel lateral ENTRADA 1 Cable HDMI certificado ENTRADA 2 USB Terminal INPUT 1 (ENTRADA 1) (HDMI) Terminal INPUT 2 (ENTRADA 2) (HDMI) SALIDA HDMI NOTA • Los terminales HDMI sólo admiten señales digitales.
Visualización de la TV Encendido/apagado Presione POWER (ENCENDIDO/APAGADO) en la TV o POWER (ENCENDIDO/APAGADO) en el control remoto para encender la TV. < • Indicador ENCENDIDO/APAGADO (Azul): La TV está encendida. < CH VOL Presione POWER (ENCENDIDO/APAGADO) en la TV o POWER (ENCENDIDO/APAGADO) en el control remoto nuevamente para apagar la TV. + - MENU • La TV ingresa en el modo de espera y desaparece la imagen en la pantalla.
Visualización de la TV 3. Configuración de ubicación • Presione el botón ▲/▼ para seleccionar “Inicio” o “Almacenar” y presione el botón ► para avanzar al próximo paso. Initial Setup inicial Configuración BúsquedaWelcome de canales Primero conecte el cable y/o antena. Búsqueda Saltar búsqueda ¿Iniciar la búsqueda de canales ahora ? Si salta este paso, podrá realizarla después en el Menú. 0% 4.
Utilización directa de los botones POWER INPUT ENTER 1 2 4 5 7 / + ` TV E X IT RETURN 6 8 9 0 ENT DIS P LAY F RE E Z E VOL 3 AUDIO FAV ORIT E CH A B S LE E P CC C D VIEW MODE AV MODE FLASHBACK • Consulte la página 19-22 para la conexión de los equipos externos. MUT E S URROUND US B PC • Si presiona el botón ▲/▼ para seleccionar la fuente de entrada, presione el botón INTRO para confirmar la selección.
Utilización directa de los botones CANAL ANTERIOR Presione el Presione el botón FLASHBACK (CANAL ANTERIOR) para cambiar al canal o entrada sintonizada previamente. • Presione nuevamente el botón FLASHBACK (CANAL ANTERIOR) paracambiar al canal o entrada sintonizado actualmente. SONIDO ENVOLVENTE La función de sonido envolvente otorga un efecto de sonido envolvente desde los altavoces. Cada vez que presione el botón SURROUND (SONIDO ENVOLVENTE), este modo cambiará entre Activado y Desactivado.
Utilización directa de los botones Puede cambiar el MTS como se muestra a continuación para ajustarlo a la señal de transmisión de televisión. Presione el botón AUDIO para cambiar entre los modos de audio. Ejemplos: al recibir MTS y SAP Modo PRINCIPAL + SAP: Modo MONO: MONO ■ Modo de audio de transmisión digital Los tipos de audio transmitidos en una transmisión digital incluyen ENVOLVENTE, MONO y ESTÉREO. Además, es posible que varias pistas de audio acompañen a una sola pista de video.
Utilización directa de los botones MODO DE VISUALIZACIÓN Puede seleccionar el tamaño de la pantalla. 1 2 Presione el botón VIEW MODE (MODO DE VISUALIZACIÓN). • Aparecerá el menú Modo de vista. • Este menú muestra las opciones de Modo de vista que se pueden seleccionar para el tipo de señal de video que se está recibiendo actualmente. Presione el botón VIEW MODE (MODO DE VISTA) o ▲/ ▼ cuando aparezca el menú Modo de vista para seleccionar el elemento deseado en el menú.
Menú de visualización en pantalla Elementos del menú Para el modo TV Menú Video ...........................................................31 Modo AV .................................................................32 Temperatura de color ..............................................32 Cálida ............................................................. 32 Estándar ......................................................... 32 Fría .................................................................
Menú de visualización en pantalla Funcionamiento del menú de visualización en pantalla Ejemplo Ejemplo 1 2 ▼ ▼ 1 Vídeo Audio ▼ 2 TV ▼ Configur Vídeo Usuario Modo AV Brillo 50 Contraste 50 Saturación 50 0 Matiz 0 Nitidez 10 Matiz Nitidez 10 Audio TV Temperatura de color Configur Vídeo avanzado ▼ 3 ▼ De los Padres Video Usuario Modo AV Enter Intro Enter 50 Contraste 50 50 3 Temperatura de color Vídeo avanzado Sensor de luz ambiental Video Brillo Saturación Intro
Menú de visualización en pantalla Botones para la navegación por el menú Utilización del control remoto Utilice los siguientes botones en el control remoto para navegar por el menú. Menú Video Permite ajustar la imagen a su preferencia a través de las siguientes configuraciones de imagen.
