CODE : 00ZARM205/A1E DIGITAL COPIER AR-5220 MODEL AR-5220 AR-5220 (With SPF and ARD24 installed) CONTENTS [ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 [ 2 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 [ 3 ] CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1 [ 4 ] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . .
! CONTENTS [1] GENERAL 1. Note for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 [2] SPECIFICATIONS 1. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1 [3] CONSUMABLE PARTS 1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1 2. Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . .3-2 3. Production number identification . . . . . . . . . . . . . . . . . .
[1] GENERAL •poorly ventilated 1. Note for servicing Pictogram The label ( ) in the fusing area of the machine indicates the following: : Caution, risk of danger : Caution, hot surface A. Warning for servicing •exposed to direct sunlight •The fusing area is hot. Exercise care in this area when removing misfed paper. •Do not look directly at the light source. Doing so may damage your eyes. B.
!" # $% [2] SPECIFICATIONS D. First copy time (1) Basic speed 1. Copy mode First copy time 7.2sec (A4, 8.5" X 11"/1st tray/with OC) (Polygon motor ready state) A. Type Type Desk-top E. Document Paper exit Wing less Max. document size A3, 11" X 17" B.
!" # $% (2) Manual paper feed section K. Print density Paper feed size A3 ~ A6, 11" x 17" ~ 8.5" x 5.5" Density mode Auto / Text / Photo 5 steps (Text / Photo) Paper feed capacity 100 sheets(56 ~ 80g/m²) No. of manual adjustment Resolution Detection Size detection not available, paper empty detection available Writing: 600 x 600dpi Reading: 600 (main) x 600 (sub) (PHOTO mode) 600 (main) x 300 (sub) (AE mode) Weight 56 ~ 200g/m² (15 ~ 34 lbs.
& !" # $% O. Additional functions R. External view APS O AMS O External dimensions (W x D x H) 590 x 577 x 520 mm(AR-M205) 590 x 577 x 470 mm(AR-5220) Occupying area (W x D) 590 x 531mm (When the manual tray is installed.) Weight About 31.3kg (AR-5220) About 35.1kg (AR-M205) Auto tray switching O Memory copy O Rotation copy E-sort O Rotation sort X Option S.
3 CONSUMABLE PARTS AR5220 SERIES SRU (LAG) No.
) !"# !$% & '( 3. Production number identification A. Transport conditions (1) Transport conditions The label on the toner cartridge shows the date of production. Humidity (%) 2. Environmental conditions Production place Serial number Year/ Month/ Day Ver.No.
! "# $ % [4] EXTERNAL VIEWS AND INTERNAL STRUCTURES 1. Appearance 1 17 6 1 15 2 16 3 5 3 9 4 7 10 14 11 8 1 4 7 10 13 16 Document feeder cover (when the SPF/ RSPF is installed) /document cover (when the document cover is installed) Power switch Front cover Side cover handle Bypass tray extension Parallel port 12 13 2 Document glass 3 Handles 5 8 11 14 17 Operation panel Paper trays Bypass tray guides Charger cleaner USB 2.
' ! "# $ % 4. Motor, solenoid, clutch 1 2 3 4 5 6 7 8 9 10 11 12 13 18 17 No. 1 Name Code 16 15 14 Function operation Mirror motor MRM Drives the optical mirror base (scanner unit). 2 Shifter motor SHTM 3 Toner motor TM 4 Duplex motor DPX Switchback operation and paper exit motor in duplex. 5 Cooling fan motor CFM Cools the inside of the machine. 6 Main motor MM Drives the machine.
! "# $ % 5. Sensor, switch 1 2 3 4 5 17 16 6 7 8 15 14 9 10 13 No.
( ! "# $ % 6. PWB unit 2 6 3 1 4 5 10 7 9 8 No. 1 2 3 4 5 6 7 8 9 10 Name Copy lamp Inverter PWB I / F PWB CCD sensor PWB Main control PWB Tray PWB IMC2 PWB 2nd cassette PWB High voltage PWB Power PWB Operation main PWB Function operation Copy lamp control USB1.1, IEEE1284 I/F Image scanning Main control PWB Shifter motor control Electronic sort, USB2.
) ! "# $ % 7. Cross sectional view 1 2 3 4 5 6 18 7 8 9 10 11 12 13 14 15 23 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Name Copy lamp Copy lamp unit LSU unit Lens unit MC holder unit Paper exit roller Transport roller Upper heat roller Lower heat roller Waste toner transport roller Drum unit Transfer charger unit DUP follower roller Duplex transport roller Resist roller Manual paper feed tray Manual paper pick up roller No.
! " [5]UNPACKING AND INSTALLATION 2) Open the front cover. •Hold the both sides and pull down to open. 1.Installing conditions A.Copier installation Do not install your copier in areas that are: •damp, humid, or very dusty •exposed to direct sunlight •poorly ventilated •subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. •Be sure to allow the required space around the machine for servicing and proper ventilation.
# ! " B.Toner cartridge installation 4.Removal and storage of fixing screw 1) Shake the toner cartridge several times horizontally, and remove the tape. * Do not hold the shutter lever when shaking. * After removing the tape, do not tilt or shake the toner cartridge. 1) Lift the knob and gently pull out the tray. 4 or 5 times Shutter Tape Handle 2) Hold the paper pressure plate and turn the fixing screw in the arrow direction.
$ ! " 5. Changing the copy paper size in the tray Note •The paper size setting cannot be changed when the machine has stopped temporarily due to running out of paper or a misfeed, or during interrupt copying. •During printing (even in copy mode), the paper size setting cannot be changed. •5-1/2" x 8-1/2" size paper can only be selected in upper paper tray. •Do not load paper that is a different size than the paper size setting. Copying will not be possible.
! CAUTION FOR BATTERY DISPOSAL (For USA,CANADA) Contains lithium-ion battery. Must be disposed of properly. Remove the battery from the product and contact federal or state environmental agencies for information on recycling and disposal options.
" COPYRIGHT c 2003 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Trademark acknowledgments Windows and Windows NT are trademarks of Microsoft Corporation in the U.S.A. and other countries.