LC-52D64U FRANÇAIS LC-46D64U ENGLISH LC-42D64U LC-42D64U LC-46D64U LC-52D64U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ESPAÑOL OPERATION MANUAL MODE D'EMPLOI SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 MANUAL DE OPERACIÓN SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-D194WJZZ 07P07-MX-NM IMPORTANT : Please read this operation manual before star
Dimensional drawings Unit: inch (mm) LC-52D64U 48 45/64 (1237) 18 5/8 (473) 25 21/32 (651.6) 30 31/64 (774) 15 3/4 (400) 21 21/32 (550) 4 57/64 (124) 3 3/4 (95) 15 3/4 (400) 5 25/64 (137) 2 29/64 (62) 32 59/64 (836) 45 9/16 (1157.0) 12 13/16 (325) LC52_46_42D64U_E_Hyo.
ENGLISH LC-42D64U LC-46D64U LC-52D64U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Menu items that are not selectable are grayed out. • The examples used throughout this manual are based on the LC-42D64U model. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided.
IMPORTANT INFORMATION CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) Page 8 “AAA” size battery (g2) Page 8 AC cord (g1) Page 7 Cable clamp (g1) Cable tie (g1) Page 7 Stand unit (g1) Page 6 Operation manual (g1) NOTE • Always use the AC cord supplied with the TV. • AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult to the following.
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water. The AQUOS television is designed for AC use only and should be used with supplied AC cord.
QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries (supplied with the product). 3 Close the battery cover. • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Contents IMPORTANT INFORMATION ................................. 1 Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 IMPORTANT SAFETY INSTRUCTIONS ................. 3 Supplied accessories ............................................. 6 QUICK REFERENCE ............................................... 6 Attaching the stand............................................. 6 Contents ..................................................
Part names TV (Front) Remote control sensor OPC sensor* OPC indicator** SLEEP indicator** POWER indicator** NOTE *OPC: Optical Picture Control (See page 26.) **See page 16 for TV status indicator.
Part names Remote control unit 1 2 3 16 17 4 18 1 TV POWER: Switch the TV power on or enters standby. (See page 16.) 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operate the external equipment. 5 0 – 9: Set the channel. (See page 18.) 6 • (DOT): (See pages 18 and 52.) 7 INPUT: Select a TV input source.
Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding the remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit under direct sunlight.
Preparation You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 30 and 31.) CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.
Preparation Connecting a VCR, game console or camcorder A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the INPUT 1, 2 and 3 terminals. When using S-VIDEO cable. VCR/Game console/ Camcorder S-VIDEO cable (commercially available) AUDIO cable (commercially available) When using composite cable. VCR/Game console/ Camcorder AV cable (commercially available) NOTE • The S-VIDEO terminal takes priority over the video terminals.
Preparation Connecting HDMI equipment You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment. HDMI cable (commercially available) HDMI equipment NOTE • When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 6. • To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment using an HDMI cable and set the equipment to 1080p output.
Watching TV Simple operations for watching a TV program Turning on the power Press POWER on the TV, or TV POWER on the remote control unit. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) NOTE • The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the EZ Setup will not be invoked. See page 23 for performing EZ Setup from the Setup menu.
Watching TV Initial setup When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page 8.) 2. Connect the antenna cable to the TV. (See page 12.) 3. Plug in the AC cord to the AC outlet. (See page 7.) Channel search Channel auto search makes the TV look for all channels viewable in the set area.
Watching TV Simple button operations for changing channels You can change channels in several ways. Method 1 Using CH r/s on the remote control unit or on the TV. Method 2 1 Press FLASHBACK to switch to the previously tuned channel. 2 Press FLASHBACK again to switch back to the currently tuned channel. NOTE • FLASHBACK will not work if no channel has been changed after the TV is turned on. Method 3 Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL.
Watching TV Simple button operations for changing volume/sound ■ Using MUTE on the remote control unit Mutes the current sound output. ■ Changing the volume You can change the volume on the TV or on the remote control unit. Press MUTE. • M will be displayed on the screen for 30 minutes, and the sound is silenced. 20 Mute NOTE • Within 30 minutes of pressing MUTE, mute can be canceled by using one of the methods below. — Mute will be canceled if you press VOLk/l or MUTE.
Watching TV Setting MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.
