Service manual

Table Of Contents

AR-C200P Rev.5 79 /

3.1.2 Engine maintenance mode

Three modes from Level 1 to Level 3 are in the engine maintenance mode. Level 1 is a mode that

checks the media transport and basic movement of the print system. Level 2 checks the counter

for consumables and tests the correcting function of color displacement, and is a mode that does

not require special knowledge. Level 3, on the other hand, requires special knowledge for handling

the process parameter setting and is contained in the independent experimental element of PU.

Basically, levels other than Level 1 should not be used.

3.1.2.1 Operator panel

The description for operations related to self-diagnosis is made presuming the arrangement of the

operator panel shown below.

0123

4567

3.1.2.2 Normal self-diagnostic mode (Level 1)

Items in the normal self-diagnostic mode menu are listed below.

• Switch scan test

• Motor & clutch test

• Executing test pattern

• NVM initialization

• Consumables counter display

• Consumables continuation counter display

0123

4567

SHARP

ARC200P

SHARP