Menú de visualización en pantalla HDMI Mode (Modo HDMI) Modo AV Ajuste la mejor apariencia de imagen seleccionando el valor predeterminado Estándar, Película, Ahorro de energía, Usuario o Deportes. Temperatura de color Para un mejor balance de blancos, utilice la corrección de la temperatura de color.
Menú de visualización en pantalla Sonido surround Menú Audio Permite ajustar la calidad del sonido a su preferencia a través de las siguientes configuraciones. Ejemplo Vídeo Balance Audio 0 Graves 50 Agudos TV Configur 50 Surround Des Ecualizador Des Altavoces Des La función de sonido envolvente otorga un efecto de sonido envolvente desde los altavoces. Act: Permite disfrutar de un sonido envolvente natural y realista. Des: Se emite el sonido normal.
Menú de visualización en pantalla CH Skip Menú TV Para evitar la visualización de determinados canales al presionar los botones CH!⌃ / en el control remoto, se puede omitir el canal seleccionado.
Menú de visualización en pantalla • Ajuste manualmente la fecha y ahora. • Temporizador: Permite establecer el temporizador para encender/apagar la TV a una hora predeterminada. Configuración Ejemplo Video Audio OSD Language Español View Mode Normal Tiempo suspensión Permite establecer un tiempo luego del que la TV ingresará automáticamente en el modo de espera. (Consulte la página 25). Time Setup TV Caption Location Setup Home Version Info Reset Descanso auto.
Menú de visualización en pantalla Subtítulos Digitales Permite configurar la forma en la que desea visualizar los subtítulos ocultos digitales. Seleccione uno de los canales de servicio digital proporcionados por el proveedor de los subtítulos ocultos. Existen seis servicios estándares. Servicio 1 está designado como el servicio de subtítulos ocultos principal.
Menú de visualización en pantalla Menú Paterno Antes de ingresar en el submenú Control paterno, el usuario deberá ingresar primero la contraseña. Luego de ingresar en este submenú, el usuario puede modificar la tabla de restricciones. Al salir de este submenú, se activará la función de control paterno. Ingrese una contraseña de 4 dígitos con los botones numéricos del control remoto. • La contraseña predeterminada es 0000.
Menú de visualización en pantalla Clasif. TV en EEUU (Clasificación de TV de Estados Unidos) Si recibe canales a través de un sintonizador o receptor de TV por cable conectado a través de HDMI, no podrá utilizar el bloqueo de clasificación de la TV. El sintonizador o el receptor de TV por cable deberá estar conectado a través de conexiones RF o AV.
Menú de visualización en pantalla Clas. películas EEUU (Clasificación de películas de Estados Unidos) Esta sección describe cómo controlar la visualización de las películas basándose en la clasificación de la Asociación Cinematográfica de EE. UU. (MPAA, por sus siglas en inglés). Clasificación de la película G PG PG-13 R NC-17 X Descripción Todo público. Se permiten todas las edades. Se sugiere orientación paterna. Algunos materiales podrían no ser adecuados para niños. Advertencia para los padres.
Menú de visualización en pantalla Clasificación de la película Descripción 14+ Mayores de 14 años: podría contener temas donde la violencia es el elemento dominante de la trama, pero deberá formar parte del desarrollo del argumento o personaje. El lenguaje utilizado podría ser vulgar y podrían existir escenas de desnudez dentro del contexto de la trama.
USB USB{0><}100{>{0><}100{> Esta TV incluye un conector USB que permite visualizar imágenes, reproducir música y videos almacenados en un dispositivo de almacenamiento USB. El dispositivo de almacenamiento USB sólo admite el sistema de archivos FAT 32 y discos USB de hasta 16 GB.
USB Visualización de imágenes 1. ! En el explorador de vistas en miniatura NOTA • de imágenes, presione los botones ▲ /▼ / ◄/► para seleccionar una imagen o álbum de imágenes. 2. ! Presione ENTER (ACEPTAR) para visualizar la imagen en pantalla completa. Se iniciará la presentación. 3. ! Cuando comience la presentación, utilice los botones de colores del control remoto y siga las instrucciones en pantalla para visualizar las imágenes. 4. ! Presione el botón MENU (MENÚ) para visualizar el submenú.