Basic adjustment settings Menu operation buttons On-Screen Display ■ Using the remote control Use the following buttons on the remote control to operate the menu. Example Option AQUOS LINK Setup Audio Only Digital Noise Reduction Input Select [Off] [VIDEO] Output select [Fixed] Color System [Auto] Caption Setup MENU: Press to open or close the menu screen. a/b/c/d: Press to select a desired item on the screen or adjust a selected item.
Basic adjustment settings Menu items for TV/INPUT 1/2/3 Picture Menu items for HDMI/PC-IN Picture OPC .............................................................................. Page 26 Backlight ..................................................................... Page 26 Contrast ...................................................................... Page 26 Brightness .................................................................. Page 26 Color ....................................................
Basic adjustment settings EZ Setup You can run EZ Setup again, even after setting up the preset channels. Channel Setup If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Antenna setting Language setting Select from among 3 languages: English, French and Spanish. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “EZ Setup”, and then press ENTER.
Basic adjustment settings Channel memory setting Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the “Antenna Setup DIGITAL” screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “CH Setup”, and then press ENTER.
Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Using FAVORITE CH on the remote control unit 1 2 3 4 Select the channel you want to register as a favorite channel. Press FAVORITE. Press a/b to select “Register”, and then press ENTER. Press a/b/c/d to select the position in the category, and then press ENTER to register.
Basic adjustment settings Picture adjustments Selected item Adjusts the picture to your preference with the following picture settings. 1 Press MENU to display the MENU screen, and then press c/d to select “Picture”. 2 Press a/b to select a specific adjustment item. 3 4 Press c/d to adjust the item to the desired level. Press MENU to exit.
Basic adjustment settings Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. Color Temperature For a better white balance, use color temperature correction. 1 Press MENU to display the MENU screen, and then press c/d to select “Picture”. Selected item 2 Press a/b to select “Advanced”, and then press ENTER. 3 Press a/b to select a specific adjustment item, and then press ENTER. High Mid-High Middle Mid-Low Low • You can select “C.M.S.
Basic adjustment settings Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Selected item Sound adjustment You can adjust the sound quality to your preference with the following settings. Description On Detects, analyzes, converts film source Off Normal viewing mode NOTE • “Film Mode” does not function when you set the “AV Mode” to “Game”.
Basic adjustment settings Surround Surround function allows you to enjoy realistic “live” sound. Power Control Power control setting allows you to save energy. No signal off When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes. 1 Press MENU to display the MENU screen, and then press c/d to select “Audio”. 2 Press a/b to select “Surround”, and then press ENTER. 1 Press MENU to display the MENU screen, and then press c/d to select “Power Control”.
Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV. Input Select If the image does not come in clearly from the external equipment connected to INPUT 1 or 3, you may need to change the input signal type setting on the “Input Select” menu. 1 Press MENU to display the MENU screen, and then press c/d to select “Option”. 2 Press a/b to select “Input Select”, and then press ENTER.
Using external equipment Displaying an image from HDMI equipment 1 To watch an HDMI or PC-IN equipment image, select “INPUT4”, “INPUT5” or “INPUT 6” from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV. INPUT SOURCE TV Input Skip This setting allows you to skip the HDMI or PC-IN Input on the Input Selection operation. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “Input Skip”, and then press ENTER.
Useful adjustment settings Auto Sync. adjustment (for Analog PC input mode only) For automatically adjusting the PC image. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “Auto Sync.”, and then press ENTER. 3 Press c/d to select “Yes”, and then press ENTER. Fine Sync. adjustment Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync.
Useful adjustment settings Image position Reset For adjusting a picture's horizontal and vertical position. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “Position”, and then press ENTER. 3 If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”.
Useful adjustment settings Input Label Sleep Timer Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Allows you to set a time when the TV automatically switches to standby. 1 Press SLEEP. • The remaining time displays when the sleep timer has been set. Sleep Timer: Remaining 1 Press INPUT to select the desired input source. 2 Press MENU to display the MENU screen, and then press c/d to select “Setup”.
Useful adjustment settings View Mode for 4:3 Programs View Mode for HD Programs The following modes are available for HD programs. Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at the top and bottom of the screen. Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on the screen. 1 Press VIEW MODE. • The View Mode menu displays.
Useful adjustment settings View Mode for PC input mode You can select the screen size. NOTE • Connect the PC before making adjustments. (See page 15.) • Selectable screen size may vary with input signal type. 1 Press VIEW MODE. • The View Mode menu displays. Example View Mode Normal Zoom Stretch Dot by Dot 2 Press VIEW MODE or a/b while the View Mode menu is displayed to select a desired item on the menu.
