OPERATION MANUAL (for network scanner) DIGITAL LASER COPIER/ PRINTER DIGITAL MULTIFUNCTIONAL SYSTEM
INTRODUCTION The optional Network Scanner Expansion Kit (AR-NS3) enables the machine to be used as a network scanner. This manual explains only the network scanner functions of the product. For detailed information on the software in the CD-ROM that accompanied the AR-NS3, please view the user's guide (PDF format) that is included on the CD-ROM.
TABLE OF CONTENTS Page Page INTRODUCTION................................................................. 1 ABOUT THE NETWORK SCANNER FUNCTION .............. 3 SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE...................................... 4 ACCESSING WEB PAGES ........................................... 4 ABOUT THE WEB PAGE .............................................. 4 BASIC SETTINGS FOR NETWORK SCANNING ......... 5 SETTING UP DESTINATION INFORMATION..............
ABOUT THE NETWORK SCANNER FUNCTION The AR-NS3 Network Scanner Expansion Kit adds network scanner functionality to your machine. A machine with the network scanner functionality can scan a paper document, photograph, or other printed information into a data file, and send the file to a file server or personal computer over a corporate network (intranet) or the Internet. You can select from the following transmission methods, depending on where you wish to send the scanned image data.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE To use the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be established. To establish the settings, use a computer that is connected to the same network as the machine to access the machine's Web page. The Web page can be displayed with your Web browser (Internet Explorer 5.5 or later (Windows)/5.1 or later (Macintosh), or Netscape Navigator 6.0 or later).
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE To use the network scanner function, you must configure basic network scanner settings (pages 5 - 6), store transmission destinations (pages 6 - 7), and program your sender's name (page 8). BASIC SETTINGS FOR NETWORK SCANNING Click "Network Scanning" in the menu frame, and then establish the required settings. This screen is passwordprotected (page 8). The network administrator must establish the settings after entering the password.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE Change custom index name screen This screen is displayed when you click "Custom Index" in the network scanning setup screen. Programmed destinations appear as one-touch keys in the Address book screen of the touch panel, and are normally included in the ABC index. Two types of indexes are available: the ABC index and group indexes (custom directories). Group indexes allow you to assign any index name to the destination for easy searching.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE Storing destinations for Scan to Desktop Click "Desktop" in the Destination Management screen. Use this screen to enter the destination addresses for Scan to Desktop. Scan to Desktop can only be used if Network Scanner Tool is installed in your computer (Network Scanner Tool is included on the CD-ROM that accompanies the Network Scanner Expansion Kit.) You can store a Scan to Desktop destination in the Web page, or in Network Scanner Tool.
SETTINGS AND PROGRAMMING REQUIRED FOR THE NETWORK SCANNER FEATURE STORING SENDER INFORMATION (Scan to E-mail) To store the sender information (Sender Name, E-mail Address) that is displayed when the recipient receives your e-mail, click "Sender" in the menu frame and then click "Add". Information for up to 999 different senders can be stored. Select a sender from the stored senders using the touch panel of the machine when you send an image (page 13).
CONDITION SETTINGS SCREEN OF SCANNER MODE The condition settings screen of scanner mode is displayed by pressing the [IMAGE SEND] key (refer to page 1-12 of "Operation manual (for general information and copier operation)") while the document filing mode, copy mode, or job status screen appears in the touch panel*1. In the explanations that follow, it is assumed that the initial screen that appears after pressing the [IMAGE SEND] key is the condition setting screen (shown below).
CONDITION SETTINGS SCREEN OF SCANNER MODE [FILE] key (page 14) Touch this key to store a document image that you are transmitting in the hard disk (this includes selecting a user name, file name, and location). [QUICK FILE] key (page 14) Touch this key to store a document image that you are transmitting in the temporary storage folder. [SEND SETTINGS] (page 12) Touch this key to set the subject, file name, and sender name.
