SHARP :: :i_¸¸ AQUOS LC-70LE640U LC-60LE640U LC-52LE640U U U U LC-70C LCLC-52C LIQUID CRYSTALTELEVISION Ti_L_:VISEL TELEVIS DE MODE MANI 1.41 rl-Ilil TM ......................... _ DIVX+ H D SmartCentra ...._°o..,.,°,, IMPORTANT : Please read this operation IMPORTANT : Veuillez lire ce mode d'emploi manual before starting avant de commencer IMPORTANTE : Lea este manual de operaci6n antes de comenzar operating the equipment. b. utiliser I'appareil. a operar el equipo.
LC-70 LCLC- U U U LiQUiD CRYSTAL LC-70C6400U LC-60C6400U LC-52C6400U TELEViSiON ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear and right side of the TV. IMPORTANT WARNING: Model No.: Serial No.: INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
iMPORTANT iNFORMATiON CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LiQUiD CRYSTAL TELEViSiON, MODEL LC-70LE640U/LC-60LE640U/LC-52LE640U/ LC-70C6400U/LC-60C6400U/LC-52C6400U This device complies with Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp of trouble-free operation of your product, using this product. iMPORTANT Liquid please Crystal Television. read the important To ensure safety and many years Safety instructions carefully before SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS Outdoor Antenna Grounding - If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. • Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Contents iMPORTANT iNFORMATiON ............................. 1-2 DEAR SHARP CUSTOMER .................................... 3 iMPORTANT SAFETY iNSTRUCTiONS ............. 3=5 Supplied Accessories ............................................. QUICK REFERENCE Attaching the Stand ............................................ QUICK INSTALLATION TIPS ............................... Experiencing HD Images ..................................... Using the Remote Control Unit ...........................
Supplied Accessories Make sure the following Remote control unit (x 1) Page 8 accessories are provided with the product. "AAA" size battery (x 2) Page 9 Stand unit (x 1) Page 7 Operation manual (x 1) Connection guide (x 1) ,., .......... J Always use the AC cord supplied with the TV. The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE 0 iB,...... o Before attaching (or detaching) the stand, unplug the AC cord.
QUICK REFERENCE 1 Attach your antenna (See page 9.) 2 Connect outlet. to the back of the television. the AC plug for the television LC-70LE640U LC-70C6400U into the AC LC-60/52LE640U LC-60/52C6400U An HDTV without an HD source is just an ordinary TV.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Part Names l G_ OPC sensor * Remote control sensor Center Icon illumination (See page 32.) * OPC: Optical Picture Control (See page 26.) *2 r _ I I RS-232C terminal OWER _ button MENU __-R-AUDIO-L button PC IN terminal VIDEO _-_'_.,_ _ I:IT INPUT terminals t button _ terminals R-AUDIO-L _' P_t(cr4 P_(CB> _-'a -Y / -- COMPONENT terminals _ AUDIO OUT terminal /-) USB 1 terminal HDMI 1 terminal ARC: Audio Return Channel i,̧...................
Part Names 1 1 POWER: Switch the TV power on or enter standby. (See page 17.) 2 TV, STB, DVDoVOR, AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 47 to 48 for details.) 18 * To enter the code registration mode, you need to press an appropriate button (STB, DVD.VCR or AUDIO) and DISPLAY at the same time. 19 2_ _ 4 OPTION SLEEP 9 AUDIO FREEZE .... 2O 21 3 External equipment external equipment.
introduction to Connections For connecting the TV to external equipment, use commercially available cables. . The illustrations of the terminals are for explanation purposes and may vary slightlyfrom the actual products. m Connecting to video equipment or PC Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images. Quality HD _ HDMI-certified cable _ I=I_IRr!! 0 3.
Connecting to E×ternal Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.) For connecting the TV to external equipment, use commercially available cables. To protect equipment, always turn off the TV before connecting any external equipment. Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting When to using Externa( Equipment Component cable (COMPONENT}: _:_\ Audio _le Y (Green) PB(Blue) Component video cable To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output. See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.
