Specifications

B. FAX mode
Main
code
Sub
code
Content Operational description
Initial
value
Set
range
22 11 FAX related counter
display
The current Fax related counters are displayed on the LCD.
14 FAX ROM Ver. Display The currently installed ROM version is displayed on the LCD.
24 14 FAX related counter
clear
The current FAX related counters are cleared.
• Transmission counter (Time, number of sheets)
• Reception counter (Time, number of sheets)
46 12 FAX mode density
adjustment (Overall
mode)
After warming up, shading is performed and the currently set density level
(Fine mode, auto exposure) is displayed. For the adjustment procedures,
refer to the previous descriptions.
14 FAX mode density
adjustment for each
resolution (Fine)
After warming up, shading is performed and the currently set density level
(Fine mode) is displayed. For the adjustment procedures, refer to the
previous descriptions.
15 FAX mode density
adjustment for each
resolution (Super fine)
After warming up, shading is performed and the currently set density level
(Super fine mode) is displayed. For the adjustment procedures, refer to the
previous descriptions.
16 FAX mode density
adjustment for each
resolution (Ultra fine)
After warming up, shading is performed and the currently set density level
(Ultra fine mode) is displayed. For the adjustment procedures, refer to the
previous descriptions.
64 02 User switch table print Used to print the currently set user switch table.
03 Soft switch setup table
print
Used to print the currently set soft switch. (FAX send counter, communication
time, option status, ROM version)
04 Dump list print Used to print the SRAM contents as a dump list in blocks of 0 – 127.
Select block 0 – 127 and press the START key to start printing.
66 01 FAX related soft SW
setup check/change
Used to check and change the current soft switch setup.
02 FAX related soft SW
clear (Excluding the
adjustment values)
Used to set the following soft SW to the default.
<Line signal adjustment value>
• Signal send level (SW5-5 – 8)
• DTMF send level (High group) (SW53-1 – 4)
• DTMF send level (Low group)(SW53-5 – 8)
• Make time (10PPS) (SW67-1 – 4)
03 FAX PWB memory
check
Used to check each memory installed on the FAX PWB.
Display
Copy quantity Transmission counter
Reception counter
Time Accumulated transmission time
Accumulated reception time
Display
FAX ROM: FAX PWB ROM version
CPU: FAX PWB CPU version
Key operation Display
<Memory>
1: DRAM
2: SRAM
3: FLASH
4: OPTION
5: PAGE
<Error status>
SUM NG: Check sum error
A-BUS NG: Address bus error
DATA NG: Data check error
D-BUS NG: Data bus error
ERASE NG: Data erase error
AR-FX2
5 – 3