Instruction manual

Sharp MX-3501N
www.BERTL.com
tel. [phone]
fax. [phone]
[e-mail]
Copyright © 2006 MCA Internet, LLC dba BERTL 2-May-06
All Rights Reserved. The license under which this document is made available and applicable law prohibit any
reproduction or further transmission of any portion of this document. This document may only be viewed elec-
tronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any
reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or
omissions contained in this document.
Page 29
Color at Work
®
Print
The Sharp MX-3501N’s network printing is
standard. Printing is powered by a
600MHz controller with 640MB RAM and a
80GB hard drive providing adequate
memory for spooling and storing
documents.
Ethernet and USB 2.0 connectivity are
included as standard.
Within the standard printing package users
receive PCL5c and PCL6, with PostScript
available as an upgrade item.
Direct PDF and TIFF Printing
PDF and TIFF printing are available with
the addition of the PostScript upgrade kit.
Driver Layout
We were pleased to see that layout of the
PCL6 and PostScript drivers are nearly
identical, with the addition of a few
PostScript-specific features within the
Advanced tab including the added ability to
set screen frequency and angle, mirror
image and job compression levels.
The similar operation of the drivers means
that users who switch between the two
drivers should have no difficulty during the
transition. Both drivers are laid out well
with a geographical job summary on the
left side of each tab.