Service manual
Table Of Contents
AR-C200P Rev.5 49 /
Outlet
1
2
1
5
5
5
5
3
3
4
6
8
7
2.3.23 Electrical Chassis Cooling Fan
(1) Unscrew the four screws 1 to remove the plate A 2.
(2) Unscrew the thirty-four screws 3 to remove the shield plate B 4.
(3) Remove the printer engine controller PWB (see section 2.3.24).
(4) Unscrew the eleven screws 5 to remove the shield plate 6.
(5) Unscrew the two screws 7 to demount the electrical chassis cooling fan 8.
Figure 2-3-23 Electrical Chassis Cooling Fan