CONDITION SETTINGS SCREEN OF SCANNER MODE select multiple destinations before touching this key. [BCC] key (page 14) This key is displayed only if the key operator program, "Display BCC", is set. If you wish to send a "BCC" ("Blind Carbon Copy") of a Scan to E-mail transmission to other recipients in addition to the main recipient, after selecting destinations using one-touch keys or the global address search function, touch this key.
SENDING AN IMAGE BASIC TRANSMISSION METHOD sure 1 Make mode. needed, adjust the resolution setting. 4 If(Refer to page 23.) the machine is in scanner EXPOSURE 300x300dpi RESOLUTION PDF MMR(G4) FILE FORMAT AUTO A4 ORIGINAL When the [IMAGE SEND] key light is on, the machine is in scanner mode. If the light is not on, press the [IMAGE SEND] key. Depending on the feature to be used, touch the [MODE SWITCH] key to select the E-MAIL/ FTP mode or the INTERNET-FAX mode.
SENDING AN IMAGE the desired file name or input the file 12 Select name. 8 Touch the [SUBJECT] key. The subject selection screen appears. The list of subjects that were registered on the Web FILE NAME page is displayed. SENDER NAME For Scan to FTP and ADD THE SEND Scan to Desktop, the subject cannot be set. Proceed to step 11. SEND SETTINGS SUBJECT the desired subject or 9 Select subject. To select among the displayed file names, touch the desired file No.02 Minutes of regular brie name.
SENDING AN IMAGE 16 Touch the [OK] key. NOTES Refer to page 6 to 7 for information on programming one-touch key destinations. When touching a one-touch key, corresponding information from the email destination screen is shown in the message display. Up to 35 characters can be displayed in the message screen, regardless of the number of characters that have been entered.
SENDING AN IMAGE you have another page to scan, change 24 Ifpages and then press the [START] key. Using the automatic document feeder Repeat this sequence until all pages have been scanned. You can change the resolution and exposure settings as needed for each page (refer to page 23). If no action is taken for one minute, scanning automatically ends and the transmission job is stored. 23 Press the [START] key. Scanning begins and the transmission job is stored.
SENDING AN IMAGE DESTINATION INPUT METHODS In the section of "BASIC TRANSMISSION METHOD", a destination is specified with a one-touch key (steps 18 to 20). This machine, however, provides the following destination input methods. Manual entry: Enter the e-mail address directly. (only for Scan to E-mail and Internet-Fax transmission) (Quick) key: After touching the key, enter the three-digit number that was assigned when the address was registered.
SENDING AN IMAGE Address entry with 1 Touch the (Quick) key 2 Touch the desired LDAP server key. key. SERVER CHANGE OK CANCEL Document division 1 1/2 Document division 2 E-MAIL/FTP MODE SWITCH A1210 project team Software development centre To search the highlighted server, proceed to step 3. 3 Touch the [OK] key. 2 Enter the three-digit assigned number. When a three-digit number is entered, the relevant address will be set as a destination address.
SENDING AN IMAGE 6 Touch the desired destination key. Touch the [OK] key to return to the initial screen. NOTE When you perform a broadcast transmission, the compression mode set with the key operator program, "Compression mode at broadcasting" (page 55), is used as the file compression mode for all destinations.The default setting is "MMR (G4)". To display the remaining destinations, touch the tanaka a tana [ ] key.
