Service manual

AR-C200P Rev.5 172 /
LED
Atten
Varies
Varies
Varies
Light
Light
Light
Light
Light
Light
Light
Light
Light
Light
LCD Messages
_
COLOR ADJUSTING
_
DENSITY ADJUSTING
_
MEDIA WEIGHT DETECTING
_
YELLOW TONER SENSOR
ERROR
_
MAGENTA TONER SENSOR
ERROR
_
CYAN TONER SENSOR
ERROR
_
BLACK TONER SENSOR
ERROR
_
NON PAPER SENSE ERROR
_
PAPER SENSE ERROR
BELT REFLEX ERROR
DENSITY SHUTTER ERROR2
DENSITY SHUTTER ERROR1
DENSITY COLOR
CALIBRATION ERROR
Err
Code
*
*
*
*
Description
Executing Auto Color Adjusting
Executing Auto Density Adjustment
Detecting media weight.
Something is wrong with the toner
sensor. When the Engine setting is
Shipping mode, displayed in a
combination of other message in the
first line. If the engine setting is Factory
mode, error display appears as
mentioned later
A Sensor output at Paper Empty is
outside the spec. Prints according to
the Media Weight MIDIUM when this
error occurs
The difference in Sensor outputs is
outside the spec. (The weight is beyond
the recognizable limits.) At Error, Prints
according to the Media Weight MEDIUM
Belt Reflex Check Error.Error that does
not occur at user level.Displayed only in
FactoryMode.
Density Adjustment Shutter Error
2.Error that does not occur at user
level.Displayed only in FactoryMode.
Density Adjustment Shutter Error
1.Error that does not occur at user
level.Displayed only in FactoryMode.
Density Adjustment Color Calibration
Error.Error that does not occur at user
level.Displayed only in FactoryMode.
LED
Ready
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Varies
Comments
2. Error messages : Color, Media Detect
(Caution) * : Raise in the factory mode only.