User manual

23
Basic Operations
AQUOS Xx2
Operating by Gripping Handset (Grip
Magic)
By default, Display turns on when handset is gripped and
screen orientation does not change from vertical to horizontal
while handset is being held.
To enable/disable Grip Magic or change the settings:
In app sheet, (Settings)
Useful
Useful menu opens.
Grip magic
Grip magic menu opens.
Off
Grip Magic is enabled ( On ).
・
To disable Grip Magic, Tap On ( Off ).
Set each item
Setting is complete.
Grip Sensor
Be sure to grasp handset contacting Grip Sensor on both
the right and left sides. Grip Sensor does not respond
when touched on only one side. Grip Sensor also does not
respond when Proximity/Light Sensor or Proximity Sensor
for Grip Magic (at Display bottom/on the back surface) is
touched.
When letting go of handset, release Grip Sensor on both
sides. If one side remains contacted, Grip Sensor will
continue to react.
Grip Magic Operations
Setting Whether to Turn On Display when
Handset Picked Up
In Grip magic menu, Turn screen on by holding
・
Tap Turn screen on by holding to toggle on ( )/off
( ).
・If handset is picked up immediately after (about two
seconds) Pressing to turn Display off, Display may
not turn on when handset is picked up.
・If Proximity Sensor is covered by a hand or other object,
Display may not turn on even when Grip Sensor is
touched, or operation may not be possible. Also, Display
may turn off regardless of handset settings.
Setting Whether to Minimize Volume and Use
Vibrator when Handset Picked Up for Incoming
Call
In Grip magic menu, Volume down for incoming calls
・
Tap Volume down for incoming calls to toggle on
( )/off ( ).
Setting Whether to Prevent Vertical to
Horizontal Screen Change while Handset Held
In Grip magic menu, Deterrence rotate screen
・
Tap Deterrence rotate screen to toggle on ( )/off
( ).
・The feature may not follow the setting with certain
applications.
Viewing Tutorial on Grip Magic
In Grip magic menu, Let's Try! Follow onscreen
prompts