SENDING AN IMAGE SCANNING AND TRANSMITTING A TWO-SIDED ORIGINAL A two-sided original can be automatically scanned and transmitted using the automatic document feeder. Follow the steps below. sure the machine is in scanner mode 1 Make and then load the document in the 4 Touch the [OK] key. automatic document feeder. RESEND 2 Touch the [ORIGINAL] key. SIZE AUTO When you touch the [ORIGINAL] key, check the original size displayed in the key.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) When sending an image, you can adjust the original size, exposure, resolution, and file format settings as needed. MANUALLY SETTING THE SCANNING SIZE If you load an original that is not a standard size (such as an inch size), or if you wish to change the scanning size, touch the [ORIGINAL] key and set the original size manually.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) selected size appears in the top half of 6 The the [ORIGINAL] key. 4 Touch the [OK] key. A4 OK A4R AB B4 INCH The specified original size is displayed as the scan size. 300x300dpi RESOLUTION PDF MMR(G4) FILE FORMAT A4 ORIGINAL 5 Touch the [OK] key. 00% SEND SIZE AUTO NOTE You can return to automatic detection by pressing the [CA] key. You will return to the initial screen.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) the X (width) and Y (length) dimensions 6 Enter of the original with the keys. 9 To exit, touch the [ORIGINAL] key. X (width) is initially selected. A Y Enter X and then touch (64 432) 420 mm X the ( ) key to enter Y. (64 297) A width of 64 to 432 mm Y 297 mm (2-1/2" to 17") can be RECALL STORE/DELETE entered in X, and a length of 64 to 297 mm (2-1/2" to 11-5/8") can be entered in Y.
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) SELECTING THE EXPOSURE You can adjust the exposure manually to match the type of original. After loading the original in scanner mode, follow the steps below. The default setting for the exposure is "AUTO". Change the exposure 1 Touch the [EXPOSURE] key. 3 Touch the [OK] key. AUTO EXPOSURE 300x300dpi RESOLUTION PDF MMR(G4) FILE FORMAT AUTO A4 Select [AUTO] or [MANUAL].
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT) 3 Touch the [OK] key. For resolution other than [200x200dpi], the [HALF TONE] key can be selected. OK Internet-Fax mode You will return to the initial screen. READY TO SEND.
SPECIAL FUNCTIONS You can use various functions for scanning and transmitting images. Set these functions as needed. ERASING EDGE SHADOWS (ERASE) The erase function is used to erase the shadow lines on images produced when scanning thick originals or books. The erase modes that can be selected are shown below. The erase width is approximately 10 mm (1/2") in its initial setting.
SPECIAL FUNCTIONS TRANSMITTING A DIVIDED ORIGINAL (DUAL PAGE SCAN) When an open book is scanned and transmitted, you can use this function to divide the two open pages of the book into two separate pages. This function can only be used when the original is scanned using the document glass.
SPECIAL FUNCTIONS AUTOMATIC TRANSMISSION AT A SPECIFIED TIME (TIMER TRANSMISSION) This feature enables you to set up a transmission to be performed automatically at a specified time up to a week in advance. A combined total of 97 timer transmission and memory transmission jobs can be stored. NOTES To perform a timer transmission, the document must be scanned into memory.
SPECIAL FUNCTIONS TRANSMITTING TWO ORIGINAL PAGES AS A SINGLE PAGE (2IN1) This function allows you to reduce the size of original pages by one half to fit two pages evenly on one page when transmitting.
SPECIAL FUNCTIONS the image as explained in "BASIC 4 Send TRANSMISSION METHOD" (pages 12 to 3 Touch the [OK] key. You will return to the screen of step 1. RESEND SPEAKER 15). OK NOTE To cancel 2in1... DUAL PAGE SCAN Press the [CA] key. TRANSMITTING THE FRONT AND BACK SIDES OF A CARD ON ONE SHEET OF PAPER (CARD SHOT) When scanning a card, this function allows you to combine the front and back sides on a single sheet of paper. To use this function, the original must be scanned on the document glass.
SPECIAL FUNCTIONS the back side of the original face 8 Place down on the document glass. (see step 5) To have the images enlarged by a suitable ratio based on the entered original size so that the front and back sides fit into a 210 mm x 420 mm (8-1/2" x 17") area, touch the [FIT TO SEND SIZE] key. To cancel the card shot function, touch the [CANCEL] key. 9 Press the [START] key. The back side of the card is scanned. 4 Touch the outer [OK] key.
SPECIAL FUNCTIONS TRANSMITTING A LARGE NUMBER OF PAGES (JOB BUILD) When you need to scan more pages than can be loaded in the automatic document feeder at once, use this function to scan the pages in sets. The maximum number of pages that can be loaded in the automatic document feeder is 150.
