Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-20
<Set values>
<Set value>
<List of set values>
66-19
Purpose Setup
Function (Content) Used to backup the Address data
(Set values of rapid key dialing) into the flash
Memory (AR-MM9).
(When FAX is installed and FAX extended
memory is installed.)
Section FAX
Item Operation
Operation/Procedure Address data is backed up into Flash ROM.
Contents of backup data
•One-touch
•FTP expansion
•Group expansion
•Program
•User index
•Standard sender
•I-FAX sender registration
•Polling allow number
•Memory box
•Sender's name
•FAX sender
•Subject
•File name
•FAX receive select table
•iFAX receive YES/NO
The data other than the above are not backed
up.
1 Backup executed
2 No backup
66-20
Purpose Setup
Function (Content) Used to restore the backup data (SIM 66-19) to
Address data. (When FAX is installed and FAX
extended memory is installed.)
Section FAX
Item Operation
Operation/Procedure Address data backed up with SIM 66-19 are read
from the option Flash ROM and written into the
machine.
However, data backed up in the Tiger series
cannot be restored to the machine. If an option
Flash ROM backed up in the Tiger series is
installed, the data in the option Flash ROM are
deleted.
1
1
Press [START] key.
After completion of backup
SIMULATION 66-19
ADDRESS DATA BACK UP. (WRITE TO FLASH ROM)
ARE YOU SURE?
1. YES
2. NO
SIMULATION 66-19
ADDRESS DATA BACK UP. (WRITE TO FLASH ROM) EXECUTING...
1 Read/Write executed
2 Read/Write not executed
66-21
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to print the FAX information (registrations,
communication management, file management,
system errors). (Only when FAX is installed.)
Section FAX
Item Data
Operation/Procedure Information related to FAX is printed.
1) Enter the number corresponding to the
information(item) to be printed with 10-key.
2) Press [start] key.
1 REGISTERED Various registered information
2 MANAGEMENT Communication management information
3FILE
MANAGEMENT
File management information
4 SYSTEM ERROR System error information
5 PROTOCOL Protocol information
1
1
Press [START] key.
After completion of reading
SIMULATION 66-20
ADDRESS DATA (READ FROM FLASH ROM)
ARE YOU SURE ?
1. YES
2. NO
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING...
0
SIMULATION 66-21
FAX INFORMATION PRINT OUT.EXECUTING...
1. REGISTERED
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1.REGISTERED 2.MANAGEMENT
3.FILE MANAGEMENT 4.SYSTEM ERROR
5.PROTOCOL
Select other than 0 and
press [START] key.
If there is no print data,
the display returns to the
original state without printing.
After completion of printing
(When 1)
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 20 ページ ２００４年１０月２６日 火曜日 午後３時４４分