Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-18
<List of set values>
* Dial is send with the setup value of +29ms.
<List of set values>
* Dial is send with the setup value of +9ms.
66-13
Purpose Setup
Function (Content) Used to enter (set) the number for the FAX dial
signal output test. (The dial number signal set
with this simulation is outputted in the dial signal
output test with SIM 66-14~16)
(Only when FAX is installed.)
Section FAX
Item Data
Operation/Procedure The dial test number is set.
Enter a number with 10 digit key pad, * key, and
# key.
The upper limit is 20 digits.
Press CLEAR to return to the initial state.
Press START to register.
66-14
Purpose Setup
Function (Content) Used to set the make time in the FAX pulse dial
mode (10PPS) and to test the dial signal output.
(The dial number signal set with SIM 66-13 is
outputted.)
Used to check dialing troubles and the operation.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The dial test is performed. (10PPS output)
The make time is set. (Set range : 0-15)
When CUSTOM SETTING is pressed, the
execution is terminated.
0Execution
1 Dial pulse make time setup (0 - 15)
SIMULATION 66-13
DIAL TEST NUMBER SETTING.
INPUT NUMBER AND PRESS START.
0123456789*#01234567
0-9:[0-9], *:[*], #:[ ]
#
SIMULATION 66-14
DIAL TEST(10PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1.MAKE TIME
1
SIMULATION 66-14
DIAL TEST(10PPS). SELECT 0-15, AND PRESS START.
[1.MAKE TIME]
7
7
; [ ms]
+29
SIMULATION 66-14
DIAL TEST(10PPS). EXECUTING...
1.MAKE TIME
7
; [ ms]
+29
Select 1 and press [START] key.
Press [CUSTOM SETTINGS] key
or [START] key.
Select 0 and
press [START] key.
Press [CUSTOM SETTINGS] key.
66-15
Purpose Setup
Function (Content) Used to set the make time in the FAX pulse dial
mode (20PPS) and to test the dial signal output.
(The dial number signal set with SIM 66-13 is
outputted.)
Used to check dialing troubles and the operation.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The dial test is performed. (20PPS output)
The make time is set. (Set range : 0-15)
When CUSTOM SETTINGS is pressed, the
execution is terminated.
0Execution
1 Dial pulse make time setup (0 - 15)
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-1, AND PRESS START.
0. EXECUTE
1.MAKE TIME
1
SIMULATION 66-15
DIAL TEST(20PPS). SELECT 0-15, AND PRESS START.
[1.MAKE TIME]
7
7
; [ ms]
+9
SIMULATION 66-15
DIAL TEST(20PPS). EXECUTING...
1.MAKE TIME
7
; [ ms]
+9
Select 1 and press [START] key.
Press [CUSTOM SETTINGS] key
or [START] key.
Select 0 and
press [START] key.
Press [CUSTOM SETTINGS] key.
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 18 ページ ２００４年１０月２６日 火曜日 午後３時４４分