SPECIAL FUNCTIONS PROGRAMMING (PROGRAM) FREQUENTLY USED OPERATIONS This function allows you to store the steps of an operation, including the destination and scanning settings, into a program. When you want to send a document to that destination, you can simply call up the program and the steps will be performed automatically. This function is convenient when you frequently send documents, such as a daily report, to the same destination. Up to eight programs can be stored.
PRIORITY TRANSMISSION OF A STORED JOB If you have an urgent transmission job and multiple transmission jobs have already been stored, you can give priority to the urgent job so that it will be transmitted immediately after the job currently being executed. This is done from the job status screen. For details on using the job status screen, refer to page 1-14 of Operation manual (for general information and copier operation). the key of the job to which you wish 3 Touch to give priority.
CANCELLING AN E-MAIL/FTP TRANSMISSION You can cancel a transmission job that is in progress or that has been stored. Cancellation is done from the scanner job status screen for the mode in which you stored tramsmission. the job key of the transmission job 3 Touch you wish to cancel. 1 Press the [JOB STATUS] key. The touched key is highlighted. 4 Touch the [STOP/DELETE] key. ING ING ING the mode 2 Touch [INTERNET-FAX]).
INTERNET FAX RECEPTION For reception of Internet-Fax data, this machine connects automatically to the mail (POP3) server at specified intervals* to check to see if new Internet-Fax data has been received. If new data has been received, this machine reads and prints it. However, you can manually check and print new Internet-Fax data immediately using the following procedure. * The setting is normally 5 minutes.
TRANSFERRING RECEIVED INTERNET-FAXES TO ANOTHER MACHINE WHEN PRINTING IS NOT POSSIBLE (FORWARDING FUNCTION) When printing is not possible because of a paper, toner, or other problem, you can transfer received Internet-Faxes to another Internet-Fax machine if that machine has been appropriately programmed in your machine. This function can be conveniently used in an office or other workplace where there is another Internet-Fax machine.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL One-touch and group keys for Scan to E-mail and Internet-Fax, group indexes, and senders can also be stored, edited and deleted from the touch panel of the machine. STORING ONE-TOUCH KEYS (only addresses for Scan to E-mail and Internet-Fax) The touch panel of the machine can also be used to store destinations for Scan to E-mail and Internet-Fax.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 8 Touch a letter key. INITIAL CANCEL Q W E R T Y U I O A S D F G H J K L Z X C V B N M Touch the [ADDRESS] key. 13No.048 OK E-MAIL P ABC The E-mail address entry screen appears. SHARP NAME INITIAL abc FAX S ADDRESS SPACE Up to 10 search characters can be entered. If you make a mistake, touch the key to delete the mistake and then enter the correct character. the 14 Enter destination.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL you have finished programming the 19 When one-touch key, touch the [EXIT] key. Settings for Scan to E-mail File type: PDF*/TIFF Compression mode: NONE/MH(G3)/MMR(G4)* If you wish to program another one-touch key, touch the [NEXT] key. Settings for Internet-Fax Compression mode: MH(G3)*/MMR(G4) The default setting is indicated by an asterisk (*). When you have completed the settings, touch the [OK] key.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 7 Touch the [YES] key. The following steps are for deleting a one-touch key. 6 Touch the [DELETE] key. If you wish to delete another one-touch key, repeat steps 3, 6, and 7. DELETE THE ADDRESS? SHARP CORPORATION DELETE EXIT NO YES T-FAX 1/2 NOTES If you cannot edit or delete a one-touch key If you attempt to edit or delete a one-touch key in the following situations, a warning message will appear and editing/deletion will not be possible.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 7 Touch the [OK] key. If you touch the wrong key, simply touch it again to cancel the highlighting and remove the destination from the group. The number of destinations in the group appears to the right of the [ADDRESS] key. NOTE the name of the key (refer to step 16 8 Check on page 38). One group key cannot be stored in another group key. Group keys appear grayed out and cannot be selected.