Connectingto ExternalEquipment When connecting an AV amplifier for surround system HD Cable/Satelliteset-top box HDMI-certified cable "1 1 Optical fiber cable *2 Letting the TV output the audio to an AV amplifier: "1 When you connect ARC-compatible equipment, use the HDMI 1 terminal. *2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable. Ifthe image is not in sync with the audio, check the settings of the connected surround system.
Connectingto E×ternalEquipment Refer topage54foralistofPCsignals compatible withtheTV. WhenusingHDMI cable (HDMI 1 2, 3 or 4): HDMI-certified cable 1 Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". (See page 54.) • The HDMI terminals only support digital signal.
Watching TV mPOWER When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insertthe batteriesintothe remotecontrolunit. (Seepage9.) 2. Connect the antenna cable to the TV. (Seepage 9.) 3. Plug in the AC cord to the AC outlet. (See page 8.
Watching TV : 3 Press A/V to select the time zone where you are using the TV, and then press ENTER. Example 4 Antenna & Cable/STB Select the type of connection you will use to watch T_. 6 Press 4/_ to select "Antenna & Cable" or "Settop box", and then press ENTER. o The time zone differs depending on the selected country. o The factory preset value is the time zone for the capital of the selected country.
Watching TV OH Search (Channel search) Channel auto search makes the TV look for all channels viewable in the set area. 8 When "Air" is selected in Antenna setting: Press 4/_ to select "Start", and then press ENTER. Completed 9 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press ENTER. Examples of the settings confirmation screen When one or more channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out.
Direct Button Operation [] _ OREC EC3 CC3 CZ3 CZ3 OPTION SLEEP AUDIO You can change the volume by pressing VOL+/the TV or on the remote control unit. = To increasethe volume, pressVOL +. = To decrease the volume, press VOL-. FREEZE AAL on Central Smart Audio status Speaker CC _ AVMODE VlEWMODEFLASHBACK CZl To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1 Press INPUT. 2 • The INPUT list screen displays.
Direct Button Operation Press FLASHBACK to switch to the previously tuned channel or previous input mode. o PressFLASHBACK again to switch back to the currently tuned channel. FLASHBACK AUTO: Optimizes the image quality automatically based on the room brightness and image signal. STANDARD: For a highly defined image in a normal lighting. MOVIE: For a movie. GAME: Lowers image brightness for easier viewing. PC: For PC.
Direct Button Operation Digital broadcasting audio The types of audio transmitted in a SURROUND as well as MONO and is possible for multiple audio tracks video track. mode digital broadcast include STEREO. In addition, it to accompany a single Press ENTER to toggle between audio modes. Example: when receiving Digital 1 Press CC. • This will present the Closed Caption information display. 2 Press CC while the Closed Caption information is still on the screen.
DirectButtonOperation CC AVMODE VIEWMODEFLASHBACK You can select the screen size. 1 Press VIEW MODE. o The View Mode menu displays. . The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. Smart Central AAL • You can sequentially select a View Mode that has its own aspect ratio. o You can have the same settings by choosing "View Mode" on the menu items.
On=Screen Display Menu LCFONT embedded Example Exarnple ® ® ® 1 Press MENU 2 (i_ Press (9 to display _l/l_ the MENU screen. to select the desired Press A/V to select a specific and then press ENTER. menu. adjustment item, o Additional related adjustment items may be displayed. Press A/Y to select the desired item. (_ Adjust the item while referring display. to the guide • Operations vary depending on the function or item.
On=Screen Display Menu o When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. o Some menu items may not be displayed depending on the selected input source. AQUOS LINK Setup ........................ Page 50 Input Terminal Setting ......... Pages 30-31,54 Audio Setup .......................... Page 30 PC input ................................ Page 54 Audio Select .......................... Page 54 Input Skip .......................
