User manual

Table Of Contents
14
AC Charger
AC Charger is an optional accessory. Be sure to use SB-AC12-
HDQC (SoftBank SELECTION Qualcomm
®
Quick Charge™ 2.0 AC
Adaptor for smartphones) or SB-AC13-HDMU (Micro USB, 1.0
A) specified by SoftBank Corp.
For information on other peripheral devices, see SoftBank
Website.
The following explains how to charge handset using SB-AC12-
HDQC (SoftBank SELECTION Qualcomm
®
Quick Charge™ 2.0 AC
Adaptor for smartphones).
・See User Guide for corresponding AC Charger.
・Never connect Micro USB plug while handset or AC Charger
is wet.
Insert Micro USB plug of AC Charger into External Device Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Check contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Extend blades and plug AC Charger into AC outlet
Charging starts and Charging/Notification Lamp
illuminates.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove Micro USB plug from External Device
Port, then unplug AC Charger and retract blades
Charging by PC
Connect handset to a PC with Micro USB Cable (SHDDL1;
optional accessory).
・Make sure that PC is turned on.
・Charging may not be possible/take a long time depending on
connection and PC conditions.
・Never connect Micro USB plug while handset or Micro USB
Cable is wet.
Insert Micro USB plug of Micro USB Cable into External Device
Port
・Insert Micro USB plug in correct orientation; otherwise,
External Device Port may be damaged. Check contours and
orientation of Micro USB plug, then insert it with tabs (○)
facing down.
Insert USB plug of Micro USB Cable into PC USB port
Charging starts and Charging/Notification Lamp
illuminates.
・Charging/Notification Lamp goes out when charge is full.
After charging, remove Micro USB Cable from handset and PC