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL The following steps are for deleting a group key. DIRECT ADDRESS / GROUP SELECT ADDRESS. A C GROUP OK SHARP CORPORATION DIRECT ENTRY CORPO.TPS *0 FREQUENT USE ABCD 6 Touch the [DELETE] key. 1/2 EFGHI JKLMN OPQRST UVWXYZ ADDRESS REVIEW ABC The one-touch keys stored in the group are highlighted. To add another one-touch key to the group, touch the key to highlight it.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 4 Touch the [SENDER NAME] key. 9 Touch the [OK] key. The "No." that automatically appears is the lowest number from 001 to 999 that has not yet been programmed. When [SENDER NAME] is touched, the letter-entry screen appears. No.001 SENDER NAME INITIAL CANCEL I O J K L M 5 Enter the sender name. P abc ABC 10 Touch the [INDEX] key.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 14 Enter the e-mail address of the sender. CANCEL E-MAIL ADDRESS 17 Touch the [LOGIN NAME] key. No.001 SENDER NAME OK ppd1@sharp.co INITIAL ADDRESS KEY NAME LOGIN NAME ABC abc AB/ab SPACE 12#$% Up to 64 characters can be entered. If you make a mistake, touch the key to move the cursor ( ) back one space and then enter the correct character. 18 Enter the login name. LOGIN NAME 15 Touch the [OK] key. CANCEL document d INDEX ppd1.sharp.co.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 4 Edit or delete the sender. SENDER CONTROL / AMEND/DELETE No.001 SENDER NAME document INITIAL INDEX d ppd1@sharp.co.jp ADDRESS KEY NAME document LOGIN NAME ********** DELETE Edit sender information in the same way that you stored it. When finished, touch the [EXIT] key to return to the screen of step 3. To delete the sender, touch the [DELETE] key. A message appears asking you to confirm your selection.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL 3 Touch the [SENDING ADDRESS LIST] key. 4 Touch the key of the list you wish to print. ADDRESS LIST ALL CUSTOM SETTING LIST INDIVIDUAL LIST SENDING ADDRESS LIST GROUP LIST PROGRAM LIST MEMORY BOX LIST [PROCESSING PRINT DATA] appears in the message display and printing begins. To cancel printing, touch the [CANCEL] key. NOTES The list is printed before other print jobs waiting to be printed.
STORING, EDITING, AND DELETING FROM THE TOUCH PANEL settings are displayed. Make sure 7 Your they are correct. NOTE Up to 500 destinations can be stored in a program. Destinations can be entered using one-touch keys, group keys, and (Quick) key. PROGRAM No.1 REGISTRATION IS COMPLETED PROGRAM NAME SHARP PROGRAM 6 Touch the [OK] key.
TROUBLESHOOTING If a problem or question arises, try to solve the situation using the following information before contacting your authorised SHARP dealer. The image cannot be scanned. Cause: The original is loaded upside down. Solution:If you are using the document glass, the original must be placed face down. If you are using the automatic document feeder, the original must be inserted face up. A moiré (stripe pattern) appears on the scanned image.
TROUBLESHOOTING The recipient does not receive transmitted data. Cause: An incorrect destination was selected. Otherwise, there is a mistake in the information stored for the destination (e-mail address or FTP server information). Solution:Select the correct destination and make sure the correct information is stored for the destination. (Refer to page 6.
TROUBLESHOOTING Error Code Table Error Code Description of the Error CE-01 The network interface card is out of order. CE-02 Cannot find the specified mail server or FTP server. CE-03 The server was down during the scanning of the original. CE-04 An invalid account name or password for the FTP server has been entered. CE-05 An invalid directory of the FTP server has been entered. CE-06 Cannot find the specified mail server (POP3 server).
TROUBLESHOOTING IMPORTANT POINTS WHEN USING SCAN TO E-MAIL Be very careful not to send image data files that are too large. Your mail server's system administrator may have placed a limit on the amount of data that can be sent in one e-mail transmission. If this limit is exceeded, the e-mail will not be delivered to the recipient.