On=Screen Display Menu The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes. Adjusts the picture to your preference with the following picture settings.
On=Screen Display Menu For a better white balance, use color temperature correction. High: White with bluish tone Middle: Mid-High: Mid-Low: Low: White with reddish tone White balance can be adjusted between a maximum of 4-30 and a minimum of -30 for each color temperature. R Gain (LO/HI}: -30 through +30 G Gain (LO/HI}: -30 through +30 B Gain (LO/HI}: -30 through +30 o For resetting all adjustment items to the factory preset values, press A/T to select "Reset", and then press ENTER.
On=Screen Display Menu You can adjust the sound quality to your preference with the following settings. Example Different sound sources sometimes do not have the same loudness level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels. High: Reducing the loudness gaps among different sound sources strongly. Middle: Smart Central AAL Low: Reducing the loudness gaps among different sound sources slightly.
On=Screen Display Menu _ 0 Power ," O| control O setting Example I allows ,, This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Standard: Optimizes power reduction based upon video content. When set to "Standard", ,,_/,, appears on the screen. Advanced: Optimizes power reduction based upon video content and engages OPC. When set to "Advanced", "_" appears on the screen. Off: This function does not work.
On=Screen Display Menu i_ii_i_i_ii_!_!_!_lllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll:_!i_ii_ii ¸illIlill__llil_ .......... Allows you to capture and freeze a moving image that you are watching. Example You can select Freeze by pressing FREEZE on the remote control unit. See page 20 for details of Freeze function. Allows you to change the audio when multiple audio is available for the program you are watching.
On=Screen Display Menu To watch an HDMI or PC IN equipment image, select "HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the INPUT list using INPUT on the remote control unit or on the TV. Auto View: Enable: To use View Mode based on signal recognition, includingan HDMIsignal. Disable: No function. o Refer to your external equipment operation manual for the signal type. When connecting a DVI-HDMI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.
On=Screen Display Menu This function locks the operation and the remote control. buttons on the TV Off: No adjustment. RC Control Lock: All buttons on the remote control are locked. Button Control Lock: All buttons on the TV, except POWER, are locked. When "RC Control Lock" or "Button Control Lock" is selected, a confirmation screen appears. Yes: Locks the operation buttons. No: No adjustment.
On=Screen Display Menu Antenna & Cable/STB: Select the type of connection you will use to watch TV. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. ® If "Cable" is selected for Antenna setting, scrambled channels are removed after the Channel search has been completed, Completed: The settings confirmation screen is displayed.
On=Screen Display Menu This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. If you have alreadyset the Secret No., input the 4-digit secret number here. Select "Register" and then press ENTER.
On=Screen DisplayMenu TV Parental Guidelines V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. = The U.S.
On=Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) o The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On=Screen Display Menu 2 Press A/T to select "Software Update", and then press ENTER. = Ifyou havealreadyset the Secret No., go to step 3. Example Example AAL Smart Central 1 Press MENU to display the MENU screen, and then press _1/_ to select "Information". 2 Press A/V to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4t/_) to select the desired setting, and then press ENTER. 4 Press MENU to exit. 3 Input the 4-digit secret number by using 0-9.
On=Screen Display Menu II Updating the Software via the Network 1 Press A/T on the Manual Update screen to select "Network Update", and then press ENTER. o The TV connects to the network and checks for updates. o To cancel, press ENTER. • Do not unplug the AC cord while the software being updated. is 4 When the software is successfully updated, a screen is displayed indicating that the update process is completed. A screen indicating that the update is completed is displayed.
On=Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 4 During the data checking, "Checking" blinks. 5 To update the TV software with the update file, select "Yes", and then press ENTER. !! Example The current version of the TV software and the version of the update file on the USB memory device are displayed. Example Do not remove the USB memory device or unplug the AC cord while the software is being updated.
