Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-21
(This mode is for development, and inhibited in the market.)
<List of set values>
(This mode is for production check, and inhibited in the market.)
<Display message>
66-23
Purpose Operation test, check
Function (Content) Used to download the FAX program.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The contents of ROM in the option memory
(AR-MM9) installing section are copied as FAX
program.
66-24
Purpose Operation test, check
Function (Content) Used to clear the FAST memory data.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure 1) Select with 10 digit key pad, press START to
execute the following.
1: Fast memory data clear
2: Not clear
66-29
Purpose Setup
Function (Content) Used to clear the Address data.
Section FAX, NWS
Item Operation
Operation/Procedure 1) Select with 10 digit key pad and press START
to execute the following.
1: Address data clear
2: Address data not clear
SIMULATION 66-23
FAX PROGRAM DOWNLOAD.
EJECT PROTECT PIN, AND PRESS START.
SIMULATION 66-23
FAX PROGRAM DOWNLOAD. EXECUTING...
SIMULATION 66-23
FAX PROGRAM DOWNLOAD.
FAIL
CHECK PROTECT PIN
SIMULATION 66-23
FAX PROGRAM DOWNLOAD.
COMPLETE
POWER OFF, AND SET PROTECT PIN
Press [START] key.
After normal completion of writing
After failure of writing
SIMULATION 66-24
FAST MEMORY DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
SIMULATION 66-29
ADDRESS DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
66-30
Purpose Setup
Function (Content) Used to check TEL/LIU status change.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The TEL/LIU status can be checked.
The display is highlighted when the status is
changed.
HS1 Polarity reverse signal
HS2 Polarity reverse signal
RHS Handset hook SW
EXHS External telephone hook SW
66-31
Purpose Setup
Function (Content) Used to set the TEL/LIU status.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure Entry of only 0 or 1 is effective.
Shift the cursor to the bit to enter.
Cursor shift keys : : * , : #.
The bits are 1, 2, 3, 4, 5, 6, 7, and 8 from the left.
The entered bit is highlighted.
Press STRT to select the relay.
66-32
Purpose Setup
Function (Content) Used to check the received data.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The fixed data received from the line are
checked.
CHECKING Checking
OK Checking complete (Coincided)
NG Checking end (Not coincided)
SIMULATION 66-30
TEL/LIU SENSOR CHECK.
HS1 HS2 EXHS
RHS
10001100
SIMULATION 66-31
TEL/LIU SETTING.
INPUT 0 - 1, AND PRESS START.
MOVEMENT LEFT: [*] RIGHT: [#]
1. 2.CION 3. MR 4. EC
5. 6. 7. DP 8.
1 2 3 4 5 6 7 8
MPXA
S.
CML
SIMULATION 66-32
RECEIVED DATA CHECK.
CHECKING...(OK or NG)
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 21 ページ ２００４年１０月２６日 火曜日 午後３時４４分