KEY OPERATOR PROGRAMS This section explains the key operator programs that are related to the network scanner feature of the machine. Key operators should read this section well to ensure correct use of the programs. For key operator programs that are related to general use of the machine, see the key operator's guide.
KEY OPERATOR PROGRAMS the [OPERATION SETTINGS] key, 5 Touch the [E-MAIL/FTP SETTINGS] key or the [I- the [OK] key to return to the screen 7 Touch of step 5. FAX SETTINGS] key, depending on the program you wish to use. If you wish to use another program, touch the key for that program in the screen of step 5. R PROGRAMS SETTINGS OK OPERATION SETTINGS FAX SETTINGS E-MAIL/FTP SETTIN I-FAX SETTINGS 8 Press the [CA] key to exit the program. desired 6 Make program.
KEY OPERATOR PROGRAMS SETTING PROGRAMS The setting programs for the network scanner feature of the machine are explained here. For key operator programs that are related to the copy function and general use of the machine, see the key operator’s guide. For programs related to the printer and network scanner functions, see the corresponding manuals.
KEY OPERATOR PROGRAMS Scan complete sound setting Initial file format setting This program is used to set the volume of the beep sound that informs you that the original has been scanned. Two volume levels are available, or the beep can be turned off. You can change the default file format (file type, compression mode, and file creation method) used when the e-mail address is entered manually for a Scan to E-mail transmission.
KEY OPERATOR PROGRAMS the [OWN ADDRESS] key and enter 2 Touch the e-mail address. This program is normally configured so that part of the fax is printed on the transaction report when a transmission is not successful. The address entry screen appears. Enter up to 56 characters for the e-mail address. If you make a mistake, press the key and reenter the correct character. Be sure to enter the name and address regardless of I-Fax reception report setting.
KEY OPERATOR PROGRAMS value from 1 minute to 240 hours in 1 minute increments. The default setting is one hour. Touch the "HOUR" and "MINUTE" keys and then set the hour by touching the and keys. Set the minute in the same way. When finished, touch the [OK] key. KEY OPERATOR PROGRAMS I-FAX RECEPTION REPORT REQUEST TIMEOUT SETTING SET THE TIME FOR I-FAX RECEPTION REPORT REQUEST TIMEOUT. (1 min.
KEY OPERATOR PROGRAMS Reception check interval setting Number of resend times at reception error This setting determines the interval at which the machine checks automatically to see if the mail (POP3) server has received new mail. After finding a new e-mail, the machine loads the data and prints it. The interval can be set from 0 minute to 8 hours in 1 minute increments. The default setting is 5 minutes. If you set 0 minute, the machine does not check automatically for new e-mails.
KEY OPERATOR PROGRAMS Anti junk mail/domain name setting Set address for data forwarding This program is used to enter addresses from which you wish to block I-Fax reception. Up to 50 addresses can be entered. This program is normally disabled. To block reception from the entered addresses, touch the [REJECT RECEPTION] key. To allow reception from the entered addresses, touch the [ALLOW RECEPTION] key. To ignore entered addresses and allow reception from any addresses, touch the [ALL INVALID] key.
KEY OPERATOR PROGRAMS PRINTING OUT SETTINGS Settings established with the key operator programs can be verified by printing them out. 1 Press the [CUSTOM SETTINGS] key. the [KEY OPERATOR PROGRAMS 5 Touch LISTS] key. KEY OPERATOR PROGRAMS LIST PRINT OK KEY OPERATOR PROGRAMS LIST IMAGE SENDING ACTIVITY REPORT (FAX) ANTI JUNK FAX NUMBER LIST the [KEY OPERATOR PROGRAMS] 2 Touch key. DEFAULT SETTINGS SENDER CONTROL 6 Touch the [IMAGE SEND] key.
SPECIFICATIONS For information on power requirements, power consumption, dimensions, weight, and other specifications that are common to all features of the machine, refer to Operation manual (for general information and copier operation).
OPERATION MANUAL (for network scanner) ARM550N-EX1-SCANNER