64# 7JTVBMJ[BDJÊO EF JN¸HFOFT /05" En el explorador de vistas en miniatura de • archivos, presione los botones ▲ /▼ / ◄/► para seleccionar un archivo de video. Presione el botón &/5&3 "$&15"3 para reproducir el archivo de video. Presione el botón .&/6 .&/± para visualizar el submenú y seleccionar las siguientes opciones. • • • • • Pausa Repetir Mostrar información Modo AV Modo de visualización También puede utilizar los botones de acceso rápido del control remoto.
"QÀOEJDF 4GUQNWEKÎP FG RTQDNGOCU 2TQDNGOC 2QUKDNG UQNWEKÎP o Verifique si presionó el botón 219'4 '0%'0&+&1 #2#)#&1 o La TV no enciende o o en el control remoto. (Consulte la página 23). Si el indicador de la TV sigue de color rojo, presione el botón 219'4 '0%'0&+&1 #2#)#&1 en la TV. ¿El cable de alimentación de CA está desenchufado? (Consulte la página 10). ¿Se encendió la TV? (Consulte la página 23).
#RÃPFKEG 'URGEKſECEKQPGU 'NGOGPVQ .% & 7 .% & 7 Tamaño de la pantalla LCD 32” (31 1/2” en diagonal) Resolución 1.049.088 píxeles (1.366 x 768) 2.073.
#RÃPFKEG 6CDNC FG EQORCVKDKNKFCF EQP 2% Es necesario ajustar correctamente el PC para visualizar señal XGA y WXGA. Para el ajuste de las señales de entrada al PC, consulte la página 22. 2% 4GUQNWEKÎP 720 x 400 VGA 640 x 480 SVGA 800 x 600 PC XGA 31.469 kHz 70.087 Hz — 31.469 kHz 59.940 Hz O 37.861 kHz 72.809 Hz O 37.500 kHz 75.000 Hz O 35.156 kHz 56.250 Hz O 37.879 kHz 60.317 Hz O 48.077 kHz 72.188 Hz O 46.875 kHz 75.000 Hz O 48.363 kHz 60.004 Hz O 56.476 kHz 70.
#RÃPFKEG 'URGEKſECEKQPGU FGN RWGTVQ 45 (QTOCVQ FGN EQOCPFQ %QPVTQN FG NC 68 EQP NC 2% o Conecte un cable RS-232C de tipo cruzado Ocho códigos ASCII + CR (disponible en comercios) al Din/D-Sub RS-232C suministrado para efectuar las conexiones. /05" C1 C2 C3 Comando de 4 dígitos C4 P1 P2 P3 P4 Parámetro de 4 dígitos Código de devolución o Sólo aquellas personas acostumbradas a utilizar computadoras deberán emplear este sistema de operación.
#RÃPFKEG +PHQTOCEKÎP UQDTG NC NKEGPEKC FG UQHVYCTG RCTC GUVG RTQFWEVQ ■ %QORQUKEKÎP FGN UQHVYCTG El software incluido en este producto está compuesto por varios componentes de software cuyos derechos de propiedad intelectual individuales pertenecen a SHARP o a terceros.
Apéndice Avisos legales ■ Apartado 15 de la FCC Este dispositivo cumple con el Apartado 15 de las Normas FCC. Su funcionamiento está sujeto a las dos condiciones siguientes: (1) Este dispositivo no deberá causar interferencias perjudiciales y (2) este dispositivo deberá aceptar cualquier interferencia que reciba, incluidas interferencias que puedan causar un funcionamiento no deseado.
$POUBDUP DPO FM TFSWJDJP UÀDOJDP Para ubicar el servicio técnico autorizado más cercano de Sharp, o para obtener literatura acerca del producto, información acerca de los accesorios, suministros o asistencia al cliente por favor comuníquese al 1-800-BE-SHARP. ("3"/5¤" -*.*5"%" )#4#06 # .+/+6# 2#4# '.
Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) LC-42D69U 20 31/64 (520) 3 25/64 (86) 5 (127) 40 23/32 (1034) 40 3/4 (1035) 7 7/8 (200) 5 11/64 (131) 15 3 /4 (400) 15 7 /16 (392) 20 39/64 (523.26) 25 29/32 (658) 27 49/64 (705) 36 5/8 (930.
Dimensional Drawings Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) LC-32D59U 16 35/64 (420) 3 25/64 (86) 3 7 /16 (87) 31 35/64 (801) 31 37/64 (802) 7 7/8 (200) 4 49/64 (121) 7 7/8 (200) 12 27/32 (326) 15 29/64 (392.26) 20 3/4 (527) 22 39/64 (574) 27 15/32 (697.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in China Imprimé au Chine Impreso en China 50652T421S00R(A) HK