Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-19
* For the set value, refer to the soft SW specifications.
<List of set values>
For the set values, refer to the soft SW specifications.
<DTMF signal>
<DTMF signal>
66-16
Purpose Setup
Function (Content) Used to test the dial signal (DTMF) output in the
FAX tone dial mode. (The dial number signal set
with SIM 66-13 is outputted.)
The send level can be set to an optional level.
Used to check dialing troubles and the operation.
Section FAX
Item Operation
Operation/Procedure The dial test is performed. (DTMF signal output)
1) The level (dB) setup is made.
(Set range: 0 - 15dB)
2) The difference between high group and low
group is set. (Set range: 0 - 15)
3) When CUSTOM SETTING is pressed,
the execution is terminated.
0Execution
1 HIGH High group level
2 HIGH-LOW High group - low group
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-2, AND PRESS START.
0. EXECUTE
1.HIGH (dB) 2.
1
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.
1.HIGH (dB)
7
SIMULATION 66-16
DIAL TEST(DTMF). SELECT 0-15, AND PRESS START.
2.
7
7 7
HIGH-LOW
7 7
HIGH-LOW
HIGH-LOW
SIMULATION 66-16
DIAL TEST(DTMF). EXECUTING...
1.HIGH (dB) 2.
Select 1 or 2 and press [START] key.
Press [CUSTOM SETTINGS] key
or [START] key.
Select 0 and
press [START] key.
Press [CUSTOM SETTINGS] key.
(When 1 is selected)
(When 2 is selected)
(When 0 is selected)
66-17
Purpose Setup
Function (Content) Used to test the dial signal (DTMF) output in the
Fax tone dial mode. Send level Max.
Used to check the dial IC operation.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The DTMF signal output is checked.
(Output level 0)
When CUSTOM SETTING is pressed,
the execution is terminated.
1 - 9, 0, *, #
66-18
Purpose Setup
Function (Content) Used to test the dial signal (DTMF) output in the
Fax tone dial mode.
The send level set with the soft switch is
outputted.
Used to check the dial IC operation.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The DTMF signal output is checked.
(Output level is set with soft SW.)
When CUSTOM SETTING is pressed,
the execution is terminated.
1 - 9, 0, *, #
SIMULATION 66-17
DTMF SIGNAL OUTPUT.(LEVEL MAX) INPUT 0
9,* ,#, AND PRESS START.
1
SIMULATION 66-17
DTMF SIGNAL OUTPUT.(LEVEL MAX) EXECUTING...
1
Press [START] key.
Press [CUSTOM SETTINGS] key.
SIMULATION 66-18
DTMF SIGNAL OUTPUT.(SOFT SW) INPUT 0
9,* ,#, AND PRESS START.
1
SIMULATION 66-18
DTMF SIGNAL OUTPUT.(SOFT SW) EXECUTING...
1
Press [START] key.
Press [CUSTOM SETTINGS] key.
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 19 ページ ２００４年１０月２６日 火曜日 午後３時４４分