Enjoying Photo/Music/Video You can connect the TV to a USB memory viewing listening pictures, to music, device, and watching Playback USB hard drive or home network (DLNA) server to enjoy videos. o Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. o It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains many files or folders.
Enjoying Photo/Music/Video Playback AAL USB device USB Memory, USB card reader (Mass Storage class), USB hard drive File system Photo file format FAT/FAT32/NTFS Music file format MP3 (.mp3) Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 96k, 112k, 128k, 160k, 192k, 224k, 256k, 320kbps Sampling frequency: 32k, 44.1 k, 48kHz Smart Central (USB hard drive only) JPEG (jpg) (DOF2.
Enjoying Photo/Music/Video Playback The photo selected on the thumbnail selection screen is displayed. Buttons for individual display 41/_" Example operation RETURN Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. A (red} B (green} Rotate the photo by 90 degrees to the left, Rotate the photo by 90 degrees to the right, o Rotating photos only applies to the temporarily selected item and this setting is not saved.
Enjoying Photo/Music/Video Playback Smart Central AAL Example A B C D AQUOS On the menu to be displayed in USB mode, use A/T to select an item and make settings to your preferences. Example This screen image is for the USB mode. It may be slightly different in the Home network (DLNA) mode. Buttons for music A/V/_t/II_ Select a desired item. ENTER When selecting a folder icon: Enter this directory. When selecting a music file: Play music. Return to the previous process.
Enjoying Photo/Music/Video Playback Buttons for playing mode ipt! Example A Y I_ This screen image is for the USB mode. It may be slightly different in the Home network (DLNA) mode. OPTION SLEEP AUDIO 41 FREEZE Smart Central AAL C::3 C::3 C::3 C::3 ENTER RETURN CO Buttons A AVM00E VIEWMODEFLASHBACK for file selecting B C operations A/T/_I/_ Select a desired item, ENTER When selecting a folder icon: Enter this directory.
Enjoying Photo/Music/Video Playback m Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing MENU after you press A/T to select "USB Operation Panel"/"Home Network (DLNA) Operation Panel" from "System Options" > "View Option". Example Buttons for using the Home Network )anel operation (DLNA} Starts playback.
Enjoying Photo/Music/Video Playback This is the function to confirm your registration code. You need to recister the code at http://www.divx.com. Smart Central AAL A O B C CD O D CD 1 Press MENU to display the menu screen. 2 Press _/1_ to select "Initial Setup", and then press ENTER. 3 Press A/T to select "DivX® Setup", and then press ENTER. m DivX ®VOD registration You can find your registration code on this menu. You need to register the TV at http://wv_v.divx.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. POWER To operate the connected equipment, press STB, DVD+VOR or AUDIO to select your device. (STB (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows. + When you operate VCR, BD or DVD, press INPUT to select the terminal connected to your device.
Other Viewing Options Manufacturer codes VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE iNSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNiN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHiLiPS QUASAR REALiSTiC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA REMOTE CONTROL NUMBER O9 13 04 12 04 O9 10, 13, 04 04 04 09, 16, 09 04, 05, 12 O4 O2 O9 04, 18, O5 04, 05 04, 05, 04 01,02 11,12 01,02, 07, 08, 04, 05, O9 O9 10 O9 CODE REMOTE STB BRAND ANViSION CABLE STA
Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactivelyoperate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
UsingAQUOS LiNK This function can be set for each input terminal. On: The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of the connected AQUOS LINK-compatible recorder. Off: This function does not work. Example AAL Central Smart This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required.
Using AQUOS LiNK Smart Central AAL This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing OPEC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items. o Make sure that the antenna cable is connected. o Check that there is sufficient available space on the recording media (HDD, DVD, etc.).
Using AQUOS LiNK You can manually turn on/off the power of the connected AQUOS LINK-compatible equipment. Each time you press ENTER, the connected equipment switches on or off. You can use the device operation panel to control playback operations. Press A/T/4/_ to select the desired operation. o This function works only when AQUOS LINK-compatible equipment with the Device Operation Panel function is connected.