Useful adjustment settings Advanced Option settings Perform the following steps to set the Option menu items on this page. 1 Press MENU to display the MENU screen, and then press c/d to select “Option”. 2 Press a/b to select a specific adjustment item, and then press ENTER. 3 Press a/b (or c/d) to select the desired setting, and then press ENTER. 4 Press MENU to exit. • Skip this step for “Audio Only”.
Useful adjustment settings AV MODE Selected item AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. 1 Press AV MODE. 2 Press AV MODE again before the mode displayed on the screen disappears. • Current AV MODE displays. • The mode changes as shown below.
Useful adjustment settings Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Useful adjustment settings Selectable items available for “Font Style”. Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. 1 Press MENU to display the MENU screen, and then press c/d to select “Option”. 2 Press a/b to select “Caption Setup”, and then press ENTER. 3 Press a/b to select a specific adjustment item.
Useful adjustment settings Secret number setting for parental control 5 New Secret No. Secret No. Clear Allows you to use a secret number to protect certain settings from being accidentally changed. IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 41 to 47): 1 Secret No. is registered. 2 V-Chip/V-Chip (DTV Only) settings have been made. 3 “Status” is set to “On”. Setting a secret number 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”.
Useful adjustment settings Changing the secret number Allows you to change your current secret number. Clearing the secret number Allows you to clear your secret number. 1 Repeat steps 1 and 2 in Setting a secret number. • The secret number setting menu displays. 2 1 Input the 4-digit secret number by using 0–9. 3 Press a/b to select “Secret No.”, and then press ENTER. Input the 4-digit secret number by using 0–9. 4 Press a/b to select “Secret No. Clear”, and then press ENTER.
Useful adjustment settings Parental control (setting V-CHIP level) V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV.
Useful adjustment settings Voluntary movie rating system (MPAA) 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “Parental CTRL”, and then press ENTER. TV Parental Guidelines (TV Guidelines) 1 Repeat steps 1 to 4 in Voluntary movie rating system (MPAA). 2 Press a/b to select “TV Guidelines”, and then press ENTER. 3 Press a/b to adjust the item to your desired position. “ ” indicates the item is blocked.
Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Useful adjustment settings Canadian English ratings Canadian French ratings 1 Press MENU to display the MENU screen, and then press c/d to select “Setup”. 2 Press a/b to select “Parental CTRL”, and then press ENTER. 1 Repeat steps 1 to 4 in Canadian English ratings. 2 Press a/b to select “Can. French Ratings”, and then press ENTER. 3 Press a/b to adjust the item to your desired position. “ ” indicates the item is blocked.
Useful adjustment settings How to temporarily release the V-CHIP BLOCK When the V-CHIP BLOCK is working and censors a broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays. 1 Press ENTER while the V-CHIP is working, and then the secret number setting menu displays. 2 Input the 4-digit secret number by using 0– 9. At this time V-CHIP BLOCK temporarily releases. Digital Setup This setting allows you to optimize the settings of Digital broadcasting.
Useful adjustment settings Software Update 6 This function allows software updates by inserting a USB memory device with the update file into the USB terminal on the TV. Regarding how to obtain the software update file, please call 1-800-BE-SHARP. During the data checking, “Checking” blinks. Now checking the data in the USB memory device. Checking • The current version of the TV software and the version of the update file on the USB memory device are displayed.
Useful adjustment settings 7 Press ENTER to start updating. • The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. 9 After the screen shown below is displayed, press ENTER. System software was successfully updated. Remove the USB memory device. OK The picture will temporarily go dark until the Software Update display appears. Wait several minutes and do not unplug the AC cord.
Other viewing options Freezing images Allows you to capture and freeze a moving image that you are watching. 1 2 Presetting remote control function You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. Press FREEZE. • A moving image is captured. Press FREEZE again to cancel the function. NOTE • When this function is not available, “No displaying still image available.” will display.
Other viewing options Manufacturer codes VCR BRAND REMOTE CONTROL CODE NUMBER DVD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND REMOTE CONTROL CODE NUMBER NOTE • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER 51 LC52_46_42D64U.
