Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-6
<List of set values 1>
<List of display values 1>
<List of set values 2>
Main code 46
46-12
Purpose Adjustment
Function (Content) Used to adjust the print density in the FAX mode
(all modes). An adjustment with this simulation
affects all the reading density adjustment values.
(Only when FAX is installed)
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX auto adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 0-2, AND PRESS START.
0. TRAY SELECT 1. COPY START
2. FAX EXP. LEVEL
1
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET),INPUT VALUE 0-99, AND PRESS
START.
2. FAX EXP. LEVEL
50
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5.BPT
1
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). NOW PRINTING.
1
50
Select other than 0 - 1,
and press [START] key.
Select 1, and
press [START] key.
Select 0, and
press [START] key.
Press [START] key.
Press [CUSTOM SETTINGS] key
Press [CUSTOM SETTINGS] key
Press [CUSTOM SETTINGS] key
Or copying is terminated.
Press [START] key or
0 Paper feed tray selection
1 Copy start (Default)
2 FAX mode exposure setup
Normal display “NOW PRINTING”
ERROR display DOOR OPEN.
JAM
PAPER EMPTY.
1TRAY1
2TRAY2
3TRAY3
4TRAY4
5 Manual feed
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 6 ページ ２００４年１０月２６日 火曜日 午後３時４４分