Using a PC -- m You can select the screen size. 1 2 Smart Central AAL 0 0 MODE. o The View Mode menu displays. The menu lists the View Mode options seleetable for the type of video signal currently being received, Press VIEW MODE or &/T while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. Connect the PC before making adjustments. (See page 16.
Using a PC Example AAL Smart Central This function audio. sets the terminal to output the computer The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. 1 Press MENU to display the MENU screen, and then press 4/1_ to select "System Options". 2 Press A/V to select "Input Terminal Setting", and then press ENTER. 3 Press A/T to select "PC input" or "Audio Select", and then press ENTER.
Using a PC • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for the connections. [] Communication conditions for RS=2320 Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Using a PC [] Command table • Commands not indicated here are not guaranteedto operate. CONTROL ITEM POWERONOOMMANDSETIING INPUT SELECTION AV MODE TL_-'GGLE_ P 0i ! ! Off The Power On command rejected. 1 i 2 i i i i i Or,[RS 2320] On [IP] The Power On command accepted. i The Power On command accepted. When the power is in standby mode, commands also go to waiting status and so power consumption is just about the same as usual.
Using the Internet By connecting your TV to a broadband system, you can access the Intemet from the TV. • Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. (See page 59.) ,, You can enjoy a variety of streaming content and Intemet applications. (See page 64.) ,, To connect your TV to the Intemet, you must have a broadband Intemet connection.
Using the Intemet 5 to select "Push button", and then press 6 o To configure the setting via PC, select "PIN code". Follow the on-screen instructions and the operation manual of the access point to configure the settings. Select "Next" to complete the settings. 7 o The connection process starts and the WPS button on the access point can be pressed. Press the WPS button on the access point. Example AAL Press A/V ENTER. Central Smart o Pressing the WPS button displays a confirmation screen.
Using the Internet AAL Smart Central This function can be used to display information and allow you to receive over the network. Press AAL to display the TV+Web screen. o If "1_:_:_"or "[]_" is displayed after you connect to the Internet, check your TV's network settings and connection. When the AQUOS ADVANTAGE LIVE screen appears, now you are connected to the Intemet. o You can also display the AQUOS ADVANTAGE LIVE screen by pressing FAY APP on the remote control unit.
Using the Intemet When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. o You can enter up to 128 characters for text. o Some special characters or diacritics may not be available depending on where you enter the text. -- The text you enter is displayed as you type it in. Press 4/_ to select the type of characters entered: alphabet, number or sign. (The selectable types depend on the input source.
Using the Internet AAL Smart Central ENTER, A/Y/4/_ o Press A/Y/4/I_ to select a link that you want to jump, and then press ENTER. About links • Web pages on the Internet often include "links" that allow you to jump to other web pages (or sites). "Links" can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them. Selected items (such as links of text input fields) are enclosed in a yellow frame.
Usingthe Interact You can use the toolbar to control the browser and to specify settings. Smart Central AAL Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. 1 Display the page that you want to bookmark. A B C 2 Press D on the remote control unit to display the toolbar. 3 Press 4t/1_ to select "_" press ENTER. D AQUOS 1 Press D on the remote control unit to display the toolbar.
Using the Interact You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. AAL A Central Smart B C D CO 1 Press D to display the toolbar. 2 Press 4/1_ to select "_" press ENTER. in the toolbar, and then Security: Save Setting: If you select this option, a message is displayed when you move from a protected page to an unprotected page.
Using the Internet Example By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, movies, music, photos, and games. AAL Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 37) or by visiting http://www.sharpusa.com/products/support/ to check for a download of the newest software version. Smart Central Smart Central AAL 1 Press MENU to display the menu screen.
Usingthe Internet When you access the Internet application for the first time, the following appears. o This messageis availableonly in English. DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties.