Other viewing options ■ Cable control buttons When the FUNCTION is set to CBL/SAT, the cable converter connected to the TV can be operated using 1 to 4. 1 1 2 2 3 3 4 4 SOURCE POWER Turns the cable converter power on and off. 0–9 Press a button (or buttons) that corresponds to the channel that you wish to watch. FLASHBACK * Press to switch between the current channel and the channel you were watching immediately before. CH r/s Press CHr or CHs to tune in to a higher or lower channel.
Other viewing options ■ VCR control buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. 8 • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 can be used to control the VCR. 2 4 1 7 3 5 6 2 3 4 5 1 6 7 8 CH r/s Press to select the channel of the TV tuner on the VCR. SOURCE POWER Turns the power of the VCR on and off. F Sets pauses and still pictures.
Other viewing options Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blue-ray Disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
Other viewing options Auto Power On Selecting Recorder If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. 1 Press MENU to display the MENU screen, and then press c/d to select “Option”. 2 Press a/b to select “AQUOS LINK Setup”, and then press ENTER. 3 Press a/b to select “Auto Power On”, and then press ENTER.
Other viewing options Selecting Media Type for CEC-compatible Recorder You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items.
Other viewing options One Touch Playback Listening with the AQUOS AUDIO Speaker System AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control. Press d to start playing back a title. • The last played program is played back. You can use following buttons during broadcast viewing. Buttons 1 Press OPTION to display the AQUOS LINK MENU screen. 2 Press a/b to select “By AQUOS AUDIO SP”, and then press ENTER.
Appendix Removing the stand Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 2 Hex key Unfasten the four screws used to secure the stand in place.
Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed TV POWER on the remote control unit. (See page 16.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 16.) • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation.
Appendix RS-232C port specifications PC control of the TV • When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections.
Appendix Response code format Problem response (communication error or incorrect command) Normal response O E K R R Return code (0DH) Return code (0DH) Command table • Commands not indicated here are not guaranteed to operate.
Appendix Specifications Item LCD panel Model: LC-46D64U Model: LC-52D64U 42o Advanced Super View & BLACK TFT LCD (Screen size 421/64o measured diagonally) 46o Advanced Super View & BLACK TFT LCD (Screen size 4563/64o measured diagonally) 52o Advanced Super View & BLACK TFT LCD (Screen size 521/32o measured diagonally) 6,220,800 dots (1920g 1080 g 3 dots) Number of dots TV-standard (CCIR) TV Function Model: LC-42D64U Receiving Channel American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UH
CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 Press MENU to display the MENU screen, and then press c/d to select “Setup”. Press a/b to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number input screen displays. Setup Secret No. 3 Option a a a a Press and hold both CHr and VOLk on the TV simultaneously until the message appears on the screen. The secret number is .
Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
66 LC52_46_42D64U.
Dimensional drawings Unit: inch (mm) LC-42D64U 39 17/32 (1004) 15 7/64 (409) 25 7/16 (646) 20 47/64 (526.2) 21 21/32 (550) 4 59/64 (125) 15 3/4 (400) 3 3/4 (95) 7 7/8 (200) 15 3/4 (400) 2 29/64 (62) 27 7/8 (708) 36 3/4 (933.2) 12 13/16 (325) LC-46D64U 15 3/4 (400) 17 9/64 (435) 22 43/64 (575.6) 27 31/64 (698) 40 19/64 (1023.4) 21 21/32 (550) 4 59/64 (125) 3 3/4 (95) 15 3/4 (400) 6 57/64 (175) 2 29/64 (62) 29 59/64 (760) 43 23/64 (1101) 12 13/16 (325) LC-42D64U_070705B.
Dimensional drawings Unit: inch (mm) LC-52D64U 48 45/64 (1237) 18 5/8 (473) 25 21/32 (651.6) 30 31/64 (774) 15 3/4 (400) 21 21/32 (550) 4 57/64 (124) 3 3/4 (95) 15 3/4 (400) 5 25/64 (137) 2 29/64 (62) 32 59/64 (836) 45 9/16 (1157.0) 12 13/16 (325) LC52_46_42D64U_E_Hyo.
LC-52D64U FRANÇAIS LC-46D64U ENGLISH LC-42D64U LC-42D64U LC-46D64U LC-52D64U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ESPAÑOL OPERATION MANUAL MODE D'EMPLOI SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 MANUAL DE OPERACIÓN SHARP CORPORATION Printed in Mexico Imprimé au Mexique Impreso en México TINS-D194WJZZ 07P07-MX-NM IMPORTANT : Please read this operation manual before star
