User Manual

6
ENGLISH
CLEAR ALL MEMORY
This program is used to manually clear all data from the memory and hard disk of the
machine.
Note, however, that the following types of data are not cleared with this program. Use the
"CLEAR ADDRESS BOOK DATA/IMAGE SEND REGISTERED DATA" program on page 7
to clear the following types of data
●
INDIVIDUAL/GROUP/PROGRAM/RELAY BROADCAST MEMORY BOX*
●
SENDER CONTROL LIST
●
POLLING MEMORY/CONFIDENTIAL MEMORY BOX*
●
SENDER DATA
●
ALLOW/REJECT RECEPTION SETTING DATA (INCLUDING POLLING PASSCODE
NUMBER)
* The image data stored in the MEMORY BOX is cleared to execute this program (CLEAR
ALL MEMORY).
Touch the [CLEAR ALL MEMORY] key. The following screen appears asking you to confirm
your selection ("YES" or "NO").
[Clear screen 1]
●
To return to the "SECURITY SETTINGS"
menu screen, touch the [NO] key.
●
To clear all memory, press the [YES] key.
"PLEASE WAIT." appears, and then the
following screen is displayed.
[Clear screen 2]
●
While data clearing takes place, the
percentage of data cleared and the number of
repetitions is displayed.
●
When the data has been cleared, the power
briefly turns off and then automatically turns
on again.
NOTE
We recommend that you execute this program before turning off the power.
If you wish to cancel after data clearing has begun
Touch the [CANCEL] key. The key operator code entry screen will appear. Enter the key
operator code with the numeric keys. Data clearing will stop as soon as the correct key
operator code is entered. Note that any data cleared prior to entry of the key operator
code will not be restored (this data is lost).
CLEAR ALL MEMORY.
(EXCLUSIVE OF ADDRESS BOOK/
SENDER LIST DATA.)
NO YES
100%50%0%
(50.0%) (1/1 time)
CLEARING ALL MEMORY. AUTO REBOOT IS
IMPLEMENTED AFTER CLEARING.
CANCEL
ページ 󲥿󲥽󲥽４年󲥿月４日 水曜日 午前󲥾󲥽時󲥿７分