Appendix • Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. LC=70LE640U/LC=60LE640U/LC=70C6400U/LC=60C6400U 1 2 Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. J m LC=52LE640U/LC=52C6400U Before attaching/detaching the stand Before performing work spread cushioning over the base area to lay the TV on.
Appendix This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP}. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. = Installing the TV requires special skirl that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Appendix Problem o No power o Check if you pressed POWER on the remote control unit. _, Page 17 o Is the AC cord disconnected? ,,_Page 8 o Has the power been turned on? • Page 17 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. o Remote control unit does not operate.
Appendix Problem Possible Solution o No picture o Is connection to other components correct? =_ Pages 12 to 16 and 49 o Is the correct input selected? =_ Pages 12 and 20 o Is "On" selected in "Audio Only"? • Page 29 If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. - Check the resolution setting on the PC.
Appendix CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 Select an item from the list below to display the secret number input screen. (For operating the on-screen display menu, see page 24.) • "Color system" (_ "Input Terminal Setting" _ System Options menu). "EZ Setup" or "Reset" (_ Initial Setup menu). "CH Setup" (_ "Broadcasting Setup" _ Initial Setup menu). "Parental CTRL" (_ "Individual Setup" _ Initial Setup menu).
Specifications Model: LC-70LE640U/ LC-70C6400U item Model: LC-60LE640U/ LC-60C6400U LCD Size 70" Class (69 _//' Diagonal) panel Resolution 2,073,600 pixels (1,920 x 1,080) TV-standard (CCIR) TV Function Receiving Channel VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled Digital Terrestrial Broadcast (8VSB) 2-69ch Audio multi >lex Audio out 52' Class (52 _/s/' Diagonal) American TV Standard ATSC/NTSC System VHF/UHF Digital cable *_ (64/256 QAM) 1-135ch (non-scrambled channel only)
Specifications This TV has received the following certifications. - Wi-Fi CERTIFIED TM (certification program from the Wi-Fi Alliance ®) ® - Wi-Fi Protected Setup TM (certification program from the Wi-Fi Alliance ) FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
information on the Software License for This Product Software composition The software included in this product is comprised of various software components whose individualcopyrights are held by SHARP or by third parties.
information on the Software License for This Product libfreetype Copyright © 2006, 2007, 2008, 2009, 2010 by David Turner, Robert Wilhelm, and Werner Lemberg. cURL Copyright © 1996-2010, Daniel Stenberg, (daniel@haxx.se) libxml2 Copyright © 1998-2003 Daniel Veillard. All Rights Reserved. Lua Copyright © 1994-2008 Lua.org, PUC-Rio Lua-xmlreader Copyright © 2008 A.S. Bradbury Lua-slncrypto Copyright © 2005 Malete Partner, Berlin, partner@malete.org libzzip Copyright © Guido Draheim guidod@gmx.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
SH R| LiMiTED Consumer WARRANTY Electronics Congratulations Products on your purchase! Sharp Electronics of Canada Ltd.
Dimensional Drawings . ,m LC-70LE640U/LC-70C6400U Unit: inch (mm) Unite: pouce (mm) Unidad: pulgada (mm) 1/64 (51)'2 3v2/80/ I 5 23/64 (136) k 21 7/64 (536) 15 S/ J (400) Ij__ j 5 25/6 (137) AN=52AG4 LC-60LE640U/LC-60C6400U io 1 7/64 (27.
Dimensional Drawings LC-52LE640U/LC-52C6400U Unit: inch (mm) Unite: pouce (mm) Unidad: pulgada (mm) 1 3/64 (26.4) _2 47 9/16 (1208) /32 (72) 5 41/64 v _ 8 21 7/64 (536) __ 5° • _ ...................... .................. i i j, i -I I 4 1/2 617/6 41 (114) AN-52AG4 Active area/A,rea activa/Zone active 2 Thinnest part/Parte mb.
$HARR SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS-F419WJZZ 12P01-MX-NM
